SAVAGE LED-RL-BI-16 Vlogger Ringlight User Manual
- June 9, 2024
- SAVAGE
Table of Contents
SAVAGE LED-RL-BI-16 Vlogger Ringlight
INRODUCTION
Thank you for purchasing the Savage Vlogger Ring light. Please read this instruction manual before use, and keep for later reference.
INSTALLTION INSRUCTION
MOUNT TO LIGHT STAND & TIGHTEN KNOB
ATTACH AC POWER CORD
- Mount light to any light stand with a 5/8” spigot and tighten using the knurled knob on the side of the light stand adapter
- 1Attach the AC power cord into the back right of the ring light and then plug into any household socket.
- To turn on, tap the On/Off button on the front of the panel.
- Press the brightness button (B+) to brighten or the dimming button (B-) to dim.
- Tap the Mode button three times to cycle through color temperature presets of 5700K, 4500K and 3200K.
- For vlogging or selfies, slide the mirror into the shoe mount in the inner center of the ringlight. Tighten the knurled knob to secure the mirror.
- Mount up to two cell phones to record from multiple devices if desired. Thread the two included bendable arms into the 1/4”-20 threaded holes inside the shoe mounts on the right and left inside bottom of the ringlight. Thread the silver ball head onto the top of each bendable arm until secure.
- The cell phone holders are adjustable and fit almost any size phone. Simply press the side of the cell phone against the top of the cell phone holder until the phone slips into place. The cell phone holder’s tension spring will hold the phone securely. Do not transport the ring light with cell phones attached as the vibration could allow the phone to detach from the holder.
professional photography made simple
800.624.8891 SavageUniversal.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>