Chicago Pneumatic FR12BSP Air Filter User Manual
- June 9, 2024
- Chicago Pneumatic
Table of Contents
Chicago Pneumatic FR12BSP Air Filter
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool MUST read and understand
these instructions before performing any such task.
DO NOT DISCARD – GIVE TO USER
Technical Data
| Pressure | Value | Unit |
|---|---|---|
| (1) Inlet Pressure (Max.) | 16 | bar |
| (2) Outlet Pressure (Max.) | 10 | bar |
| Operating Condition | Value | Unit |
| Temperature | -10 to +50 | |
| +40 to +122 |
°C
°F
Declarations
Regional Requirements
WARNING
This product can expose you to chemicals including lead, which is known to the
State of California to cause cancer and birth defects or other reproductive
harm. For more information go to https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD – GIVE TO USER
WARNING
Read all safety warnings, instructions, il-lustrations and specifications
provided with this product.
Failure to follow all instructions listed below may result in electric shock,
fire, property damage and/or serious injury.
Save all warnings and instructions for future reference.
WARNING All locally legislated safety rules regarding installation, operation and maintenance shall be respected at all times.
Statement of Use
- For professional use only.
- This product and its accessories must not be modified in any way.
- Do not use this product if it has been damaged.
- If the product data or hazard warning signs on the prod-uct cease to be legible or become detached, replace with-out delay.
- The product must only be installed, operated and ser-viced by qualified personnel in an industrial environ-ment.
Intended Use
This product is intended to be used as an air filter / regulator / lubricator (in combination or separate, as indicated in the manual). No other use is permitted. For professional use only.
Product Specific Instructions
General Installation Safety
- Air lines must be cleaned before connected to the unit. Dirt particles can cause serious malfunctions.
- Whipping hoses can cause severe injury. A shut-off valve must be sited immediately upstream of the hose reel and be easily accessible.
- If liquid, paste or fibrous materials are used for sealing the connections, these must be carefully prevented from getting into the unit. These materials can cause serious malfunctions.
WARNING Risk of Injury
Wrong installation and flow direction are potentially hazardous.
- Install filters, regulators, and lubricators in vertical position only.
- Adhere to the flow direction marked on each mod-ule.
General Operation Safety
WARNING Risk of Injury
The system is operating under pressure. Incorrect instal-lation could damage the unit and cause serious injury.
- Before start-up, check that all connections, ports, and modules have been correctly installed.
WARNING Risk of Injury
If no filling unit is used, the system will suddenly be un-der pressure during
start-up, causing dangerous and sud-den cylinder movements.
- When starting up a system without a filling unit, make sure that the cylinders are in their end posi-tion. For cylinders not in end position, make sure they do not present any danger.
WARNING Risk of Injury
Harmful oil mists are produced in the compressed air systems.
- Lubricators must be operated in closed pneumatic systems only.
- Shut off air supply, drain hose of air pressure and dis-connect hose reel from air supply when not in use.
General Maintenance and Service Safety
- In the event of malfunction, please contact the customer service responsible.
- Release pressure before disconnecting the hose.
- Daily check for damaged or loose hoses and fittings and rectify immediately. Damaged hoses or fittings must be replaced.
- Protect the hose from contact with sharp edges, flames, hot parts and solvents.
- Dispose of used filter elements in compliance with na-tional regulations.
WARNING Risk of Injury
Opening the system when under pressure could damage the unit and cause serious
injury.
- Ensure that the system is pressure free before open-ing the filter reservoir.
WARNING Risk of Injury
Opening the system under pressure can damage the maintenance unit and cause
serious injury.
- Make sure the system is no longer under pressure before opening the oil reservoir.
Safety instructions
- Shut off air supply and depressurize system before in-stalling unit.
- Only operate within the stated ranges of safe operating temperatures and pressures. Before installation, compare the technical data with the actual operating conditions.
- The pneumatic system in which the unit is used must comply with ISO 4414, “Pneumatic fluid power – Gen-eral rules and safety requirements for systems and their components.”
- Ensure the unit is correctly installed for the direction of air flow as indicated by the arrow symbol on the unit.
- Contact with solvents and other chemicals can cause chemical attack and subsequent burst.
- The unit must not come into contact with acetone, ben-zol, brake fluid, glycerine, some synthetic oil, chloro-form, carbon tetrachloride (and similar solvents), carbon disulphide, methyl alcohol, perchloroethylene, toluene, trichloroethylene, xylene (nitrocellulose, thinner), acetic acid.
- The bowl and other plastic parts must only be cleaned with warm water and normal washing-up liquid.
- This unit must not be modified.
Useful Information
Website
Information concerning our Products, Accessories, Spare Parts and Published
Matters can be found on the Chicago Pneumatic website.
Please visit: www.cp.com.
Country of Origin
Germany
Copyright
© Copyright 2022, CHICAGO PNEUMATIC Tool Co.LLC, 1815 Clubhouse Road, Rock
Hill, SC 29730 – USA
All rights reserved. Any unauthorized use or copying of the contents or part
thereof is prohibited. This applies in particular to trademarks, model
denominations, part numbers and drawings. Use only authorized parts. Any
damage or mal-function caused by the use of unauthorized parts is not covered
by Warranty or Product Liability.
ABOUT CHICAGO PNEUMATIC
Since 1901 the Chicago Pneumatic (CP) name has represented reliability and
attention to customer needs, with construction, maintenance and production
tools and compressors designed for specific industrial applications. Today, CP
has a global reach, with local distributors around the world. Our people start
every single day with a passion to research, develop, manufacture and deliver
new products that are meant to meet your needs not only today, but tomorrow as
well.
TO LEARN MORE, VISIT WWW.CP.COM
To find more information about your tool, scan the QR code or go to m.cp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>