ENTOVE CPD0601 Solar Pathway Light User Manual
- June 15, 2024
- ENTOVE
Table of Contents
User Manual
Solar Pathway Light
NOTE: Please read the user manual carefully before processing use and installation.
CONSTRUCTION
- Solar Panel
- Switch
- LED
- Cover
- Lens
- Connecting Pole
- Ground Spike
LIGHTING MODE
Automatic Lighting (light sensor)
The solar pathway light automatically turns on at night until the daytime or
the battery is power off. It automatically turns off and charge the battery in
the daytime.
INSTALLATION
Step 1:
Pressing the switch at the bottom of the top housing(A) to turn on the light.
Step 2:
Twist and secure cover(B) to lens (C)
Step 3:
Attach the top housing(A) and cover (B)
Step 4:
Attach the light assembly to connect pole(D) and ground spike (E) to the
bottom of connecting pole (D). Then push light into the ground.
SPECIFICATION
Ni-MH Battery: AA, 1.2V
Solar Panel:0.4W, 2V
Working Temperature:0℃~+55℃
IP Rating:IP54
IMPORTANT
- Charge solar panel in direct sunlight at least 8 hours to fully charge the battery.
- The solar lamp needs to be placed somewhere which can get direct sunlight regularly.
- Solar panel surface must be kept clean to absorb sunlight effectively.
NOTE
- The charging time depends on the intensity and duration of sunlight.
- The lighting time depends on the power it saved in the day.
- Seasonal conditions, including cloudy, rain, snow, fog and extreme cold temperatures can affect battery charged. In such cases, the lamp output will be affected.
CAUTION
This product contains rechargeable Ni-MH battery.
Battery must be recycled or disposed of properly.
PACKAGE INCLUDE
- Top Housing
- Cover
- Lens
- Connecting Pole
- Ground Spike
- User Manual
FAQ
i.The lamp doesn't work.
1.Make sure the lamp is switch on. Turn on the switch, cover the solar panel with an opaque material, and test whether the lamp can be work. 2.The battery is out of power and charge the battery by solar panel in direct sunlight. 3.The installation location must be far from other light source.
ii.Charging Time.
1. Charging for about 8 hours each day is recommended. All solar products' charging time is affected by weather condition and installation location. 2.The longer sunshine time and the more power sunshine intensity, the higher charging efficiency and the shorter charging time.
iii.Lighting time is short.
1. The working time depends on the power which stores in the rechargeable battery. 2. The more power it charges during the day, the longer time it works during at night.
CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment) This making shown on the product or
its literature, indicates that it should not be disposed with other household
wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sus tainable reuse of material resources.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>