GranberG 100.0401 Food Approved Reusable Gloves User Manual

: June 9, 2024
: GRANBERG

Table of Contents

100.0401 Food Approved Reusable Gloves
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ART. 100.0401
cat. II
12 pairs

SIZE 6/XS, 7/S, 8/M, 9/L, 10/XL ,11/2XL,12/3XL (EN 420:2003+A1:2009)

100.0401 Food Approved Reusable Gloves

1/A = minimum requirement
4/5/F = maximum requirement
X – not tested
The results are taken from the palm area of the gloves.
The protection level increases with performance class.

EN 420:2003+A1:2009

This product is classed as Category II Personal Protective Equipment (PPE) according to PPE Regulation (EU) 2016/425 and has been shown to comply with this Regulation through the Harmonised Standards EN 420:2003+A1:2009, EN 388:2016+A1:2018. Notified Body responsible for certification (Module B):
Name: SATRA Technology Europe Ltd.
Address: Bracetown Business Park, Clonee, Dublin D15 YN2P, Republic of Ireland.
Notified Body No: 2777
Declaration of Conformity can be obtained from https://www.granberg.no/catalog/100.0401

Glove size	XS	S	M	L	XL	2XL	3XL
EN 420 size	6	7	8	9	10	11	12

Wear the products of suitable sizes to provide optimal level of protection and maximum grip. User must only choose the glove fitting the size of her/his hand.

User Manual issue date: 27.06.2022

OEKO-TEX®
CONFIDENCE IN TEXTILES
STANDARD 100
21.HNO.59941 HOHENSTEIN HTTI
Tested for harmful substances www.oeko-tex.com/standard100

Granberg AS, Bjoavegen 1442, NO-5584 Bjoa, NORWAY

Seamless glove made of Nylon/Spandex liner coated with foam water-based PU without any DMF. Approved to direct contact with the specific food types. Extremely comfortable and soft with very good breathability. Ideal for work that requires very good touch sensitivity. Highly recommended to work with food.
Storage/Transport: The gloves are first packed in plastic bags which are subsequently packed in cardboard boxes for transport and storage. Granberg recommends storing unused gloves in original packaging. Prevent direct sunlight.
Maintenance/Washing instructions: Both new and used gloves should be inspected before use, and before putting them on to make sure that there is no damage to them. If in doubt, discard the gloves and select a new pair. Leaving the gloves in a contaminated condition may cause a deterioration of quality. Gloves comply with the cleaning standard ISO 6330:2012; the test was performed on unused gloves. Gloves’ performance is
guaranteed by the manufacturer for up to 10 washes. Washing must be performed using a domestic washing machine and standard liquid detergent at 60°C, tumble dry at low temperatures. Washing does not alter the gloves’ mechanical performance. Gloves must be dry before each use.
The customer holds sole responsibility for complying with the washing/drying instructions. Improper washing/drying can influence the gloves’ performance. Manufacturer can accept no responsibility once gloves have been washed.
Obsolescence: Service life depends on application and maintenance and cannot be specified. It is the responsibility of the user to ascertain the suitability of the gloves for the user’s task or tasks.
Please note: The gloves should be inspected for any damage before use. The gloves shall not be worn when there is a risk of entanglement with moving parts of machine Gloves meeting the requirement for resistance to puncture may not be suitable for protection against sharply pointed objects such as hypodermic needles. Gloves containing latex may cause allergic reactions in cases of hypersensitivity to latex. Seek medical advice if applicable. None of the raw materials used in glove, or process of manufacturing it, are known to be harmful to the user. Gloves comply with Regulation (EC) No. 1935:2004 and Regulation (EC) No. 2023/2006, and according to Commission Regulation (EU) No. 10/2011, they are suitable for handling all types of foods except for fatty foods for short periods of time. These gloves are intended to protect hands in working environment in accordance with EN 388:2016+A1:2018 and EN 420:2003+A1:2009. It is the responsibility of the user to evaluate and determine risks based on the intended application. The gloves should only be used for applications declared suitable by the manufacturer. Risk should be evaluated keeping in mind the protection levels and the harmonized standards on which gloves are tested. The results of the tests should help in glove selection, however it must be understood that actual conditions of use cannot be simulated and it is the responsibility of the user, not the manufacturer, to determine glove suitability to the intended use. Further information may be obtained from manufacturer.