dji Zenmuse H20N Camera User Guide

dji Zenmuse H20N Camera

Disclaimer and Warning

Congratulations on purchasing your new DJITM product. The information in this document affects your safety and your legal rights and responsibilities. Please read this entire document and all safe and lawful practice DJI provided carefully, and visit the DJI official website (https://www.dji.com) to download the full version of the user manual and carefully read all instructions and warnings therein before assemble, set and use. Failure to read and follow instructions and warnings in above documents or lack of strong awareness of safety during the operation may result in serious injury to yourself or others, or damage to your DJI product or damage to other objects. This document and all other collateral documents are subject to change at the sole discretion of SZ DJI Technology Co., Ltd. (DJI). They may be updated, changed or terminated without prior notification. For up to date product information, visit https://www.dji.com and click on the product page for this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies.

Export Compliance, Disclaimer & Indemnity

You acknowledge it is your responsibility to comply with applicable export control laws. You shall solely be responsible for the legal responsibility if any of your use, sale, transfer, rental, or other conduct related to the Products fail to comply with the applicable export control laws. DJI shall, in no circumstances, be responsible for your violation of any applicable export control laws. Furthermore, you shall indemnify, defend, and hold harmless DJI, its affiliates, directors, officers, employees, agents, and representatives, from and against any and all claims, demands, suits, causes of action, expenses (including reasonable attorneys’ fees), damages, losses, or liabilities of any nature whatsoever, arising from, or allegedly arising from, or related to, your failure to comply with applicable export control laws.

Modification Warning
The ZENMUSETM H20N has been calibrated specifically for the designated camera and lens before leaving the factory. No physical or mechanical modification or adjustment of the gimbal is required or recommended. DO NOT add any other component or device (such as a filter, lens hood, etc.) to the camera.
The Zenmuse H20N is a delicate instrument. DO NOT disassemble the gimbal or camera as this will cause permanent damage.

Aircraft Compatibility Warning
The Zenmuse H20N is compatible with the DJI MATRICETM 300 RTK. To optimize the performance of the gimbal, download the latest version of the DJI Pilot 2 app and update to the latest aircraft firmware.
Otherwise, the Zenmuse H20N may not function properly.

Safe Use

Make sure to operate your aircraft in the safest manner possible. Observe the procedures contained in the user manual and the online tutorials to mount and connect the gimbal to your aircraft.
By using this product, you hereby signify that you have read this disclaimer and warning carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, including international and domestic airspace regulations, and all terms, precautions, practices, policies, and guidelines DJI has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in the User Manual.

In the Box

• Gimbal and Camera (microSD card included) × 1

• Storage Case* × 1

• Lens Cleaning Cloth × 1

The Zenmuse H20N has its own storage case only when purchased individually.

Zenmuse H20N

Equipped with two long-wave infrared thermal cameras, a zoom camera, and a wide-angle camera, the Zenmuse H20N gimbal camera can provide infrared and visual images simultaneously. Users can quickly switch to a highly magnified zoom camera view after recognizing a target in a wide camera view. Thanks to the laser range finder, the H20N can provide the location of a target and the distance to them during a search and rescue operation or aid in site inspection with rapid positioning information that improves working efficiency.

Zenmuse H20N can be mounted onto the Matrice 300 RTK aircraft and stream live video to the DJI Pilot 2 app.

1. Gimbal Connector

2. Pan Motor

3. Wide Infrared
   Thermal Camera

4. Wide Camera

5. Laser Range Finder

6. Tele Infrared
   Thermal Camera

7. Zoom Camera

8. Tilt Motor

9. Roll Motor

10. microSD Card Slot

Installation

1. Remove the gimbal cap and lens protector.

2. Align the white and red dots and insert the gimbal onto the Matrice 300 RTK aircraft. Rotate the gimbal connector to the locked position.
   

   • Hold the aircraft firmly and steadily rotate the gimbal connector to attach and detach the gimbal.
   • Ensure the microSD card slot cover is firmly in place to prevent dust or moisture entering during usage or transportation.

Camera Controls

Remote Controller
Adjust the gimbal’s tilt using the left dial and adjust its pan by the right dial. Press the shutter button or record button to take photos or record video. Toggle the 5D button vertically to adjust the zoom and horizontally to adjust the EV value. The customizable button C1 can be used to recenter the gimbal, and the customizable button C2 can be used to switch between the main and auxiliary screen.

1. Left Dial
2. Record Button
3. Shutter Button
4. Right Dial
5. 5D Button
6. Customizable Button C2
7. Customizable Button C1

DJI Pilot 2 App Controls
Besides capturing photos, recording videos, and providing playback, the touch interface provides more intuitive and convenient control options such as Auto Night Scene, Spot Meter, Isotherm functions, and Link Zoom for visual and infrared thermal cameras.
The following image is for reference only. The actual interface varies according to the version of the app.

1. Camera and Zoom Rate
2. Palette/Isotherm
3. Display Mode
4. FFC Calibration
5. Camera Settings
6. Photo/Video Switch Button
7. Zoom (Zoom Camera)
8. Shutter/Record Button
9. Link Zoom
10. Playback
11. Zoom (Infrared Thermal Camera)
12. Gimbal Tilt
13. Laser Ranging
14. Wide Camera View Switch Button
15. Pin Point
16. Zoom Camera View Switch Button

Specifications

Aperture: f/1.6-f/11 Focus: 1 m to ∞ (wide); 8 m to ∞ (tele)
Wide Camera| —
Sensor| 1/2.7″ CMOS; Effective Pixels: 2M
Lens| DFOV: 73.6° Focal Length: 4.5 mm (equivalent: approximately 29 mm) Aperture: f/2.8 Focus: 1 m to ∞
Tele Infrared Thermal Camera| —
Thermal Imager| Uncooled VOx Microbolometer
Lens| DFOV: 12.5° Focal Length: 44.5 mm (equivalent: approximately 196 mm) Aperture: f/1.2 Focus: 45 m to ∞
Wide Infrared Thermal Camera| —
Thermal Imager| Uncooled VOx Microbolometer
Lens| DFOV: 45.5° Focal Length: 12 mm (equivalent: approximately 53 mm) Aperture: f/1.0 Focus: 5 m to ∞
Laser Range Finder| —
Wavelength| 905 nm
Maximum Power| 3.5 mW
Single Pulse Width| 6 ns
Measuring Accuracy| ± (0.2 m + target distance x 0.15%)
Measuring Range| 3-1,200 m (0.5 x 12 m vertical surface with 20% reflectivity)
Storage| —
Supported microSD Cards| Supports a UHS-I Speed Grade 3 microSD card with a capacity of up to 128 GB
Supported File System| exFAT
Environment| —
Operating Temperature|  -20° to 50° C (-4 to 122°F)
 Storage Temperature| -20° to 60° C (-4 to 140°F)

Compliance Information

FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: ZENMUSE H20N
Model Number: ZH20N
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above mentioned model was tested to demonstrate complying with all applicable FCC rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CAN ICES-003 (B)/NMB-003(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device(ZENMUSE H20N) is in compliance with the essential requirements and other relevant provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at
www.dji.com/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

INVISIBLE LASER RADIATION
DO NOT EXPOSE USERS OF TELESCOPIC OPTICS CLASS 1M LASER PRODUCT

IEC/EN 60825-1:2014. Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3.,as described in Laser
Notice No. 56, dated May 8,2019

The label is affixed to one side of the Zenmuse H20N

WE ARE HERE FOR YOU

Scan WeChat to follow DJI industry application service official account

This content is subject to change.
Download the latest version from https://www.dji.com/zenmuse-h20n
is a trademark of DJI.
Copyright © 2022 DJI All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>