unno SP9435BK Sound Blast Fire TWS Party Speaker User Manual

June 6, 2024
unno

Sound Blast Fire
TWS Party Speaker

User Manual
Manual de Usuario

IMPORTANT SAFETY RECOMMENDATIONS

  1. Please read this manual carefully before using the product for the very first time; failing to do so may result in a personal injury and/or permanent damage to the unit.
  2. This product is recommended for indoor use. Please avoid any exposure to liquids, rain, or moist environments.
  3. Do not place the unit near any heat sources that can overheat the unit, such as a stove, heat radiators, or direct sun.
  4. Do not modify the plug’s prongs. Please connect the unit to a matching outlet (polarized or grounding). If the provided plug doesn’t match your outlet, please ask for professional assistance.
  5. When connecting the unit to the power outlet, please avoid applying any undesirable tension to the electric cord. Also, please avoid running the cord where it can be accidentally tripped over.
  6. To prevent an electric shock or permanent damage of the unit, do not attempt to connect any accessory different than the ones included or recommended.
  7. To prevent an electric hazard and void your warranty, do not attempt to open or modify the unit. If you require to perform any kind of service to the unit, please refer to a professional service.
  8. When the unit is not in use or during periods of unstable electric supply, we recommend you unplug it until you decide to resume its use, or when the electric supply is back to normal.

IMPORTANTES RECOMENDACIONES DE SEGURIDAD

CONTROL PANEL

1. USB port
2. Micro SD card slot
3. Auxiliary-in (3.5mm)
4. Microphone input
5. Charging indicator
6. Power adapter input
7. Power switch
8. Play previous track or stored radio station
9. Play/pause the current track. Radio stations scan and store| 10. Play next track or stored radio station
11. Playback mode (Bluetooth©, Line-in, USB, SD card & FM radio)
12. Volume control
13. Menu
14. Cell phone/tablet slot
15. LED light switch and patterns mode
16. Recording
17. Repeat track
---|---

REMOTE CONTROL

*Requires 2 AAA batteries to operate (not included)

1. Power on/standby mode
2. Playback mode selector(Bluetooth© , Line-in, USB, SD card & FM radio)
3. Voice recording playback
4. Volume up
5. Play next track or stored radio station
6. Volume down| 7. Preset equalizer
8. Numeric keys
9. Repeat the last track or a whole playlist
10. Play previous track or stored radio station
11. Play/pause current playback. FM radio stations scan and store
12. Voice recording
---|---

GENERAL OPERATION

  1. Fully charge the speaker before its very first use. Connect the speaker to the power line using the power adapter included. To fully charge the speaker, you will need about 5 hours. When the speaker reaches its full charge the “CHARGING INDICATOR” will turn green.
  2. Use the “POWER SWITCH” to turn on/off the speaker.
  3. To select from the different input sources, press “MODE” until you reach the desired source.
  4. Turn on/off the party light by long-pressing the “LIGHT” button and briefly pressing it to switch among all available light patterns.
  5. To turn the volume up or down, turn right or left the “VOLUME” knob.
  6. To adjust bass or treble levels, press “MENU” and then turn the “ VOLUME” knob left or right to decrease or increase the intensity.
  7. Most of the functions and settings can alternatively be done by using your remote control.

BLUETOOTH© & TWS MODE

  1. Your speaker is capable of wirelessly connecting to a second identical speaker using TWS technology (True Wireless Stereo). If you wish to connect 2 speakers, turn both of them on and then switch to Bluetooth© mode by pressing the “MODE” button. Once both speakers are in Bluetooth© mode, long-press the “NEXT” button until you hear a confirmation tone, indicating that the connection between the 2 speakers was successful.
  2. If you don’t have a sister speaker, switch to Bluetooth© mode and skip to the next step.
  3. To connect your phone to the speaker(s), activate the Bluetooth© on your phone and look for the “SP9435” device. Once the connection is established, you will hear a  confirmation tone. If 2 speakers were connected under the TWS mode, you will only be able to see one of them, when you search for nearby Bluetooth© devices. You can now play music from your phone.
  4. You can control the playback from the unit or your phone. Press “PLAY/PAUSE” to play or pause the playback, “PREVIOUS” to move to the previous track, or “NEXT” to move to the next track.
  5. If your speakers are connected through TWS and you want to play music from a single one, turn off the TWS mode by long-pressing the “PLAY/PAUSE” button until you hear a confirmation tone. Alternatively, you can switch off the speaker you don’t want to hear or simply exit the Bluetooth© mode.

USB AND MEMORY CARD MODE

  1. When a USB device or memory card is inserted, the speaker will automatically switch to that source.
  2. Press “PLAY/PAUSE” to play or pause the playback, “PREVIOUS” to move to the previous track, or “NEXT” to move to the next track.
  3. It’s recommended to do not to use folders to store your audio files. The unit is only capable to read mp3, wave WMA files.
  4. Both, the USB device and memory card shouldn’t be greater than 32GB.

AUXILIARY MODE

  1. You can connect an external audio source such as a PC, notebook, or phone using the 3.5mm auxiliary cable (not included).
  2. Connect the cable to the source device and then to the “LINE IN” jack. The speaker will automatically switch to that mode.
  3. You can also switch to the “AUXILIARY” mode by pressing “MODE” on the unit (an auxiliary source must be present).
  4. While in “AUXILIARY” mode, short press “PLAY/PAUSE” to pause the current playback and press it again to resume it, to navigate among tracks, use your source device.

KARAOKE MODE

  1. You can simultaneously connect up to 3 microphones (2 wired + 1 wireless) to your speaker. Be aware that no other wireless microphone besides the one that was originally included will work with the unit.
  2. Before starting, make sure that your wireless microphone has batteries (2 AA batteries) and it was turned on. Batteries are not included.
  3. While a microphone is connected you can make some audio adjustments that will enhance your karaoke experience.
    a.To adjust the volume of the microphone(s) press repeatedly “MENU” until you see “NU” on the display and then turn the “VOLUME” knob to set the desired level.
    b. To adjust the echo of the microphone(s) press repeatedly “MENU” until you see “NE” on the display and then turn the “VOLUME” knob to set the desired level.
    c. Long press “PLAY/PAUSE” to turn on/off the microphone priority.

FM RADIO MODE

  1. To switch to “FM” mode, press “MODE” until you see a radio frequency on the display.
  2. To scan and store FM stations, press “PLAY/PAUSE” and the speaker will start searching for the stations with the strongest signal and will automatically store them. You can store up to 99 FM stations.
  3. Press “PREVIOUS” or “NEXT” to move from the current station to the previous or next stored station.

VOICE RECORDING

  1. Insert an SD card and then connect and turn on the microphone. On your remote control press “REC” to start your recording. The display will show “REC” and the recording time.
  2. Once you finish your recording press “REC” again.
  3. To listen to your last recording press “REC PLAY”.
  4. Each recording will be stored as a new file within the SD card inserted. To search for a specific recording, press “PREVIOUS” or “NEXT”.
  5. Press “R-DEL” to delete the current recording.
  6. Press the “MODE” button to exit the “VOICE RECORDING” mode.

FEATURES & TECHNICAL SPECIFICATIONS

▪Output power (W): 4000 (PMPO)
▪5.5″ powered active speaker (2) + 3” tweeter
▪Charging time (hr): 5
▪Playing time (hr): 5 (80% volume)
▪Playing modes: Bluetooth©, USB, SD card, auxiliary-in & FM radio
▪Preset equalizer modes (Rock, Pop, Clasico, Jazz y Normal)
▪Integrated RGB lights playing in sync with the music
▪Digital display
▪Bass, treble, and volume controls
▪Voice recording
▪Microphone priority
▪1/4″ microphone input with independent volume and echo controls
▪3.5mm audio input| ▪Battery status indicator
▪Independent power and RGB lights switches
▪Impedance (Ohm): 4
▪Frequency response (Hz): 55 ~ 20,000 (+/-3db)
▪Sensitivity (dB): 85 (+/-2db)
▪Bluetooth© version: 5.0
▪Bluetooth© range (m): 25
▪Wireless microphone range (m): 6 ~ 10
▪Wireless microphone frequency (MHz): 775
▪Lithium-ion rechargeable battery (V/mAh): 7.4/3000
▪Power adapter input (VAC – Hz): 100 ~ 240 – 50/60
▪Power adapter output (VAD/A): 9V/2A
▪Dimensions (in): 22.24 x 10.03 x 10.03
▪Weight (lb): 10.14
---|---

PACKAGE CONTENT

  • TWS party speaker
  • Wireless karaoke microphone
  • Remote control
  • Power adapter
  • User’s manual

FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Legal notice: All names, logos, images, and registered trademarks are the property of their respective owners. Images and colors may differ from the actual product. Support: For additional support and more details about how to set up your device, please visit https://unnotekno.com.

http://www.unnotekno.com

© 2020 Unno Tekno LLC.
All Rights Reserved.
© 2021 Unno Tekno LLC.
Todos los Derechos Reservados.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals