enelion LUMINA Electric Vehicle User Guide
- June 9, 2024
- enelion
Table of Contents
enelion LUMINA Electric Vehicle
Dear User
Congratulations on your purchase of the Enelion charger and thank you for your
trust.
Please read this manual carefully before using the charger for the first time.
Up-to-date manuals for users always available at:
enelion.com/en/help
Copyright, Enelion Sp. z o. o.
The manual may change as the product develops.
The information provided may not be correct. All rights reserved.
Revision: V 1
Number of pages: 16
Released: May 10, 2022
Important information
Please read this manual before attempting to commission the charger.
Safety instructions
- Never use or touch the device if it is damaged or not functioning properly.
- Always perform recommended maintenance, installation and any repair work by an authorised service centre and in accordance with local requirements.
- In case of fire occurs, do not extinguish with water.
- Never clean the station with high pressure or running water.
- Do not immerse the station in water or other liquids.
- If the light bar lights up red, it indicates an error. Please refer to the User Manual for troubleshooting.
- Never touch the electrical contacts of the type 2 socket/plug and never insert foreign objects into it.
- Never use the charging cable if it is damaged or if the connector is wet or dirty.
- Charging-cable should only be disconnected from the station by pulling on the connector’s handle. Do not pull directly by the cord.
- Make sure the charging cable is not posing a threat of a person tripping or car running over
- Even though the station is designed to withstand normal weather conditions, it is recommended to protect it from direct sunlight or exposure to extreme weather conditions.
- Do not use the station near strong electromagnetic fields or in the immediate vicinity of radio transmitters.
Quick start **
**
Use the cable to connect your car to the charger.
With default settings used, charging starts immediately.
If you want to use RFID tag to authorize, please follow these steps
Connect to charger’s hotspot using a network ID featuring “Enelion”
Enter the password from the sticker on the head
Connect to configuration panel by typing “192.168.8.8” into the browser’s address bar
Log in to configuration panel. Default credentials are admin/admin
Put the RFID card against the top lid of the charger
Go to the Charger -> Authorization section and find your card in RFID Cards’ History section
Use “+” to add a card to an Offline Authirized Cards’ group
Disable Freecharge mode
Mobile App
Access to the configuration panel
To remotely use functions such as charge scheduling, start / stop, remote
power-plug relay and others, install the dedicated mobile Enelion Lumina App
on your smartphone.
Customer service
Download the latest user manuals, useful documents and video tutorials of your
product for your product on enelion.com
enelion.com/en/help
In addition to the steps described on the previous pages, we recommend
watching the installation videos.
THIS DOCUMENT CONTAINS INFORMATION THAT MAY BE SUBJECT TO CHANGE WITHOUT
NOTICE.
© 2022 ENELION
50 Pana Tadeusza St , 80-123 Gdańsk, Poland
Copyright, Enelion Sp. z o. o.
The manual may change as the product develops.
The information provided may not be correct. All rights reserved.
Revision: V 1
Number of pages: 16
Released: May 10, 2022
ENELION sp. z o.o. | 50 Pana Tadeusza St 80–123 | Gdańsk | Poland
support@enelion.com
enelion.com
References
- Enelion - Leading EV Charging Manufacturer: Innovative Solutions
- Enelion - Leading EV Charging Manufacturer: Innovative Solutions