HOFTRONIC T8 LED Tubes User Manual
- June 9, 2024
- HOFTRONIC
Table of Contents
HOFTRONIC T8 LED Tubes
IMPORTANT SAFETY DETAILS
- Ensure the AC/Mains power is NOT connected and cannot be unexpectedly reconnected during installation.
- This product must be installed by a qualified electrician in accordance with the instructions provided and in compliance with recognized electrical and safety regulations relevant to the country it is being installed.
- This product may NOT be installed by minors or people with a mental disability.
- Not applicable to outdoor use.
- Operation ambient temperature from -20°C to 45°C.
- DO NOT use electronic ballasts.
- It is recommended to power the product directly, without electrical ballasts. If the components are powered through ballasts, we cannot guarantee their long-term durability, therefore the warranty will be void.
- Suitable for a maximum 10-12 hours daily usage. Usage of the product more than 12 hours a day would void the warranty.
INTRODUCTION OF OUR LED TUBE SERIES
-
Nano LED T8 Tube: 110lm/W, 130lm/W
-
Basic LED T8 Tube: 140lm/W
Eco LED T8 Tube: 160lm/W -
Premium LED T8 Tube: 175lm/W
-
Ultra LED T8 Tube: 200lm/W
-
Hero LED T5 Tube: 160lm/W
-
LED T5 Tube: 140lm/W, 175lm/W, 200lm/W
UNIQUE SELLING PROPOSITIONS
Ultra-high lumen efficiency, Super energy saving, no maintenance, easy installation, long lifespan, instant on with no delay, high-efficiency driver, low temperature while working, low brightness decay, Patented design with elegant appearance.
APPLICATIONS
Perfect and ideal replacement for fluorescent tubes, widely used in hotels,
offices, factories, meeting rooms, schools, hospitals, and commercial and
residential buildings.
ADDITIONAL OPTIONS
Flicker-free, super high >CRI80.
WARRANTY
- T8 110 lm/W 3 years
- T8 130 lm/W 3 years
- T8 140 lm/W 5 years
- T8 160 lm/W 5 years
- T8 175 lm/W 5 years
- T8 200 lm/W 10 years
- T5 140 lm/W 5 years
- T5 160 lm/W 5 years
- T5 175 lm/W 5 years
- T5 200 lm/W 10 years
INSTALLATION INSTRUCTIONS
- Turn OFF the electricity before starting
- Follow the diagram below according to your situation.
Standard Installation method
Situation 1: Warning! Do not connect mains to the “internally shorted” end.
Follow situation 1.
Retrofit Magnetic Ballast Installation method Situation 2: Magnetic ballast
retrofit: remove the starter and replace it with a LED starter. Follow
situation 2.
ONLY FOR TUBES WITH POWER SWITCH
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. The product has a
protective contact/terminal. Failure to connect the protective lead may lead
to electric shock. Mounting diagram: see pictures. Check for proper mechanical
fastening and connection to electrical power prior to first use. The product
can be connected to a supply network that meets energy quality standards as
prescribed by law. To maintain the proper IP protection level, the right
diameter of the power cable should be selected for the cable gland used in the
product.
FUNCTIONAL CHARACTERISTICS
The product can only be used indoors.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and
the product has cooled down. Clean only with soft and dry clothes. Do not use
chemical detergents. Do not cover the product. Ensure free air access. The
product may heat up to a higher temperature. The product can only be supplied
by rated voltage or voltage within the range provided. It’s forbidden to use
the product with a damaged protective cover. The product must not be used in
unfavorable conditions, e.g. dust, water, moisture, vibrations, explosive air
atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not
suitable for independent repairs.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended. This labeling indicates the requirement to selectively collect
waste electronic and electrical equipment. Products labeled in this way must
not be disposed of in the same way as other waste under the threat of a fine.
These products may be harmful to the natural environment and health and
require a special form of recycling/neutralizing. Products labeled in this way
should be returned to a collection facility for waste electrical and
electronic goods. Information on collection centers is provided by local
authorities or sellers of such goods. Used items can also be returned to the
seller when a new product is purchased, in quantity no larger than the
purchased item of the same type. The above rules regard the EU area. In the
case of other countries, regulations in force in a given country must be
applied. Contacting the distributor of our products in a given area is
recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury, and other material and non-material damage.
For more information about Hoftronic products visit
www.hoftronic.com. Softonic shall not be
responsible for any damage resulting from the failure to follow these
instructions. Softonic reserves the right to make changes in the manual – the
current version can be downloaded at
www.hoftronic.com.
DECLARATION OF CONFORMITY
DOCUMENTATION
This product has been manufactured and supplied in compliance with all
relevant regulations and directives applicable to all member states of the
European Union. The product complies with all applicable regulations and rules
in the country of sale. Formal documentation such as the declaration of
conformity, the safety data sheet, and the product test report is available
upon request.
CE DECLARATION
The product complies with the following directives:
- LVD: 2014/35/EU
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
- TUV, SAA, LM80
The complete Declaration of Conformity Document (DOC) is available upon
request. Imported by
HOF Trading B.V. Fahrenheitstraat 11, 6003 DC Weert , The Netherlands Made in
P.R.C. www.hoftronic.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>