HOFTRONIC 4401429 PIR Motion Sensor 360 White User Manual

USER MANUAL
PIR MOTION
SENSOR 360°
SKU 4401429
4401436

DECLARATION OF CONFORMITY

DOCUMENTATION
This product has been manufactured and sup- plied in compliance with all relevant regulations and directives applicable to all member states of the European Union. The product complies with all applicable regulations and rules in the country of sale.
Formal documentation such as the declaration of conformity, the safety data sheet and the product test report is available upon request.

CE DECLARATION
The product complies with the following direc- tives:
LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
The complete Declaration of Conformity Document (DOC) is available upon request.

INSTALLATION MANUAL

1. Remove the transparent vinyl cover at the bottom of the motion sensor (img. 1).
2. Loosen the screws in the connection terminal. Connect the power to connection terminal of the motion sensor according to the connection diagram (img. 2)(img. 3).
3. Reinstall the vinyl cover. Fold the metal spring of the motion sensor upwards. Insert the motion sensor into the hole or installation box. Once Released, the springs will fix the motion sensor in place (img. 4)(img. 5).
4. Turn the LUX knob clockwise to the maximum setting (sun). Turn the TIME knob anti-clockwise to the minimum setting (10s) (img. 6).
5. Turn on the power. After a warm-up time of 30 seconds, the motion sensor will start operation. When the sensor receives the induction signal, the connected lamp will turn on. If the motion sensor receives no further induction signal, the load stops working within 10 seconds (±3 seconds) and the connected lamp will turn off.
6. Turn the LUX knob anti-clockwise to the minimum setting (3). If the ambient light is more than 3LUX, the motion sensor will not activate and the connected lamp will not turn on. If the ambient light is less than 3LUX, the motion sensor will activate. If no induction signal is present, the motion sensor will deactivate within 10 seconds (±3 seconds) (img. 6).

MANUAL OVERRIDE FUNCTION

1. Sensor mode: Stay on
   Now switch wall switch OFF-ON, OFF-ON twice within 3seconds. The sensor will now hold your light ON continuously just likes a normal light.

2. Stay on: Sensor mode(The following either method is ok)
   1). Switch your wall switch OFF, then switch ON after 0.3seconds.
   2). If the light left ON (not change the sensor to sensor mode by hand), the sensor itself will also automatically return to the sensor mode after 8hours.

TECHNICAL SPECIFICATION

DETECTION RANGE: 360°
VOLTAGE: 220-240V/AC
FREQUENCY: 50/60Hz
RATED LOAD: 1200W (Incandescent lamp) 600W (Energy-saving lamp & LED lamp)
DETECTION DISTANCE: max. 8m (<24°)
TIME DELAY: 10sec ± 3sec to 15min ± 2min (adjustable)
AMBIENT LIGHT: <3-2000LUX (adjustable)
INSTALLATION HEIGHT: 2.2-4m

FREQUENTLY ASKED QUESTIONS

1.WHY DOES THE LOAD NOT WORK?
–  1.) Please check if the connection of power source and load is correct.
– 2.) Please check if the load is good.
– 3.) Please check if the ambient light setting correspond to the ambient light.
2. WHY IS THE SENSITIVITY POOR?
– 1.) Please check if there is any hindrance in front of the detector to affect it to receive the signals.
– 2.) Please check if the ambient temperature is too high.
– 3.) Please check if the induction signal source is in the detection field.
– 4.) Please check if the installation height corresponds to the height required in the instruction.
– 5.) Please check if the moving orientation is correct.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Product has a protective contact/terminal. Failure to connect the protective lead may lead to electric shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Product can be used indoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. Non-demountable product. Not suitable for independent repairs.

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of postpackaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising.
Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about
Hoftronic products visit www.hoftronic.com. Hoftronic shall not be responsible for any damage resulting from the failure to follow these instructions. Hoftronic reserves the
right to make changes in the manual – the current version can be downloaded at www.hoftronic.com.

Imported by
HOF Trading B.V. Graafschap Hornelaan 137 A
6001 AC Weert The Netherlands
www.hoftronic.com
Made in P.R.C.

References

• HOFTRONIC - HOFTRONIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>