EDIFIER EDF208 Wireless Noise Cancellation Over Ear Headphones User Manual

EDIFIER EDF208 Wireless Noise Cancellation Over Ear Headphones

Power ON/OFF

1. Power ON: press and hold the key for about 3s when powered OFF until the green LED blinks.
2. Power OFF: press and hold the key for about 3s when powered ON until the red LED blinks.

Note:

1. If there is no Bluetooth connection when the noise cancellation mode is off after powered on, the headphones will power off automatically in 5 minutes.
2. If there is no Bluetooth connection when the noise cancellation mode is on after powered on, the headphones will power off automatically in 4 hours.

Pairing

Pairing for the first time

1. Press and hold the key for about 3s when powered off. Red and green LEDs will blink alternately.
2. Select “EDIFIER WH700NB” in your Bluetooth device setting to connect. Green LED will blink twice in 5 seconds when successfully

Note:
For subsequent use, the headphones will automatically connect to the device used last time.

Pairing for new device

1. Press and hold the key for about 3s when powered on to skip the latest connected device and pair the new Bluetooth device. Red and green LED will blink alternately.
2. Select “EDIFIER WH700NB” in your Bluetooth device setting to connect. Green LED will blink twice in 5 seconds when successfully

Reset

Simultaneously press and hold the keys for about 5s until green LED blinks 6 times when powered on to clear the Bluetooth pairing records and re-enter Bluetooth pairing mode, red and green LED will blink alternately.

Dual-device connection

1. Pair Bluetooth device A with the headphones. Upon success, keep the headphones powered on, then press and hold the key for about 3s to re- enter the Bluetooth pairing mode, red and green LED will blink alternately， meanwhile, device A is disconnected from the headphones.
2. Select “EDIFIER WH700NB” in Bluetooth device B setting to connect successfully.
3. Select “EDIFIER WH700NB” in Bluetooth device A setting to connect manually

Note:

1. When a call comes, the headphones will automatically switch to the calling device. After the call ends, the headphones can switch back to the original device.
2. Voice assistant can be enabled on the latest active smartphone if two smartphones are paired with the headphones simultaneously.
3. Switching from device to device, pause music on the current device, and start playing audio on the second device you would like to switch to.
4. Each time when powered on, the headphones will automatically reconnect with the two most recently-connected devices if available within the effective Bluetooth range.

Status Light

Input: 5V 1A

Charging

1. Please connect the headphones to power source with the included Type-C charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.

Note:
Please do not charge the headphones when there is sweat or other liquids inside the charging port, which may damage the headphones.

Controls

Note:

1. —-:Press and hold.
2. Default sound control: noise cancellation & ambient sound & wind reduction.
3. Images are for illustrative purposes only and may differ from the actual product.
4. Download Edifier Connect App for more customizable control settings.

NCC statement:

Low-power radio frequency equipment that has obtained certification must not be changed by the company, firm or user without approval. frequency, increase power or change the characteristics and functions of the original design. The use of low-power radio frequency equipment must not affect flight operations security and interfere with legitimate communications; when interference is discovered, it should be stopped immediately and improved until there is no interference. continue to use. The aforementioned legal communications refer to radio communications operated in accordance with the provisions of the Telecommunications Management Act. low power RF Materials must endure interference from electrical equipment that radiates legitimate communications or industrial, scientific and medical radio waves.

Name and content of harmful substances in products

Equipment name: Type designation (Type): EDF 200126

Unit| Restricted substances and its chemical symbols
| Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr )| Polybrominated biphenyls (PBB)| Polybrominated diphenyl ethers (PBDE)
Metal parts| 0.1wt %| ○| ○| ○| ○| ○
Plastic parts| ○| ○| ○| ○| ○| ○
Cable| ○| ○| ○| ○| ○| ○
Circuit plate Yuan pieces| ○| ○| ○| ○| ○| ○
Note 1: “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the
Note 2: “ ○” indicates that the percentage content of the restricted substance does not exceed the
Note 3:  The “−” indicates that the restricted substance corresponds to the exemption

|

Scan and download Edifier Connect App

Note:
Images are for illustrative purposes only and may differ from the actual product.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC statement: CAN ICES-003(B) / NMB-003(B).

FCC ID: Z9G-EDF208
IC: 10004A-EDF208

217-230973

Input: 5V 1A

Hereby, Edifier International Limited declares that the radio equipment type EDF200126 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.edifier.com/int/eu-doc.html

Declaration for EU
Frequency Band: 2400Mhz-2483.5Mhz
RF Power Output: ≤16 dBm (EIRP)
There is no restriction of use.

“This equipment is not entitled to protection against harmful interference and cannot cause interference to systems duly authorized.”

Para consulta: www.anatel.gov.br

The Bluetooth® brand and its logos are registered by Bluetooth SIG, Inc. and any use of such marks by EDIFIER is under license. Others trademarks and trade names are the responsibility of their respective owners.

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly different from actual product.
If any difference is found, the actual product prevails.

Wireless Noise Cancelation Over-Ear Headphones

Customers Support

For more information, please visit our website:

www.edifier.com

@Edifierglobal

@Edifier_Global

@Edifier_Global

Model: EDF200126
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
©2023 Edifier International Limited. All rights reserved.
Printed in China

References

• Anatel — Agência Nacional de Telecomunicações
• Headphones, Speakers | A Passion for Sound -【Edifier】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>