ANSMANN M900P Bright 930 Lumen 10W LED Torch User Manual
- June 9, 2024
- ANSMANN
Table of Contents
ANSMANN M900P Bright 930 Lumen 10W LED Torch
OPERATING INSTRUCTIONS
Many thanks for choosing a product from ANSMANN. With the following
instructions we would like to help you to get the best from the functions of
your new light.
Your ANSMANN Team
CHANGING THE BATTERIES
Make sure to switch the lamp off before changing the batteries. Remove the old
batteries. Always change all of the batteries at the same time. Insert the new
batteries as indicated by the markings on the battery holder.
NOTE! Take care to observe the polarity markings (+/-) in the battery
compartment. Otherwise, there may be a risk that the batteries could become
damaged and explode. Ensure that you do not short-circuit the contacts. Keep
the contacts away from any metal or damp objects when changing the batteries.
Then close the battery compartment again.
Never attempt to recharge non-rechargeable batteries. Never use new batteries
and used batteries together. Use only high-quality batteries of the same type.
Always change all of the batteries at the same time. The use of rechargeable
batteries and high-current batteries is not permitted due to other electrical
characteristics. In the event that this light will not be used for an extended
period of time, ensure that the batteries are removed to avoid damage. Empty
batteries must be removed.
ENVIRONMENTAL INFORMATION
The device should not be discarded in normal household waste under any circumstances. Dispose of the device via an authorized disposal centre or your communal waste disposal facility. Observe the current applicable regulations. Contact your waste disposal facility in the event of any doubt. Dispose of all packaging materials via an environmentally friendly disposal facility. Used batteries and rechargeable batteries are special waste and must be disposed of in accordance with national regulations.
SAFETY INSTRUCTIONS
Avoid eye injuries – Never look directly into the beam of light or shine it
into other people‘s faces. If this occurs for too long, the blue light portion
of the beam can cause retinal damage. If the light beam shines into the eyes,
close the eyes and turn the head away from the light beam. Keep the product
and the packaging away from children. This product is not a toy. Clean the
device only with a dry cloth.
This lamp exceeds the conditions for risk-free use. The risk when using it
depends on how the user handles the lamp.
RISK GROUP 3 NOTE: Hazardous optical radiation may be omitted by this product. When operating, do not look into the lamp for an extended period of time. Can be hazardous to the eyes.
Exposure Hazard Value (EHV)(1): 702
Risk group Hazard Distance (HD)(2)
3| 0m – 0,265m
2| 0,265m – 5,30m
1| 0,53m – 53,0m
Free group| > 53,0m
- This value indicates the factor by which the risk group limit value to the next lowest group has been exceeded. The limit value is 1.
- Distance from eyes to the lamp at which the respective risk group is applicable.
LIMITATION OF LIABILITY
The information contained within these operating instructions can be changed without prior notification. ANSMANN accepts no liability for direct, indirect, inci-dental or other damage or consequential damage arising through improper handling or through disregard of the information contained within these operating instructions.
GUARANTEE
The device has a 3-year guarantee. The guarantee does not apply to damage to
the device arising from a failure to comply with the operating instructions.
Subject to technical changes. We assume no liability for printing errors.
12/2016
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>