Webasto Setup App User Guide

June 9, 2024
Webasto

Webasto Setup App

Instructions for the Webasto Setup App and manual

  1. Download and open the Webasto Setup App (QR-code on the other side)

  2. Take this manual and look up the code page. Scan the big QR-code

  3. Follow the instructions from the Webasto Setup App and reboot the charger
    (remember to select and fill in information about the internet connection otherwise the charger won’t connect to Monta app)

  4. Instruct the wallbox owner to download Monta app and use the charger.
    (provide serial no. for the owner – it is needed to connect wallbox and Monta app together)

If you are a certified Webasto installer please visit dealers.webasto.com for more information.
If you want to become a cerfied Webasto installer please visit charging.webasto.com and contact our sales & customer office in your country.

IMPORTANT INSTALLER INFORMATION

As an installer of this wallbox you need to setup the wallbox with the following information:

  1. How many Amp are the wallbox connected to?
  2. Disable free charging (so only access is via the Monta app)
  3. Decide how to Connect the charger to the internet (wifi or Cable – if wifi is chosen, you need to add password and name of the wifi access point)
  4. The router must be set up to communicate with the wallbox

All these 3 things are done in the Webasto Setup App
Download the Webasto Setup App via the QR code and follow the setup guide in the wallbox manual.
(Guide on the other side)

charging.webasto.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals