BOCCI 57.14 Pendant Light User Manual

: June 9, 2024
: BOCCI

Table of Contents

ROUND
57.14 PRODUCT SPECIFICATION
DESCRIPTION
NOTES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROUND

57.14 PRODUCT SPECIFICATION

53 (2”)
adjustable up to 3000 (10’) standard
adjustable up to 30500 (100’) custom
±100-165 (4-6”)
378 (15”)
508 (20”)

PENDANTS: fourteen
MOUNTING: white powder coated round canopy 508mm (20”) in diameter x 53mm (2”) deep
LAMPING: 1.5w LED
COAX: fixed lengths. 3000mm (10’) standard / up to 30500mm (100’) maximum
MATERIALS: blown and dipped glass, cast borosilicate glass cap, braided metal coaxial cable, electrical components, white powder coated canopy
WEIGHT: approximately 27kg (59lb)
POWER SUPPLIES: integral

DESCRIPTION

57.14 is a random configuration of fourteen 57 pendants hung from a round canopy. The drop lengths of the pendants are randomized between a client specified range of heights to variously cluster and scatter. The result is an ambient installation or field of light.

57 is an exploration of a technique used for producing closed cell foam. The process involves trapping voids of air of different sizes and configurations within a glass matrix, yielding a shape loosely referencing a rain cloud. These pockets of air remain invisible when the piece is off, but come alive to reveal an interior universe when the piece is illuminated. By virtue of the fabrication process, each piece is completely unique.

NOTES

+ Purchase replacement lamps online at www.bocci.com/shop/bulbs
+ As an alternative to a built-in power supply, Bocci recommends mounting power supplies remotely in an easily accessible and hidden location for ease of long-term maintenance.

US Patent # D796732
EU Design Patent # 002268581-0001 to 0006

LOW VOLTAGE LUMINAIRE
E476186

Made in Vancouver, Canada

1
Note: All connections and power supplies are tested by our technicians before shipping. However, it is possible for ports/ power supplies to come loose or damage during shipping.

Test each port before installing canopy to ceiling to catch any loose connections or faulty power supplies.

Measure and mark the light fixture canopy position on the ceiling

plywood dimensions
structural substrate
fasteners (provided)
fasteners (by client)
all dimensions in mm

2
Note: The client is responsible for providing a robust 16mm (5/8”) plywood backing or wood blocking to securely anchor to the structural substrate.

Connections from the plywood to the structural substrate are the client’s responsibility.

Measure the plywood so that it fits within the canopy side walls (refer to detail above).

Anchor the plywood backing to the structural ceiling substrate.

REMOTE
line voltage
black (LED)
brown (230V)
black (110V)
white (LED)
blue (230V)
white (110V)
INTEGRAL
ground
bare copper
Neutral (white)
Line (black)
black (LED)
brown (230V)
black (110V)
white (LED)
blue (230V)
white (110V)

3
Connect power supplies to line voltage.

LED: connect the black wire to black and white wire to white wire.

For the ground connection, connect the green wire with yellow stripe to the bare copper wire or green wire in the junction box.

Note: Bocci strongly recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certified personnel to ensure compliance with the code.

4
Anchor canopy into the plywood backing using the fasteners provided.

Turn power to fixture on.

Very carefully uncoil the braided coaxial cable in a spool like manner. Insert your index fingers into opposite sides of the roll then rotate your fingers around each other to unroll the coaxial cable.

Use patience: allow the cable to uncoil completely to avoid kinks.

5
Attach lamp to the lamp holder.

BOCCI 57.14 Pendant Light B06

6
Slide the brass cap onto the coaxial cable

7
Each pendant terminates in a “head phone jack” type connector, which plugs into a receiving receptacle in the canopy. Clients are encouraged to compose their own pendant configuration on site, thus creating a truly unique fixture. After plugging in each pendant, turn the threaded sheath into place by hand ensuring that it is adequately tightened. Tools are not required.

Check that each lamp is working properly as you go along by keeping power to the fixture on and lamps plugged in.

8
Insert the lamp assembly into the glass pendant.

9
Thread the brass cap onto the pendant.

BOCCI 57.14 Pendant Light B10