UTILITECH MQTL1183 3-IN-1 Recessed Downlight Instruction Manual
- June 9, 2024
- UtiliTech
Table of Contents
UTILITECH MQTL1183 3-IN-1 Recessed Downlight
Thank you for purchasing this Utilitech product. We’ve created these easy-to-
follow instructions to ensure you spend your time enjoying the product instead
of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 866-994-4148, 8 a.m. – 8
p.m., EST, Mon day – Sunday. You could also contact us at
partsplus@lowes.com.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT START YOUR NEXT PROJECT
Visit www.lowes.com for more information.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|
Fixture does not light.
| Power is off, incorrect wire connection, or defective wall switch.
.
| Check circuit breaker or wall switch, check wire splices, or replace wall switch.
CARE AND MAINTENANCE
- Ensure power is off before cleaning.
- Clean with a mild glass cleaner and soft cloth.
- Apply liquid cleaner to cloth.
- Do not spray fixture itself
WARRANTY
This fixture is warranted to be free from defects in materials and workmanship for five (5) years from the date of original purchase. Call 866-994-4148 to obtain a Return Authorization number and further instructions. The manufacturer will be liable for the replacement of the defective item and will not be liable for any other loss, damage, or injury which is caused by the product.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
- Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for installation of LED retrofit kit. Check for enclosed wiring and components.
SAFETY INFORMATION
- Risk of fire or electric shock. LED retrofit kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- The default setting for this fixture is the downlight mode. To switch to the night light mode, simply turn off the light using the wall switch while the downlight is on and then quickly turn it back on.
CAUTION
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
PLAN A
PLAN B
PLAN C
Documents / Resources
|
UTILITECH MQTL1183 3-IN-1 Recessed
Downlight
[pdf] Instruction Manual
MQTL1183 3-IN-1 Recessed Downlight, MQTL1183, 3-IN-1 Recessed Downlight,
Recessed Downlight, Downlight
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>