enelion LUMINA Smart EV Charging Owner’s Manual
- June 9, 2024
- enelion
Table of Contents
enelion LUMINA Smart EV Charging
Minimalist style appreciated at international competitions design, modular design allowing for easy adjustment to different requirements. 15-minute installation process and control via mobile application are the most important, but not the only advantages of ENELION LUMINA chargers.
Feature
- Minimalistic design
- 15-minute installation process
- User control via the mobile application
- Dynamic Load Balancing
- Various housing color and material variants
- User friendly
MINIMALISTIC FORM RECOGNIZED BY WORLD-RENOWNED DESIGN AWARDS’ JURY PANELS
Aesthetics and durability are paramount to us. For that reason, along with
solid anodized aluminum housings, we decided to use polycarbonate composite-
hardened synthetic material, highly resistant to scratches.
MODULAR STRUCTURE
Modular build provides a perfect solution facilitating a single base-piece and
interchangeable charging heads.
READY TO WORK IN 15 MINUTES
Your EV charger will be ready to perform online within 15 minutes of unboxing.
That’s how short it takes to install the ENELION LUMINA.
MOBILE APP
Charging session scheduling and monitoring, power output adjustment,
authorization settings, remote power-plug relay with delayed-start option.
ADVANCED TECHNICAL SOLUTIONS
Intelligent charging-power limitation system that enables splitting the power
dynamically between units in a chain, so the total charging power does not
exceed overall output from the grid.
OFF-THE-WALL MOUNTING OPTIONS
A distinctive concaved backplate design makes it possible to install the
ENELION LUMINA on diverse sites. Aside from all flat surfaces, one can mount it
on lampposts, columns, signposts, and various types of poles. This attribute
enables easy installation by making use of street furniture and avoiding
costly landscape rearrangements.
Modular structure
Structure, features, advantages
Mobile App Management
Install the Enelion Lumina App on your mobile and enjoy remote control and
management over charging sessions’ scheduling, power output adjustment,
authorization settings, and power-plug relay with delayed-start option.
Secure limited access
Grant users access to your charging station with authorized RFID cards or
back-end system settings. Lock or unlock the charger remotely to allow or
block charging.
Convenient billing system
ENELION LUMINA has a built-in three-phase energy meter that enables billing
individual loading sessions with over 99% accuracy. Pre-installed MID-certified
meter is also available to be integrated within the unit.
Embedded PLC communication ISO 15118 compliance
To be implemented: bilateral vehicle communication, and connectivity with
Energy Management Systems.
Robust structure
High-quality components along with a well-thought design, IP54 ingress
protection rate, and a high, 10th degree of impact protection (IK10) make
ENELION LUMINA the perfect solution for public use.
Dynamic Load Balancing
Intelligent charging power limitation system that enables splitting the power
dynamically between units in a chain, so the total charging power does not
exceed overall output from the grid.
Technical specification
- Housing Polycarbonate, anodized aluminum*
- Ingress protection rate IP54
- Impact protection IK10
- Flammability class UL94-V0
- Charging connector type
- ENELION LUMINA Socket – Type 2 socket
- ENELION LUMINA Cable – Type 2 connector with 5.2 m cord
- Residual current protection Embedded residual current monitor – Enelion RCMB 6 mA DC
- Energy metering Integrated 3-phase energy meter > 99% accuracy
- Certified electricity meter (MID) Impulse* – possible to install inside the housing
- User interface
- multi-color LED strip that indicates the status of the device
- a dedicated app connecting station via WiFi AP 2.4 GHz b/g/n
- Online communication unit
- integrated LTE/4G modem
- Wi-Fi 2.4 GHz b/g/n – direct access point to the station with an option to hide the AP and connect the station to local Wi-Fi network
- Minimal signal quality requirements
- Wi-FI: -60 dBm
- GSM: -85 dBm
- OCPP compliance with OCPP 1.6 J protocol
- Authorization
- built-in RFID/NFC reader – Mifare Classic/ ree Charge
- dedicated app connected via WiFi AP 2.4 GHz b/g/n
- Current/Charging power
- up to 7.4 kW at 32 A 1-phase
- up to 22 kW at 32 A 3-phase (TN system)
- Charging voltage 3 x 400 V AC/230 V AC (±10%)
- Supply voltage
- 3 x 400 V AC/230 V AC (±10%) (TN/IT)
- possibility of connecting the cable from the top, bottom, and back of the station
- Other features
- configuration with no additional tools
- remotely controlled schuko outlet (max. 2000 W/10 A)*
- remote start/stop, delay, and charging schedule
- temperature and humidity monitoring inside the device
- Operating temperature From -30°C to +55°C
- Maximum altitude for installation 2000 m
- Height 390 mm
- Depth 133 mm
- Width 155 mm
- Weight 3 kg / 4.2 kg (depending on device version)
- Compliance
- 2014/53/EU (RED); 2011/65/EU (RoHS); 2014/30/EU (EMC); 2014/35/EU (LVD); UK SI 2016 No. 1101; UK SI 2016 No. 1091; UK SI 2017 No. 1206; UK SI 2012 No. 3032
- The following BSI and ETSI technical standards and specifications have been applied:
- ETSI EN 300 328 V2.2.2:2020-03; EN 62196-2:2017-06; EN IEC 61851-1:2019-10; EN IEC 61851-21-2:2021-09; EN 62196- 1:2015-05; ETSI EN 301 511 V12.5.1:2017-10; ETSI EN 300 330 V2.1.1:2017-08; ETSI EN 301 489-1 V2.2.3:2020-07; ETSI EN 301 489-17 V3.2.4:2021-05.
Contact Information
ENELION sp. z o.o. 50 Pana Tadeusza St 80–123 Gdansk Poland.
sales@enelion.com.
www.enelion.com.