BRESSER F004548 BR-20 RGB LED Tube Instruction Manual

: June 9, 2024
: BRESSER

Table of Contents

BRESSER F004548 BR-20 RGB LED Tube
GENERAL WARNINGS
PARTS LIST
POWER SUPPLY
CLEANING
TECHNICAL DATA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRESSER F004548 BR-20 RGB LED Tube

GENERAL WARNINGS

DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach of children and animals. Never touch parts of the device during operation or before it has cooled down completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light. The high luminosity can cause glare to the eyes and afterimages. This impairment of vision can lead to accidents.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over the connection cables of the device. The device could be knocked over. The manufacturer accepts no liability for damage to property caused by improper or insufficiently safe installation! Only use the recommended power supply unit or the recommended rechargeable batteries. The manufacturer accepts no liability for voltage damage caused by the use of an unsuitable power adapter!

DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power source (power adapter). Only use the device as described in the manual. Otherwise, you run the DANGER of an ELECTRIC SHOCK. Never bend, squeeze or pull power cables, connecting cables, extensions or connectors. Protect cables from sharp edges and heat. Check this device, cables and connections for damage before use. Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be replaced immediatelyby an authorized service agent. Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.

FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and ensure that it is stored in a reasonably safe place.

Keep children and animals away from the device! They could knock the device over.
Make sure that no one can trip over connection cables. The device could be knocked over.
Do not expose the device to high temperatures. Do not short-circuit the device or dispose of in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!
Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled down completely!
Only use the recommended power supply4 unit or batteries3!

IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary. Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work. Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.To disconnect the unit from the mains, always pull the mains plug and never pull the cable! Do not subject the device to excessive vibrations.

PARTS LIST

(Fig. 1-3)

Battery latch & release
Battery slot
LED display
UP button
MODE button
Decrease (-)
DC connection socket for barrel connector
Increase (+)
Power switch
DOWN button

DELIVERY CONTENT (Fig. 1-3)
LED Light tube (1x), remote control (1x), battery charging station (1x), NP-F550 battery (2x), bag (1x), instruction manual (1x)

POWER SUPPLY

NOTE: This device is powered by a rechargable battery pack (Sony type NP-F). Before commissioning, make sure that it is fully loaded. You can also use an external power supply (not included).

INSTALLING THE BATTERY PACK
Make sure the switch is off and place the sufficiently charged and compatible battery (Sony type NP-F) on the backside of the LED light into the battery slot as shown by the arrows. Press the Power switch to power on the device. Remove the battery after use.

REMOVING THE BATTERY PACK
Press the battery release and then slide to take out the battery.

SPECIAL LIGHTING EFFECTS MODE
In the mode of bi color or RGB color selection, long press the M button to enter the mode of programmed special lighting effect. Another long press of the M button will exit. In the mode of special lighting, shortly press M button to switch among different special lighting options. Press the UP / DOWN button to increase or decrease the brightness;Press the + or – button to adjust the flash frequency of the scenario lighting.

F1: Paparazzi
F2: Fireworks
F3: Bad bulb
F4: Thunder flash
F5: TV
F6: Flicker
F7: RGB loop
F8: Police car
F9: Ambulance
F10: Fire engine
F11: Party
F12: Campfire
F13: SOS

EXTERNAL POWER SUPPLY
If you want to use a mains adapter (8V, 3A), the battery power supply will be cut off automatically. Please note that the battery will not be charging when the mains adapter is in use.
INFRARED CONTROL
Control the power switch, dimmer, color temperature, color selection and special lighting effects through the infrared remote control.

OPERATING AND USING THE DEVICE

Slide the power switch as shown by the arrow to turn on the light.
ADJUSTING THE BRIGHTNESS
In the mode of bi-color, press the UP or DOWN button to increase or decrease the brightness.
ADJUSTING THE COLOR TEMPERATURE AND SELECTING RGB COLORS
Press the M button to change between the mode of bi-color and RGB color selection. In the mode of bi-color, press the + or – button to adjust the color temperature from 3000K to 6000K. In the mode of RGB color, press + or – button to choose the option of saturation, dimmer and hue. When the selected option is flickering, press the UP or DOWN button to change the value.

DISPOSAL
Dispose of the packaging materials by type. Contact your local waste-disposal service or environmental authority for information on the proper disposal. Do not dispose of electronic devices in the household garbage! According to the European Directive 2002/96/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner. Observe the current legal regulations when disposing of the device! Information on proper disposal can be obtained from municipal waste disposal service providers or the Environmental Agency.

CLEANING

Before cleaning the device, disconnect it from the power supply (remove plug or remove batteries)! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Protect the device from dust and moisture. Store it in the supplied bag or transportation packaging. The batteries should be removed from the unit if it has not been used for a long time.

DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at www.bresser.de/download/F004548/CE/F004548_CE.pdf

DECLARATION OF CONFORMITY
A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. This can be viewed at any time upon request at www.bresser.de/download/F004548/UKCA/F004548_UKCA.pdf

TECHNICAL DATA

Model	20RGB
Art. No.	F004548
Type	LED light tube
LED illuminant	0.2 Watts High Bright SMD LEDs 99 daylight LEDs + 99

tungsten LEDs +

60 RGB LEDs

The LEDs have a long lifetime and are not replaceable due to technical reasons.
The power of an LED lighting is higher than that of conventional halogen lights. Therefore, LED’s have a lower wattage than comparable lights.
Only use recommended accessories! 4 Mains adapter not included

GUARANTEE
The regular warranty period is 5 years and begins on the day of purchase. You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de/warranty_terms.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/warranty_terms