UTILITECH 7150-12-L Bath Fan Control Switch with Timer Wall-Mounted LCD Touch Panel Installation Guide
- June 8, 2024
- UtiliTech
Table of Contents
UTILITECH 7150-12-L Bath Fan Control Switch with Timer Wall-Mounted LCD
Touch Panel
READ AND SAVE THESE INSTRUCTIONS
PRODUCT SPECIFICATIONS
| Voltage: AC120V/60Hz | Max Power of connecting electrical appliance: AC120V/1A |
|---|---|
| Electrical Appliance Type: Electric lamp and motor type fan for home use |
Prevailing Ambient Temperature: 32ºF – 104ºF (0º C – 40º C)
Packaging and Hardware Contents
Switch, plastic wire connectors, screws, and instruction manual
Wiring Diagram
CAUTION
- For indoor use only.
- Installation Location: Wall.
- This product can be used in the bathroom with a GFCI protection circuit.
- The operating control must be grounded.
- Storage Temperature: -4ºF – 140ºF (-20º C – 60º C).
- Output 2 cannot be connected to the motor.
IMPORTANT! READ BEFORE INSTALLATION
- All electrical wiring must comply with the National Electrical Code ANSI / NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- To reduce the risk of fire or injury, do not use this product with any variable wall controller.
- The wrong wiring connection will damage the operating control.
PREPARATION
Tools required for assembly: Phillips screwdriver and wire stripper.
INSTALLATION & OPERATING INSTRUCTIONS
-
Connect the switch according to the wiring diagram.
-
Press the ON/OFF icon on the switch. Once the ON/OFF indicator light icon turns on, the switch has received the electrical connection.
-
Press the desired function icon. Once the indicator light of the corresponding function turns on, the function will start.
For example, when you press the fan control icon, the fan control indicator light will turn on and the fan will begin operating. -
Press a function icon again. Once the indicator light of the corresponding function turns off, the function stops. For example, when you press the fan icon a second time, the fan control indicator light will turn off and the fan will stop operating.
-
When the light is on, long press the light icon to dim the light.
-
To turn on the bath fan timer, press the timer icon and select a time.
Questions, problems, missing parts? Before returning to the store, call our customer service department at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at [email protected].
ITEM # 4984546 MODEL 7150-12-L