PYLE PLMR24W 3.5 Inch 200 Watt 3 Way Weather Proof Mini Box Speaker System User Guide
- June 24, 2024
- Pyle
Table of Contents
PYLE PLMR24W 3.5 Inch 200 Watt 3 Way Weather Proof Mini Box Speaker
System
Specifications:
- Power Output: 200 Watts
- Speaker Type: 3-Way Mini Box Speaker System
- Weatherproof
Product Usage Instructions
Terminals:
The speaker system comes with terminals for easy connectivity to your audio source.
Installation:
Mounting the Bracket:
- Remove the bracket knobs and the bracket from the speaker.
- Hold the bracket up to the mounting surface, ensuring it aligns properly.
- Mark the locations of the screw holes on the mounting surface and drill pilot holes.
- Pull the speaker wire through the wire hole in the center of the bracket and attach it to the mounting surface using hardware.
Final Adjustments:
- Ensure the speaker is in phase and working correctly before adjusting its angle for optimal sound.
- Hand-tighten the bracket knobs to avoid damaging the threads.
- Verify that the installation is safe and secure.
Connecting Your Speakers:$
Connect the speakers to your audio source following the provided terminals for a seamless audio experience.
California Prop 65 Warning:
This product contains chemicals known to the state of California to cause cancer, birth defects, and other reproductive harm. Avoid ingestion and refer to www.P65warnings.ca.gov for more information.
FAQ
Q: Can I mount the speakers horizontally and vertically?
A: Yes, the speakers can be mounted both horizontally and vertically based on your preference.
Q: How should I adjust the angle of the speaker for the best sound?
A: After ensuring the speaker is in phase and functioning correctly, adjust its angle manually for optimal sound quality.
Q: What should I do if I encounter issues with my installation?
A: If you face any problems during installation, please contact our customer support at 1.718.535.1800 or visit PyleUSA.com/ContactUs for assistance.
Visit Our Website
Features
- Excellent for Use On Boats/Marine/
- Decks/patios/Poolside/Outdoors
- Completely Weather Proof
- 3.5” Aluminum Injection Cone Woofer
- 24 Oz. Magnet Structure
- 1.75” Wide Dispersion Cone Midrange
- 1” Super Dome Tweeter
- Capacitor Crossover Network
- Bass Reflex Vent for Added Bass Response
- Heavy Duty ABS Construction
- Quick Connect/Disconnect Speaker Terminals
- Removable Rustproof Mesh Grills
- Power: 100Watts RMS/200Watts Peak
- Frequency Response: 70-21K Hz
- Impedance: 4 Ohms
- Complete Mounting Kit ＆Wires
- Dimensions: 5.25”(W)x3.75”(H)x3.75”(D)
Installation
MOUNTING THE BRACKET
-
Remove the bracket knobs and the bracket from the speaker.
-
Hold the bracket up to the mounting surface. “PYLE” can be mounted either horizontally or vertically. Hold the bracket so that the speaker wire fits through the large, circular wire hole in the bracket. Align the bracket to be square with the surrounding. (Use a level for accuracy)
-
Mark the locations of the three shaped screw holes.
Use all of the holes. -
Drill pilot holes into the mounting surface.
-
Gently pull the speaker wire through the wire hole in the center of the mounting bracket.
Align the bracket so that the holes all line up. -
Use your hardware to attach the bracket to the mounting surface.
MOUNTING
FINAL ADJUSTMENTS
- After checking that the speaker is in phase and works correctly, angle the speaker for the best sound.
- Hand-tighten the bracket knobs only. Power tools may over-tighten the knob and strip the threads of the insert.
- Check that the entire installation is safe and secure.
Connecting Your Speakers
Connecting the speakers to your amplifier or receiver.
- First, turn your amplifier off to avoid damage which may result from accidental shorting of the speaker leads.
- Correct phase polarity is critical for proper stereo imaging and bass performance. The red (+) terminal on your amplifier or receiver must be connected to the red (+) terminal on your speaker; the same applies t o the black (-) terminal.
- Connect one loudspeaker at a time to ensure proper connection of left and right channels. Make sure all wires are firmly fast ened.
- If you notice a high level of bass or central image focus, double-check your connections for proper polarity.
California Prop 65 Warning
WARNING:
This product can expose you to chemicals, which is known to the state of
California to cause cancer birth defects and other reproductive harm. Do not
ingest.
For more info go to: www.P65warnings.ca.gov
Questions or Comments?We are here to help!Phone: 1.718.535.1800
PyleUSA.com/ContactUs
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>