MOUNTUP MU9138 Universal Speakers Stands Pair Installation Guide
- June 1, 2024
- MOUNTUP
Table of Contents
MOUNTUP MU9138 Universal Speakers Stands Pair
INSTALLATION GUIDE
Model: SB-204_US1.0
If you have any questions, please feel free to contact our customer support before returning.
Safety Caution
BEFORE ASSEMBLY
- Please check and make sure all necessary accessories are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts.
- Please read and understand this manual carefully before installation.
WARNING
- This product contains small items that could be a choking hazard if swallowed. KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD.
SUPERVISION IS REQUIRED.
- Improper installation, such as using the product for speakers over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use.
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of speakers or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).
Supplied Parts and Hardware
NOTE: Not all parts and hardware included will be used.
Product Dimensions
INSTALLATION
1. Install the Base Foot Pad
Choose rubber feet or carpet nails according to your floor type.
Option 1: Hard Floor
If the stand is placed on wooden, cement, tile or other hard floor, install the rubber pads (M) and adjust them to level if the base is not level.
Option 2: Carpet
If the stand is placed on carpet, install the carpet nails (N).
And adjust them to level if the base is not level.
2. Install the Bottom Tube
Insert bottom tube (3) into base (2), then tighten bolts (A) by using Allen key (M-C).
Insert plastic cover (5) into bottom tube (3).
3. Install the Upper Tube
Choose the threading method based on the size of the cord plug.
Loosen the knob on upper tube (4). Insert upper tube (4) into bottom tube (3),
then tighten bolts (M-A) by using Allen key (M-C).
Option 1: Insert through upper tube, pull out from base.
Option 2: Insert through base, pull out from upper tube.
4. Install the Support Bracket
Insert support bracket (1) onto upper tube (4), then tighten bolt (M-B) by using Allen key (M-C).
5. Install Speakers
1. Measure the width of your speaker.
2. Loosen the support bracket (1) and adjust the graduated ruler to the width
of the speaker. Then lock it.
Pull the spring-loaded plate to place the speaker in the centre of the support bracket (1).
If necessary, install the fixing bar to stabilise the speaker
6. Adjustment
1. Insert the power cord plug into the speaker.
2. Adjust the speaker to the left or right so that it is parallel to the
base.
3. Adjust the upper tube height, then tighten the knob bolt.
Specifications
- Load Capacity: MAX 5 kg (11 lbs)
- Product Dimensions:
- Base Foot Pad: 1.8″ (46mm)
- Bottom Tube: MIN 34″ (865mm) – MAX 43.3″ (1100mm)
- Upper Tube: MIN 5.1″ (130mm) – MAX 10″ (254mm)
- Support Bracket: 9.8″ (250mm) x 9.8″ (250mm)
FAQ
1. What is the maximum load capacity of this product?
The maximum load capacity is 5 kg (11 lbs).
2. Can this product be used outdoors?
No, this product is intended for indoor use only to prevent product failure and personal injury.
3. How often should I check the bracket for safety?
The bracket should be checked at least every three months to ensure it is secure and safe to use
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>