VANTEC UGT-CR702 Dual LUN Card Reader Instruction Manual
- June 1, 2024
- VANTEC
Table of Contents
USB 3.2 Gen2x1 CFexpress Type B
and SD 4.0 UHS-II Dual LUN
Card Reader UGT-CR702
User Guide
www.vantecusa.com
UGT-CR702 Dual LUN Card Reader
Hardware Installation
*No drivers required for all Operating Systems
Spring Load Slot, Insert Label Face Up
Connect to devices
- Plug USB C cable to Card Reader
- Plug the other end of USB C cable to your system USB C port
- Insert your Media Card into the Card Reader Slot
- If the Media Card is new, it will need to be prep (initialize, partition, and formatted)
- If the Card is not new, the system File Manager will see the Data on the Card
QRCode to product Page, Drivers, Manual, and FAQ.
https://www.vantecusa.com/products_detail.php?p_id=318
UGT-CR702
Information in this document is subject to change without notice.
Reproduction of these materials in any manner whatsoever without written
permission is strictly forbidden.
v1.0
**** Printed on Recycled Paper.
Copyright © 2023 Vantec Thermal Technologies. All Rights Reserved.
All Registered Trademarks Belong to Their Respective Companies.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>