LANCOM 1640E VPN Router User Guide

LANCOM 1640E VPN Router

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

CONNECTION

1. WAN interface

   • Connect the WAN interface to your WAN modem using the enclosed ethernet cable with the dark green connectors.

2. Ethernet interface

   • Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 3 to your PC or a LAN switch.

3. Configuration interface

   • Configuring the device via the serial interface requires a serial configuration cable (available as an accessory).

4. USB interface

   • You can use the USB interface to connect a USB printer or a USB storage device.

5. Reset button

   • Pressed up to 5 seconds: device restart
   • Pressed until first flashing up of all LEDs: configuration reset and device restart RESET

6. Power

   • When connecting the cable to the device, turn the bayonet connector 90° clockwise until it clicks into place.
   • Use only the supplied power adapter.

Please observe the following when setting up the device

• The power plug of the device must be freely accessible.
• For devices to be operated on the desktop, please attach the adhesive rubber footpads
• Do not rest any objects on top of the device
• Keep all ventilation slots on the side of the device clear of obstruction
• In case of wall mounting, use the drilling template as supplied
• Rack installation with the optional LANCOM Rack Mount (separately available)
• Please note that support service for third-party accessories is excluded.

Mounting & connecting

SPECIFICATION

The additional power LED statuses are displayed in a 5-seconds rotation if the device is configured to be managed by the LANCOM Management Cloud.

This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.

Hereby, LANCOM Systems GmbH

Adenauerstrasse 20/B2

D-52146 Wuerselen declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

LANCOM, LANCOM Systems, LCOS, LAN community and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>