GE Lighting 00182 StayBright Random Sparkle LED 3pc Spheres User Guide

**GE Lighting 00182 StayBright Random Sparkle LED 3pc Spheres User Guide

**

READ AND FOLLOW ALL SAFETY INSTRUCTIONS CAUTION:

• To reduce the risk of fire and electric shock:
  a) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal, and
  b) Do not mount or support strings in a manner that can cut or damage wire insulation.

• To reduce the risk of overheating, replace burned out lamps promptly. Use 3.3 V, 20 mA LED lamps only.

• This is an electrical product – not a toy! To avoid the risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.

• This product is equipped with non-shunted LED type lamps. Do not twist lamps. Push straight in or pull out to avoid damage.

• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided contact a qualified electrician for proper installation.

• This seasonal use product is not intended for permanent installation or use.

• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

• Do not let lamps rest on the supply cord or on any wire.

• Unplug the product when leaving the house, when retiring for the night, or if left unattended.

• Do not use this product for other than its intended use.

• Do not hang ornaments or other objects from cord, wire, or light string.

• Do not place lighting string on carpeting, drapes, furniture, or allow it to contact inyl siding while the power is on.

• Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.

• Do not close doors or windows on the product or extension cord as this may damage the wire insulation.

• Do not cover the product with cloth, paper or any material not part of the product when in use.

• Read and follow all instructions that are on the product or provided with the product.

USE AND CARE INSTRUCTIONS

• When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
• If the product is placed on a tree, the tree should be well secured and stable.
• Before using, or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
• When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.

USER SERVICING INSTRUCTIONS

1. LED REPLACEMENT INSTRUCTIONS-Use the LEDs provided with this product, follow these steps:
   a. Make sure the light set is unplugged.
   b. To unplug, grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling the cord.

2. CAUTION: To reduce the risk of overheating, Replace with only GE 3.3 V, 20 mA LED type lamps (provided with product)
   Instructions for replacing bulbs: If a damaged or burned out bulb needs to be replaced, we recommend wearing gloves throughout the replacement process. While holding the sphere with one hand, grab the damaged bulb closest to the husk and gently pull straight up and out of the socket. Insert the spare replacement bulb that is provided with this product into the empty socket

3. Grip the base of the burned out LED and pull straight out of the socket. Hold replacement LED by its base and insert into thecorrect position inside the socket. Push base into socket all the way.

Connecting Sets End to End

• This lighting string is rated 14.4 Watts (0.12 Amps), do not overload. GE light set come pre-attached to a plug. For end-to-end connections up to three (3) sets, you will need only one (1) plug. To begin, choose one (1) set as your master set. This set would be the only set connected to a plug. Next, unscrew the coaxial connector between the light set on all of the sets you would connect to your master set. Lastly, connect each set of lights end-to-end using the coaxial connections, screwing each connection cap tightly.
  Note: you may only add two (2) additional sets to your master set for a total of three (3) connected sets.

CAUTION: To reduce the risk of overheating, a) replace burned out lamps promptly. Use 3.3 V, 20 mA LED lamps provided with this product .b) Risk of fire .This product does not contain lamp shunts in order to allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.
Warning:
Do not use where only part of the power unit is protected from rain

NOTE: Use only this GE branded, Class 2 Power Supply, Model TS-5W29V, manufactured by Guang Zhou Ting Shen Electric Co Ltd. that was provided with this product. DO NOT use this adapter with any other product

For customer service call: 1-866-489-0019
OPERATING HOURS:

• January 3 – November 11: Monday to Friday, 10AM-7PM EST,

• November 12 – December 23:
  Monday to Friday, 8AM-8PM EST, Saturday & Sunday,10AM-7PM EST

• December 26 – 29: 10AM-7PM EST
  See complete schedule at
  www.geholidaylighting.com
  ©2022 Nicolas Holiday Limited, 9F., No. 37,
  Guangfu N. Rd Taipei, Taiwan 10560.
  All rights reserved. This is not a toy. For decorative use only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>