MOUNTUP MU1006 Vertical Dual Monitor Stand Instruction Manual
- May 15, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU1006 Vertical Dual Monitor Stand
Product Information
Specifications
- Product Dimensions:
- Width: 115mm / 4.53″
- Height: 844mm / 33.23″
- Depth: 75mm / 3″
- Weight: 2M
- Includes installation tools such as screwdriver, bubble level, and band tape
Product Usage Instructions
-
Step 1: Attach the Plate Component to Monitor
Select the appropriate monitor screw length (M4, M5, M6) and thread the screws into the back of your monitor. -
Step 1-1: Select Monitor Screw Length
Choose the correct screw diameter that fits your monitor (MA, MB, MC, MD, ME). -
Step 1-2: Attach the Plate Component
Attach the plate component to the monitor using the selected screws based on the monitor’s back type (flat or round). -
Step 2: Support Pillar Installation
Connect the two support pillars using the connecting plate and bolts. Tighten the bolts using the provided allen key. -
Step 3: Apply Foot Pads to the Base
Attach foot pads near the corners of the base to provide stability. -
Step 4: Attach Monitor with Plate Component to Pillar
Hang the monitors onto the support pillar and tighten them with handle bolts. Ensure the arrow mark on the plate component is pointing upwards. -
Step 5: Cable Management
Organize and manage cables for a tidy setup. -
Step 6: Adjustments (If necessary)
Make any necessary adjustments for swivel, tilt, and rotation based on your preferences.
Frequently Asked Questions (FAQ)
-
Q: What should I do if I have leftover hardware after assembly?
A: Not all hardware included may be used depending on your specific setup. You can keep the extra hardware for future use or contact customer service for guidance. -
Q: How do I ensure proper mounting of the monitor?
A: Follow the instructions carefully, select the correct screw length, and ensure a secure fit without over-tightening.
Safety Caution
BEFORE ASSEMBLY
- Layout all components and hardware. Check all parts are included and undamaged.
- Should anybody intends to install or use this monitor stand, please read and understand this manual carefully.
- If you do not understand these instructions or have any doubt about the safety instructions, assembly or use of this product, please contact our customer service.
WARNING
- This product contains small items that could be a choking hazard if swallowed.
- KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Installation Tools (Not Included)
Supplied Parts and Hardware
Product Dimensions
ASSEMBLY INSTRUCTION
- STEP 1: Attach the Plate Component to Monitor
- STEP 2: Support Pillar Installation STEP 4: Attach Monitor with Plate Component to Pillar
- STEP 3: Apply Foot Pads to the Base
- STEP 4: Attach Monitor with Plate Component to Pillar
- STEP 5: Cable Management
- STEP 6: Adjustments (If necessary)
- STEP 6: Adjustments (If necessary)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>