SANWA 400-MABTTB41 Bluetooth Trackball Mouse User Manual

Bluetooth Trackball
Mouse Manual, 100 MABTTBEI
GMABTTBA
Bluetooth Mouse FCC ID: 2AMSUBTT41

 Opening

Thank you for purchasing this Bluetooth Trackball Mouse.

Caution

• The company is not liable for any damages, such as live motion defects, data loss, etc., caused by using this product or software.
• This product is not guaranteed to be compatible all device.
• This product is intended for use in general workplaces and homes. The company does not assume responsibility in the event of damages caused by using in any other places.
• Refrain from using in environments where medical instruments and systems directly or indirectly related to human life are required, and where a high level of safety and responsibility is required.
• Refrain from using directly or indirectly with equipment and computer systems in which a high level of safety and responsibility are required.
• Do not use this product on airplanes as it may interfere with the airplane communication system.
• Please consult your doctor before using this product if you use a pacemaker or other medical device.

Warnings Regarding Health

Operating the mouse, trackball, and keyboard for long periods of time can lead to pain or numbness in hands, arms, neck, shoulders, etc. Serious damage may be incurred if such use is repeated. If you feel pain or numbness while operating the mouse or keyboard, stop using it immediately and consult a doctor if necessary. Take regular breaks from daily computer work to avoid strain on hands, arms, neck, shoulders, etc.

Specifications

Communication
R a n g e| Wooden desk (nonmagnetic material) / approx. radius 10m, Steel desk (magnetic material) /approx. radius 2m
Resolution| 600.800.1200-1600 DPI
Reading method| Optical sensor system
Buttons| 2 buttons, pairing button, wheel button (scroll), count switch button
Size/Weight| W107.9 X D155.1 X H6.1mm; approx.145g

Compatible Models

Models that support Bluetooth5.1 HID Windows (DOS/V) PC•tablet, Apple Mac series, Chrome OS PC, Android smartphon•tablet, iPad series

Compatible OS

Windows 11.10.8.1.8.7 macOS 12.11,10.12-10.15 Chrome OS, Android 7-11, iPadOS 13-14, OS 13-147.

Name of Parts

1. Left button / Right button

2. Wheel button (scroll button)

3. Count switch button

4. Trackball

5. LED
   Check count status: blinks 1 time: 600count/inch blinks 2 times: 800count/inch blinks 3 times: 1200count/inch blinks 4 times: 1600count/inch

6. Pairing button

7. Connection switch button

8. Pairing / Connection LED

9. Power switch

10. Trackball removal hole

11. Battery storage slot

12. Battery cover

NOTE: This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and <an radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no Quarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications nat expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  {1} this device may not cause harmful interference, and (2)  this device must accept any interference received, including  interference that may cause undesired operation.

How to Insert Batteries

Open the battery cover and insert the AAA batteries into the battery storage slot. Before using it for the first time, please make sure there is battery power remaining.LED blinks red when low battery.
Be careful of polarity when inserting the battery.
Replace the battery when the movement of the mouse cursor becomes rough or when the LED sensor does not turn on.
Turn off the mouse when replacing the battery.
When replacing the batteries, please use new AAA batteries.
Leaving the expired battery in the mouse may result in leakage so be sure to remove the battery when expired.

Connection with Mouse

• Pairing method for the first time
  1. Switch on the mouse, press and hold the pairing button until the LED of the corresponding device at the bottom flashes.
  2. Enter the pairing mode.
  3. When the following model name is displayed on the device side, the pairing has been successfully completed with operation method on the device side.
  Device name: “SANWA Luna”

• After Pairing Operation is complete When the power switch on the mouse is turned “on”, it will be connected to the device automatically.

Switch Devices

This product can be paired (connected) to two devices.
<How to pair the second device

1. Press the connection switch button. The pairing / connection LED will switch.
2. Press and hold the pairing button in the same way as the first pairing method.
3. Pair the device with ‘SANWA Luna” using the operation method on the device.
4. After the pairing is complete, press the connection switch button to switch between the two devices.

Setting Deceleration Mode

You can slow down the cursor speed by setting it to the deceleration mode. How to set: Press and hold the count switch button and the right button simultaneously for at least 3 seconds. The LED will blink and enter the deceleration mode. How to cancel: Press and hold the count switch button and the left button simultaneously for at least 3 seconds. The LED will blink and the deceleration mode will be canceled.

Customize Buttons (Windows only)

Once you download the driver software from the website, you can use the button programming function.
To use custom keystrokes, you need to keep the software enabled.

1. https://www.sanwa.com/download/tbx.exe” Please access. The download will start as soon as you access it.
2. Save and open the file.
3. Please follow the installation wizard to install the driver. In the process of installation or use of any problem, please contact us.
4. Confirm the agreement on the software specification license, click ‘Yes’ and start the download.
5. Follow the instructions and click “Next” and “Install”.
6. The driver is installed. Click ‘Finish’.

Troubleshooting

Q.Track ball (mouse cursor) doesn’t move.
A.
1. Check to make sure the pairing has been severed. (see Step 9)
2. Make sure that the batteries have been correctly inserted. Make sure that the track ball’s power has not been switched to OFF.
3. The battery level may be low; try replacing the battery.
Q.If the track ball is not moved for some time, it takes a few moments to start up. The track ball (mouse cursor) doesn’t move.
A.If the product is not moved for some time, it enters sleep mode to conserve the battery. Pressing the button on the mouse will restore movement but it will take a few seconds.
Q.The cursor or scroll movement is not smooth.
A.When the track ball does not move smoothly, try cleaning it For more information, please access here. https://www.sanwa.comVdownload/btga.pdf

Warranty

Term 1 year

Inquiries

EN : support-en@sanwa.com

https://www.sanwa.co.jp/support/setsumeisyo/pdf/direct/400-MABTTB41_ver1-0.pdf

|
---|---
https://m.facebook.com/pg/sanwago/services/?ref=page_internal| https://m.youtube.com/channel/UC0gORTX7KLqGwcHhPYvR7Xg/featured?view_as=subscriber

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>