Abolos LWSFFL0102-LI Free Flow 11-Pack Lividity-Glossy and Matte 12-in x 12-in Multi-Finish Glass Brick Floor and Wall Tile Instruction Manual
- June 9, 2024
- ABOLOS
Table of Contents
LWSFFL0102-LI Free Flow 11-Pack Lividity-Glossy and Matte 12-in x 12-in
Multi-Finish Glass Brick Floor and Wall Tile
Instruction Manual
Installation Use and Care Manual
To ensure a successful installation and proper adhesion, ABOLOS has comp led
the following installation and setting material instructions. ABOLOS will not
provide any guarantee implied or written for any product not installed in
accordance with this information. This is a general installation guide and may
not represent the specific installation guide of the product you purchased.
for more details, please refer to the product specific installation
guidelines.
Due to the handmade nature of ABOLOS glass tiles. variations In the shape.
color. shade and tone should be expected. Please inspect each box prior to
installation to verily lot consistency to assure acceptable shade variations.
IMPORTANT! READ before INSTALLATION!
Do not use any setting compounds such as mastics or epoxies that contah
petroleum distillates. Do not dilute admixtures with water.
ABOLOS glass tees can be installed on interior or exterior wall surfaces in
wet or dry locations. ABOLOS glass t les cannot be installed over flexble
surfaces. They are not recommended for floor applications (unless indicated
for floor use) and should not be exposed to extreme abrasion, thermal shock or
extreme impact.
Although ABOLOS glass MOS are designed to withstand a variety of potential
hazards, carefully place your tiles before setting to avoid surface scratches
or scrap ng the back of the tile with tools.
Proper installation and use of materials is required to avoid stress on the
glass.
Proper installation requires that the substrate be dried and cured. and the
walls be property rendered. Most concrete cures in a:proximately 28 days.
depend ng on atmospheric conditions and mix design.
Be sure to follow he recommended cure times as indcated by the Tile Council of
America handbocic for the installation.
INSTALLATION REQUIREMENTS’
All note/biz; should be used inamen:lancewith manufactures’ directions.
THINSETIMORTAR”
INSTASET Instant Adhesive Mastic (WHSPSA-ROLL), a commercial grade heavy duty
thinset membrane may be used to adhere any tile/mosaic to the substrate. This
method allows for immediate grout applicaton, eliminates prodems with thinset
shrinkage, and acts as a tile crack isolation membrane. This installation
method S also rated for shower wall installations.
High performance, high polymer based non-sag thinset mortar glue applied –
with a trowel 114 in. x 3/16 in. V-Notch Trowel can also be used. Respect the
deadline before grouting according to the mortar/ glue chosen Please bllow the
mortar manufacturers guideline for actual recommended usage and applications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>