UTILITECH SFD1-500B 20 Inch High Velocity Shroud Fan Instruction Manual
- June 9, 2024
- UtiliTech
Table of Contents
UTILITECH SFD1-500B 20 Inch High Velocity Shroud Fan
PACKAGE CONTENTS
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
WARNING
- Please unplug the fan before moving it or performing maintenance. Don’t touch the fan when your hands are wet.
- Those who are not qualified electricians should not disassemble, repair or rebuild the fan.
- Please unplug the fan when it is not in use.
- Please don’t unplug the fan by holding the cable cord. Unplug by holding the plug.
- Please don’t use the fan when there is damage to the cable cord or plug.
- Please don’t use the fan with extension cord.
- Please don’t use the fan close to fires.
- Please don’t insert your hand or other objects into the guard or the movable parts.
- To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- If the supply cord is damaged, it has to be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
- The rules about cord and plug as below:
This product employs overload protection (fuse). A blown fuse indicates an overload
or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
User Servicing Instructions
- Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
- Open fuse cover.
- Remove fuse carefully.
- Risk of fire. Replace fuse only with 5 Amp, 125 Volt fuse.
- Close fuse cover.
CAUTION
- Please unplug the fan from the socket and clean it with a soft cloth.
- Do not immerse the fan.
- Please fit the guard onto fan before starting up the fan.
- This fan is not intended for use by people (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the fan by a person responsible for their safety. Supervise children to ensure they do not play with the fan.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 1 minute
ASSEMBLY INSTRUCTIONS
- Press the button on the bracket (A) on the fan assembly. Insert the bracket (A) into the base (B) until the button on the bracket (A) pops into the hole on the base (B).
OPERATING INSTRUCTIONS
- Adjust the desired speed by rotating the switch knob
- Tilt the fan head up or down for desired direction of air flow.
CARE AND MAINTENANCE
Unplug the appliance before cleaning. Don’t use any water for cleaning metal surfaces. Slightly moisten a cloth and then wipe off the surfaces of the fan. In order to remove the dust from the protective screen, use a vacuum cleaner or remove the front protective screen by removing the securing screw on the edge of the screen with a screwdriver. After cleaning, remount the safety screen. After doing this, fasten the securing screw on the edge of the protective screen.
TROUBLESHOOTING
PROBLEM/POSSIBLE CAUSE/CORRECTIVE ACTION
The fan fails to operate.| 1. Fan may not be plugged in.
2.There may some be obstructions in the fan.
| 1. Make sure the fan is plugged in and electrical outlet is working properly.
2. Check for any obstruction. If you find an obstruction, turn the fan”OFF”. Unplug the fan and carefully remove the obstruction. Plug the fan in and turn it on again, referring to the OPERATING INSTRUCTIONS.
---|---|---
WARRANTY
TWO-YEAR LIMITD WARRANTY. The manufacturer warrants this product to be free from manufacturing defects in material and workmanship. This warranty does not cover transit damages. This warranty does not apply to damagesfrom accident, misuse, alteration of any kind to the fan or where the connected voltage is more than the nameplate voltage. This warranty does not apply to the finish on any portion of the product. Servicing performed by unauthorized persons shall render the warranty invalid. For warranty service, contact Customer Service at 1-866-994-4148, 8 a.m. -8 p.m., EST, Monday-Sunday
Some states do not allow the limitation or exclusion of certain damages. Therefore, these limitations and exclusions may not apply to you. This warranty gives the consumer specific legal rights. You may have other rights that vary from state to state.
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday Sunday.
| PART | DESCRIPTION | PART# |
|---|---|---|
| A | Blade | SFD1-500B-01 |
| B | Capacitor | SFD1-500B-02 |
| C | Switch | SFD1-500B-03 |
| D | Knob | SFD1-500B-04 |
Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-866-994-4148, 8 a.m. – 8 p.m., EST, Monday -Sunday.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>