BRESSER BR-64B LED Video Lights Instruction Manual

BR-64B / BR-96B
LED Video Lights
Art. No. F004352
F004353
INSTRUCTION MANUAL

BR-64B LED Video Lights

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

https://www.bresser.de/PF004352

|

https://www.bresser.de/PF004353

---|---

WARRANTY

http://www.bresser.de/warranty_terms

ABOUT THIS INSTRUCTION MANUAL

NOTE
These operating instructions are to be regarded as an integral part of the device. Read the safety instructions and the operating instructions carefully before using this device.
Keep this instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction manual must be handed over to the new owner/user of the product.

GENERAL SAFETY INSTRUCTIONS

DANGER OF BLINDING!
Make sure that people and animals do not look into the light. The high luminosity can cause glare to the eyes and afterimages. This impairment of vision can lead to accidents.
DANGER OF DAMAGE TO PROPERTY!
Always place the device in such a way that it cannot tip over and ensure that it is stored in an appropriate safe place.

• Keep children and animals away from the device! You could knock the device over!

Do not expose the device to excessively high temperatures.
Do not subject the device to excessive vibrations.
When mounting on adaptors or on tripods and tilt/articulating heads, always ensure a secure screw connection.
The manufacturer accepts no liability for damage to property caused by improper or insufficiently safe installation!
Only use the recommended power supply for the power supply or charging of the integrated battery!
The manufacturer assumes no liability for voltage damage caused by the use of an unsuitable voltage supply!
DANGER OF AN ELECTRIC SHOCK!
This unit contains electronic parts that are powered by a power source (AC adaptor or batteries). Only use the device as described in the instructions.
Never bend, squeeze or pull power cables, connecting cables, extensions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorised service agent.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
FIRE/EXPLOSION HAZARD!
Do not short-circuit the device or dispose of it in fire! Excessive heat and improper handling can cause short circuits, fires and even explosions!

• Never cover the ventilation slots or cooling fins of the device during operation or until it has cooled down completely!

Only use the recommended power supply for the power supply or charging of the integrated battery!
IMPORTANT NOTES
Never take the device apart. In the event of a defect, please contact your dealer. They will contact the Service Centre and can arrange the return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the appliance is not in use, in case of a longer interruption of operation and before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power supply at any time. The power outlet should always be near your appliance and should be easily accessible, as the plug of the power cord serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug and never pull the cable!

SCOPE OF DELIVERY (FIG. 1)

1x LED video light (A), 1x mini table tripod (B), 1x ball head (C), 1x smartphone adapter (D), 1x diffuser attachment (E), 1x carrying bag (F)
Additionally required (not included in the scope of delivery):
USB power adaptor 5V/2.8A, USB charging cable (USB-A to USB-C)

PARTS OVERVIEW (FIG. 2)

1. LED panel
2. Cooling fins (rear side)
3. USB-C port (input)
4. USB-A connection socket (output) (not for Art. No. F004353)
5. BOOSTER key
6. On/Off switch
7. Function button / selector switch
8. Display
9. Hole for the hand carrying strap
10. 1/4″ mounting thread (tripod connection)

UNPACKING, SITE SELECTION & SECURING

Remove all accessories from the packaging and check that they are complete using the listed scope of delivery.
When using the LED video light, choose a dry location protected from extreme sunlight – ideally indoors.
When using on a tripod, choose a level, solid surface so that the LED video light cannot fall over.
When mounting on/to adaptors, make sure that the LED video light is always securely screwed on.

START-UP

POWER SUPPLY & BATTERY CHARGING
Note: The LED video light has an integrated Li-Ion battery. A suitable mains adaptor and a charging cable are required for charging the battery. Further information can be found in the chapter “Scope of delivery” and “Technical data”!

1. Insert the USB-C plug of the charging cable* into the USB-C port of the LED video light.
2. Insert the USB-A plug of the charging cable into the USB-A connection socket of the USB power adaptor.
3. Insert the mains plug of the power adaptor into the socket. The battery of the LED video light is now charging, the square function light near the USB-C port is now blinking. When the battery is fully charged, the function light is permanently on.
4. If the battery power reaches a critical point, the battery symbol below the controls will light up. Then the LED video light must be re-connected to the mains as soon as possible in order to recharge it.

SWITCH ON/OFF

1. Slide the On/Off switch to the ‘ON’ position to turn the LED video light on.
2. Slide the On/Off switch to the ‘OFF’ position in order to turn off the LED video light.

FUNCTIONS

COLOUR TEMPERATURE
Note: The temperature value is displayed by two digits. Examples: ’32’ corresponds to 3200K, ’56’ corresponds to 5600K.

1. If necessary, press the function button several times until the current temperature is shown on the display.
2. Press the selector switch to the right or left (+/-) to set the desired value for the colour temperature.

BRIGHTNESS (DIMMER)
Note: The brightness is displayed as a percentage (10-99). The higher the light intensity, the more power is being consumed.

1. If necessary, press the function button several times until the current percentage is shown on the display.
2. Press the selector switch to the right or left (+/-) in order to set the desired value for the brightness.

BOOSTER
Note: With the booster function, maximum brightness is achieved immediately.

1. Press the Booster button to directly increase the brightness to 130%.
2. Press the Booster key again to reset the brightness to the previous level.

CHARGING FUNCTION
(only Art. No. F004352)
The model BR-96B (Art. No. F004352) is equipped with a USB-A port.
A low-voltage device (e.g. smartphone) can be supplied with power or charged via this connection socket using a suitable USB connection cable*.

ASSEMBLING

MOUNT DIFFUSER ATTACHMENT
Note: The diffuser attachment provides softer light and mimics both the lightshadow contrast as well as distracting reflections.

1. Place the diffuser attachment on the LED panel of the video light with the side lugs first and press lightly until the attachment is firmly seated on the light.
2. Push the lugs of the diffuser attachment slightly outward and pull the attachment off the light.

MOUNTING LED VIDEO LIGHT ON/TO ACCESSORY PARTS
Note: The LED video light is equipped with a 1/4″ mounting thread that allows mounting on numerous accessories with a corresponding 1/4″ threaded screw (e.g. photo tripod, ball/articulated head, adaptor). The accessories included in the scope of delivery are already equipped with such a threaded screw.

1. Screw the LED video light with the 1/4″ mounting thread onto the 1/4″ threaded screw of the desired accessory.

MOUNTING LED VIDEO LIGHT TO SMARTPHONE ADAPTER
The smartphone adapter can be secured to the bottom of the LED lamp with the 1/4” screw. Together they can then be mounted on the table tripod. When folded, the table tripod becomes a handle (see Fig. 3).

CLEANING & MAINTENANCE

Only clean the outside of the LED video light with a dry cloth to avoid damage to the electronics.
Remove dust and lint in connection sockets and/or gaps with bellows or by means of an air pressure gun.
Carefully wipe off heavier soiling on the LED panel or the diffuser attachment with a slightly moistened soft cloth.

STORAGE

Store the LED video light in the carrying bag provided.
Store them at normal room temperature in a dry and dust-free place.

TROUBLESHOOTING

Why does the battery only has a low capacity?

• Make sure the battery is fully loaded when using the video light.
• To ensure a long battery life, do not operate the LED video light to maximum brightness when it is not needed.
• The 9W version (Art. No. F004352) features a power bank function. Using this function will shorten the battery life.

TECHNICAL DATA

DISPOSAL

Dispose of the packaging materials according to type.
Contact your local waste-disposal ate the LED video light to service or environmental authority for information about the proper disposal.
Do not dispose of electronic devices in the household waste!
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.
  Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return the batteries after use either at our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.
The integrated rechargeable battery may only be removed for disposal! Opening the housing casing can destroy the device.
Discharge the battery completely before disposal. If possible, open the housing casing and remove the battery for separate disposal.

CE DECLARATION OF CONFORMITY

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH.
The full text of the EC declaration of conformity is available at the following Internet address:
www.bresser.de/download/F004352/CE/F004352_CE.pdf
www.bresser.de/download/F004353/CE/F004353_CE.pdf

UKCA DECLARATION OF CONFORMITY

A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address:
www.bresser.de/download/F004352/UKCA/F004352_UKCA.pdf
www.bresser.de/download/F004353/UKCA/F004353_UKCA.pdf

Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain

WARRANTY

The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an extended voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at

www.bresser.de/warranty_terms

Please contact the service centre first for any questions regarding the product or claims, preferably by e-mail.
E-Mail: [email protected]
Telephone: +44 1342 837 098
BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope
Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
Errors and technical changes reserved.
Manual_F004352-F004353_LED-Video-Lights_en-nl-de_BRESSER_v112022a

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | BRESSER Pocket LED 9W Bi-Color Dauerlicht für den mobilen Einsatz und Smartphone-Fotografie | Expand Your Horizon
• Bresser | BRESSER Pocket LED 5W Bi-Color Dauerlicht für den mobilen Einsatz und Smartphone-Fotografie | Expand Your Horizon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>