TESLA Głowica Smart Style Thermostatic Head User Manual

: June 9, 2024
: Tesla

TESLA Głowica Smart Style Thermostatic Head

TESLA Głowica Smart Style Thermostatic Head product

Overview

The thermostatic valve, using dry battery power supply, without wiring, is easy to install, serves to regulate the temperature of the hot water radiator, ensuring a comfortable temperature, reducing energy consumption and thus saving heating costs. This product features a built-in low power ZigBee wireless communication module and LCD display. The thermostatic valve can be used on its own or the device can be connected to the Tesla Smart app to create a smart thermostat. Once the thermostatic valve is connected to the Tesla Smart app, the app can be used to select the mode, control the temperature, set the schedule and timer, activate/deactivate the child lock, and set the open window detection feature. Any changes made to the device, such as manual temperature settings, will be synchronized with the app.

Features

3 modes Automatic mode, Manual mode, Anti-freezing mode.
Temperature range setting for Automatic and Manual mode is 5~30 °C and for Anti-freezing Mode 5~15°C.
Easy to read LCD display.
Battery life depends on the network connection. In case of active network connection, the battery life is 1~2 years and 2~3 years in case of standalone use.
ZigBee wireless communication protocol safe, reliable and practical.
Easy connection to Tesla Smart system.

Device Description

LCD display screen
Knob / Press: Setting mode / Rotate: Adjusting
Interface nut
Error
Low battery
Your set temperature
Open window detection
Automatic mode
Manual mode
Installation mode
Network connection
Child lock

Installation Instruction

Battery insertion

Turn the outer case in the direction of the arrow and then pull.
In accordance with the marks indicating the battery poles, insert two AA alkaline batteries into the battery compartment.
Note: Do not use rechargeable batteries.
After inserting the batteries, the display will show the current temperature and symbol.
Replace the outer case and turn it in the direction of the arrow.

Start to use

Prepare the thermostatic head for use in the following few steps. TESLA
Głowica Smart Style Thermostatic Head 05

Press the knob and hold for 3 seconds before installing the thermostatic head on the valve.
Until the appears and the symbol flashes, the thermostatic head will vibrate slightly.
Align the interface nut of the thermostatic valve with the radiator valve. Then push forward slightly and turn the interface nut clockwise until they are tight. The maximum torque is 5 Nm.
Press the knob again and the symbol will appear.
After approximately 10 seconds, the symbol will disappear and the current temperature will be displayed. The installation of the thermostatic head is now complete.

To minimize the effect of the radiator‘s own heat on the thermostatic valve, it is recommended to be installed as follows: TESLA Głowica Smart Style
Thermostatic Head 08

Automatic Detection

After installation, the thermostatic valve automatically adapts to the heating system. During this process, the thermostatic valve responds more slowly or heats/cools itself. This is completely normal and a necessary part of the adjustment process.
The thermostatic valve will close the radiator valve at a certain time and then reopen it to determine the exact position of the valve opening. The automatic detection function allows for the most efficient heating and more accurate temperature control.
If necessary, replace the batteries and activate the installation mode to manually start the auto-detection function.

Valve Information

Installation diagram of valve A.
Installation diagram of valve B.

Instructions for Use

Manual Mode Setting

In standby mode, you can switch between three modes at the touch of a button: Auto Mode, Manual Mode and Anti-freezing Mode.

Automatic mode
In automatic mode, the thermostatic valve automatically switches to the desired temperature, e.g. 21 °C when you are at home, 17 °C when you are sleeping, or 15 °C when you are away. For Auto mode, the thermostatic valve must be connected to an access gateway (ZigBee hub) and requires a network connection.
Manual mode
In manual mode, the temperature you set will not change. The temperature can be adjusted manually using the knob. The temperature range is 5~30 °C.
Anti-freezing Mode
If you are away from home for an extended period of time, set the thermostatic head to anti-freezing mode. The temperature range is 5~15 °C. This mode is mainly designed to protect the water pipes from freezing at low temperatures.

Manual Temperature Setting

In standby mode, the temperature can be adjusted by turning the knob after pressing it.

Manual Child Lock Setting

The child lock function can be switched on or off by long pressing the knob. If the child lock function is switched on, no changes can be made to the thermostatic valve to prevent unwanted changes to the settings. TESLA Głowica
Smart Style Thermostatic Head 12

Press the knob for more than 3 seconds.
A symbol appears to indicate that the child lock has been activated. If you perform step 1) again, the child lock will be deactivated.

Preparation for Use

Installation of Tesla Smart App

The Tesla Smart App is available for both iOS and Android OS. Search for „Tesla Smart“ in the Apple App Store or Google Play store or scan the QR code to download the App.
Sign up and log in to the Tesla Smart App.

Gateway Setup

Click on „Add device“.
In the left panel of the App screen, select „Gate-ways“ and then select the appropriate gateway (hub), e.g. „Tesla Smart ZigBee Hub“.
Follow the instructions for pairing your device directly in the Tesla Smart App. Please note: The gate-way (hub) and the smartphone you want to control the device with must be connected to the same 2.4GHz Wi-Fi network.

Thermostatic Valve Setup

A quick triple click on the thermostatic valve knob in standby mode will enter pairing mode. The pairing process takes approximately 2 minutes.

Click on „Add device“.
In the left panel of the App, select „Thermostatic Valves“ and then click on „Tesla Smart TRV Style“.
Select the gateway (hub).
Activate the pairing mode on the thermostatic valve.
Wait for the device pairing process to complete.
Now you can fully control the thermostatic valve with your smartphone.

App Settings

Mode Selection
You can switch between Auto Mode, Manual Mode and Anti-freezing Mode using the app. See section 5.1 for a description of each mode.

Temperature Setting
The App supports setting different temperature modes by simply swiping your finger to the desired temperature (drag the wheel to set the temperature).

Child Lock Setting
The child lock can be activated or deactivated in the App, see the following image. If the child lock function is activated, no changes can be made to the thermostatic valve to avoid unwanted changes to the settings.

Open Window Detection Setting
You can activate or deactivate the open window functions in the application, see the following image. If the open window function is activated and the thermostat detects that a window is open, the valve will close for 30 minutes to reduce heat loss. By default, the open window feature is activated. If the function has been deactivated and you want to reactivate it, follow these steps.

Valve Detection Setting
The valve detection function can be activated or deactivated in the App, see the following image. If the valve detection function is activated, the valve will be automatically checked if necessary. By default, the function is deactivated and you want to reactivate it, proceed as follows.

Automatic Mode Setting

Click on the icon.
Click on the „Add Timing“ button.
Set the time, temperature, mode and save.
Click the „Back“ button.
Done.

Technical Specifications

Power input	DC3V (AA x2, alkaline batteries)
Standby current	Without network ≤ 100 μ A Networking ≤120 μ A
Maximum current	≤ 800 mA
Connection	ZigBee ®
Wireless distance	≥30meters @in an open air
Temperature Setting	Automatic mode 5~30 C˚ Manual mode 5~30 C˚ Anti

INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electro-nic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

EU DECLARATION OF CONFORMITY

Hereby, Tesla Global Limited declares that the radio equipment type TSL-TRV- GS361A is in compliance with 2014/53/UE directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc

Connectivity: ZigBee IEEE 802.15.4
Frequency band: 2.400~2.484 GHz ZigBee
Max. radio-frequency power (EIRP): 19dBm

Manufacturer
Tesla Global Limited
Far East Consortium Building,
121 Des Voeux Road Central
Hong Kong
www.teslasmart.com