UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum Fan User Manual

June 4, 2024
UtiliTech

SFDC-900F 36 Inch Industrial High-Velocity Drum Fan
User Manual
ITEM #0416731
MODEL #SFDC-900F
UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum
Fan

Utilitech & UT Design® is a registered trademark of LF, LLC. All Rights Reserved.

ATTACH YOUR RECEIPT HERE
Serial Number…………..
Purchase Date………..

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY
A Fan body 1
B Wheel 2

HARDWARE CONTENTS (shown actual size)

**** SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

  1. Please unplug the fan before moving it or performing maintenance. Don’t touch the fan when your hands are wet.
  2. Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
  3. Please unplug the fan when it is not in use.
  4. Please don’t unplug the fan by holding the cable cord. Unplug by holding the plug.
  5. Please don’t use the fan when there is damage to the cable cord or plug.
  6. Please don’t use the fan with an extension cord.
  7. Please don’t use the fan close to fires.
  8. Please don’t insert your hand or other objects into the guard or the movable parts.
  9. To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
  10. If the supply cord is damaged, it has to be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid hazards.

CAUTION

  1. Please unplug the fan from the socket and clean it with a soft cloth.
  2. Do not immerse the fan.
  3. Please fit the guard onto the fan before starting it up the fan.
  4. This fan is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the fan by a person responsible for their safety. Supervise children to ensure they do not play with the fan.

PREPARATION

Before beginning the assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 2 minutes Tools Required for Assembly (not included): Pliers

ASSEMBLY INSTRUCTIONS

  1. Feed the Wheels (B) through the brackets on the Fan Body (A) of the fan assembly.
    UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum Fan -
assembly

  2. To secure the wheels, insert a pin (AA) into the hole. Bend the pin.
    UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum Fan - bend the
pin

OPERATING INSTRUCTIONS

  1. Adjust the desired speed by rotating the switch knob
    0 Stop|  1 Low| 2 High
    ---|---|---

CARE AND MAINTENANCE

Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. In order to remove the dust from the protective screen, use a vacuum cleaner or remove the front protective screen by removing the securing screw on the edge of the screen with a screwdriver. After cleaning, remount the safety screen. After doing this, fasten the securing screw on the edge of the protective screen.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The fan fails to operate. 1. Fan may not be plugged in.
2. There may some be obstructions in the fan. 1. Make sure the fan is

plugged in and the electrical outlet is working properly.
2. Check for any obstruction. If you find an obstruction, turn the fan”OFF”. Unplug the fan and carefully remove the obstruction. Plug the fan in and turn it on again, referring to the OPERATING INSTRUCTIONS.

WARRANTY

TWO-YEAR LIMITED WARRANTY. The manufacturer warrants this product to be free from manufacturing defects in material and workmanship. This warranty does not cover transit damages. This warranty does not apply to damages from an accident, misuse, or alteration of any kind to the fan or where the connected voltage is more than the nameplate voltage. This warranty does not apply to the finish on any portion of the product. Servicing performed by unauthorized persons shall render the warranty invalid. For warranty service, contact Customer Service at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday -Sunday.
Some states do not allow the limitation or exclusion of certain damages. Therefore, these limitations and exclusions may not apply to you. This warranty gives the consumer specific legal rights. You may have other rights that vary from state to state.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday -Sunday.
UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum Fan - part
list

PART DESCRIPTION PART #
A Blade SFDC-900E-01
B Capacitor SFDC-900E-02
C Switch SFDC-900E-03
D Switch knob SFDC-900E-04

Questions, problems, missing parts?
Before returning to your retailer, call our customer service department at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday -Sunday.
BM19380

Documents / Resources

| UTILITECH SFDC-900F 36 Inch Industrial High Velocity Drum Fan [pdf] User Manual
SFDC-900F, 36 Inch Industrial High Velocity Drum Fan, SFDC-900F 36 Inch Industrial High Velocity Drum Fan, Industrial High Velocity Drum Fan, High Velocity Drum Fan, Drum Fan, 0416731
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

UtiliTech User Manuals

Related Manuals