TROND Prime Z Surge Protector Power Strip USB User Manual
- June 14, 2024
- TROND
Table of Contents
Prime Z
WELCOME GUIDE
Surge Protector w/ USB Charger
To
Grow & Thrive
SAFETY PRECAUTIONS
Please read these instructions carefully and retain this welcome guide for future use. When using electrical appliances, the following safety precautions should always be observed to reduce the risk of fire, electric shock, or injury to persons:
WARNING – Intended Use
This product is intended to be used in household indoor areas only, and not intended for commercial use. Do not use it in General Patient Care Areas or Critical Patient Care Areas. Keep away from children.
WARNING – Grounding and Polarization
Plug into a standard 3-wire grounded outlet only, and do not use it with a receptacle in which the slot opening does not align with the blades.
WARNING – Daisy Chaining
This product must be plugged directly to a wall outlet, and should not be
“daisy-chained” together in series with other power strips or surge
protectors.
WARNING – Liquid
This product should not be used with aquariums, near water or any other source
of moisture. Do not operate this product, if liquid of any kind is spilled
onto or inside it.
WARNING – Heat
Do not place it near heat sources such as wall heaters. Never cover it with
carpet, furniture or anything that would prevent air circulation or cause
temperature increase. Shut off the unit immediately if it ever becomes hot to
touch.
WARNING – Overloading
Do not overload the product’s outlets. If the load exceeds 10A / 1250W
(whether plugged into a single outlet or spread out over multiple outlets),
the built-in circuit breaker will trip. In this case, reduce the load by
unplugging some devices and reset the power switch.
WARNING – No User Serviceable Parts Inside
Do not open the housing for any reason, as there’re no user-serviceable parts
inside. Product warranty will be voided and no liability will be accepted if
the product is dismantled.
Product Diagram
- Slim Power Plug (0.55” Thickness)
- Power Switch with Circuit Breaker
- LED Power Indicator (White)
- Surge Protection Indicator (Green)
- 4 Grounded AC Outlets
- USB-A Output: DC 5V 2.4A Max UUSB Total Output: DC 5V
- 3.4A, 17W USB-C Output: DC 5V 3.0A Max (PD Quick Charging Not Supported)
Specifications
| Model | Prime Z |
|---|---|
| Material | UL94 V-0 Flame-Retardant PC+ABS |
| Input Voltage | AC 100-250V, 50 / 60Hz |
| Rated Power | 1250W (125V / 10A) |
| Surge Energy Rating | 1440 Joules |
| USBA Output | DC 5V 2.4A Max |
| USBC Output | DC 5V 3.0A Max |
| USB Total Output | DC 5V 3.4A, 17W |
| Dimensions | 3.94 x 3.94 x 1.10 in. (LWH) |
| Net Weight | 0.62 lb / 0.28 kg (5ft version) |
0.83 lb / 0.38 kg (10ft version)
1.05 lb / 0.48 kg (15ft version)
Product Features
- Turns a regular wall outlet into 4 protected AC outlets, 3 USB-A ports & 1 USB-C port, and eliminates the need for multiple chargers, saving money & desktop space for you;
- Four widely-spaced AC outlets (48mm vs. 30mm distance on regular power strips) can accommodate large power adapters without blocking other adjacent outlets;
- Each USB charging port can intelligently identify your mobile device, and seeks to maximize its charging speed (USB-A: 2.4A, USB-C: 3.0A output). Power Delivery charge technology for USB-C is NOT supported;
- Unique angled flat plug (0.55” thickness) fits easily in tight space or behind furniture, and doesn’t block the bottom receptacle of your duplex wall outlet;
- Rated at 1440 Joules, it can protect your computers or home/office electronics from power disturbances, such as lightning, surges and spikes;
Frequently Asked Questions
Q: Which USB port should I use to charge my device?
A: Both 3 USBA ports and 1 USBC port can support smart charging technology, and can charge any 5V device at full speed USBA: 2.4A, USBC: 3.0A output). For those devices with dierent voltage requirements, please plug your power block into the AC outlets instead.
Q: Can my phone be charged up quickly?
A: This product doesn’t support Quick Charge QC2.0/3.0/4+) or Power Delivery technology. Therefore, you may experience slow charging speed for your latest devices.
Q: Why can’t the USB ports charge my devices properly?
A: Please verify whether this power strip has been securely plugged into your wall outlet or whether your USB charging cable works properly. If yes, this product could become defective. In this case, please email us at support@etrond.com for the help.
Q: What shall I do when the surge protection indicator doesn’t light up?
A: It means that the surge protection has been exhausted and it can no longer protect your electric devices from power disturbances. It’s time to replace this unit for future protection.
Q: How do I check my device’s input current and voltage?
A: Please refer to your device’s user manual, original OEM charging adapter, or contact the device manufacturer to get this information.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>