dji D12000iE Multifunctional Inverter Generator User Guide

DJI D12000iE Multifunctional Inverter Generator

Disclaimer

Congratulations on purchasing your new DJITM product. Read this entire document and all safe and lawful practices DJI provided carefully before use. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree to only use this product for proper purposes. You agree that you are solely responsible for your own conduct while using this product and for any consequences thereof. DJI accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI. This document and all other collateral documents are subject to change at the sole discretion of DJI. This content is subject to change without prior notice. For up-to-date product information, visit www.dji.com and go to the product page for this product.
Warning

1. Please read these instructions carefully before use. Failure to follow the relevant instructions may result in property damage, personal injury, or death. The warnings and precautions in this manual do not cover all possible situations and the user must use common sense when using the product and maintain a cautious attitude.

2. Users must understand the operation of all control components and know how to stop the generator in emergency.

3. The engine has not been filled with engine oil before leaving the factory. Add SJ 10W-40 (or equivalent) engine oil before use.

4. To disconnect or reconnect the connector between the DC module and the generator, turn off the generator first. DO NOT perform these operations while the generator is running.

5. The generator must be placed on a flat and stable surface at least 1.5 m away from buildings or other equipment. Make sure there is sufficient space for ventilation.

6. The generator must be powered off when refueling.

7. DO NOT smoke next to the generator fuel tank and keep the generator away from flames or sparks.

8. Use the generator in an open and well-ventilated outdoor space. In order to prevent fire hazards, make sure that there are no flammable materials near the muffler or exhaust port when the generator is in use.

9. Keep the generator clean and tidy. Use a dry towel to clean the generator if any fuel or other flammable materials are spilled on the generator.

10. To avoid scalding, DO NOT touch the engine or the muffler while the generator is running.

11. DO NOT connect the generator to the mains supply or other generators. It must be used alone.

12. Place the generator in a location that cannot be accessed by passers-by or children. Children are not allowed to operate the generator. Keep children and animals away from the operation area.

13. Pay special attention to the warning and indicative signs and definitions on the generator as shown below:
    DANGER Poisonous Gas, Risk of Suffocation: DANGER Risk of Electric Shock
    DANGER Electricity: DANGER Risk of Fire
    CAUTION Risk of Scalding: Fill Engine Oil: Refuel

14. Make sure that there is little or no fuel in the fuel tank before transportation to avoid spilling.

15. Before use, make sure there are no obvious defects such as a broken terminal or worn cable.

16. Properly ground the generator before use. It is recommended to consult with a qualified electrician to ensure compliance with local electrical codes.

17. The generator exhaust contains poisonous carbon monoxide. DO NOT use the generator indoors or in other confined space.

18. DO NOT use the generator in the rain or in any other humid environment.

19. Maintain the generator on a regular basis to prolong its life cycle. Refer to Storage and Maintenance section to see specific maintenance procedures.

In the Box

• D12000iE Multifunctional Inverter Generator ×1
• Supporting Foot ×2
• Bolt (M6×45) ×4
• Nut (M6) ×4
• Caster ×2
• Wheel Shaft ×2
• Washer ×2
• Retaining Clip ×2
• Handle ×2
• Nut (M8) ×2
• Bolt (M8×50) ×2
• Wrench ×2
• Engine Oil Funnel ×1
• Spark Plug Socket ×1

Initial Installation

• Removing the Original Supporting Feet
• To install the casters and the matching supporting feet, remove the four original supporting feet first.

1. Nut
2. Original Supporting Foot
3. Bolt

Installing the Supporting Feet

Align the mounting holes on the supporting feet with those on the generator frame. Insert the bolts through the mounting holes and secure them with nuts.

Installing the Casters

Place the washer on the inner side of the mounting holes on the generator frame, insert the wheel shaft through the caster and the mounting holes, and secure it with the clip.

1. Wheel Shaft
2. Washer
3. Clip

Installing the Handles

Align the handle with the mounting holes on the generator frame, insert the bolt through the mounting holes, and secure it with a nut.

1. Bolt
2. Nut
3. Handle

Introduction

The D12000iE Multifunctional Inverter Generator (hereinafter referred to as the generator) combines the functionality of a battery charger and generator. Equipped with the electronic fuel injection system, the generator offers higher reliability with stable output and lower fuel consumption than generators that use a carburetor. The generator is capable of charging one intelligent flight battery at a time and also supports a 1500 W AC power output*. For compatible batteries, see the Specifications section.
The illustrations in this user guide may vary from the actual product.

• The AC power output of the generator may differ depending on your country and region. Refer to the Appendix section for details.

Overview

Generator

1. Fuel Tank Cap
2. Fuel Tank
3. Front Board
4. DC Module
5. Status LEDs
6. Charging Cable
7. Casters
8. Operation Panel
9. Muffler Shield
10. Spark Arrestor
11. Spark Plug
12. Handle
13. Engine Oil Dipstick
14. Engine Oil Drain Hose
15. Supporting Foot
16. Primary Air Filter
17. Electronic Fuel Injection Unit
18. Secondary Air Filter
19. Fan Hood
20. Frame
21. High-Pressure Oil Pipe
22. Oil Level Gauge

Operation Panel

1. Engine Switch
   Used to start or stop the generator. Refer to the Using the Generator section for more detailed information.

2. **AC Outlet***
   Used to connect with electric devices. The outlet meets the IP44 protection rating. Make sure to reinstall and fasten the outlet shield when not in use.

• The AC power output of the generator may differ depending on your country and region. Refer to the Appendix section for details. 3. Ground Terminal
  Use a ground cable and connect one end to the ground terminal and the other end to the ground. Proper grounding can help to avoid electric shocks in case of device failure.

Status LEDs

1. Charging Channel Status LED
2. DC Module Status LED
3. Generator (excl. DC Module)/AC Module Status LED
4. USB-C Connector Cover

to a battery
Blinks green once continuously| Charging
Solid green| Fully charged
Blinks yellow once continuously| Warning for the battery/charging channel
Blinks red once continuously| Battery/charging channel error
DC Module Status LED| Blink yellow four times continuously| DC module is not activated
Blinks yellow once continuously| Warning for the DC module
Blinks red once continuously| DC module error
Generator (excl. DC Module)/AC Module Status LED| Blink yellow four times continuously| The generator (excl. DC Module)/AC Module is not activated
Blinks yellow once continuously| Warning for the generator (excl. DC Module)/AC Module
Blinks red once continuously| Generator (excl. DC Module)/AC Module error
Blinks red four times continuously| Generator (excl. DC Module) maintenance is required

• When the status LEDs blink indicating a warning or error, connect the USB-C connector of the generator to the USB-A connector of the remote controller using a USB-C cable. Run the DJI AGRAS™ app on the remote controller and check the specific warnings or errors on the charging device interface.
• When the status LED blinks prompting for maintenance, connect the USB-C connector of the generator to the USB-A connector of the remote controller using a USB-C cable. Run the DJI Agras app on the remote controller and check the specific maintenance information on the charging device interface. When maintenance is finished, press the reset button on the charging device interface to turn off the status LED blinking for maintenance.
• If any part of the generator is abnormal or damaged, it is recommended to contact a DJI-authorized dealer or DJI Support to repair or replace the part.

Getting Started

Filling Engine Oil

• The generator has not been filled with engine oil before leaving the factory. It is necessary to add engine oil before use.
• Place the generator on a flat and stable surface, unscrew the dipstick, fill the engine with oil to the rated capacity, and screw the dipstick back on. The D12000iE Multifunctional Inverter Generator has a rated engine oil capacity of 1.1 L. Use SJ 10W-40 engine oil (or equivalent).

Refueling

• Fuel is highly flammable and explosive. Strictly follow the instructions to use. Before refueling the generator, power it off and wait until it has completely cooled down.

1. Loosen the fuel tank cap and refuel the fuel tank with the recommended type of fuel to the rated capacity according the oil level gauge*. The D12000iE Multifunctional Inverter Generator has a rated fuel capacity of 30 L.
2. Tighten the fuel tank cap after refuelling. Use a dry towel to wipe up if any fuel is spilled.
3. For recommended fuel types for different countries and regions, refer to the Appendix section.

• DO NOT power on the generator before filling engine oil or gasoline. Otherwise, the electronic fuel pump may be damaged.
• DO NOT overfill fuel. Spilling can lead to a fire or explosion.
• Using ethanol fuel may increase the fuel consumption.

Pre-Operation Checking
In order to ensure your safety and preserve the service life of the generator, take some time to check the conditions of the generator before each operation. Make sure any issues or malfunctions have been resolved before operation. Before starting the pre-operation check, make sure the generator is placed on a stable place and the engine switch is in the OFF position.

Common Check-Up Items

1. Check whether there is any spilled engine oil or fuel around or under the generator.
2. Remove any flammable materials in the surrounding area especially around the muffler and the fan hood.
3. Repair or replace any rusted, broken, damaged, deformed, or loosened parts.
4. Check whether the muffler shield and the fan hood have been securely installed in place and whether all the nuts, bolts, and screws have been tightened.

Important Check-Up Items

1. Checking the fuel level: Fill up the fuel tank before operation to reduce the chance of an operation being interrupted by a low fuel level.
2. Checking the engine oil level: Working with a low engine oil level will cause damage to the engine. When the engine oil amount falls below the safety level, the built-in engine oil sensor will stop the engine from working. Check the engine oil level before each operation to avoid the inconvenience caused by unexpected flameout.
3. Checking the sponge filter element of the air filter: A dirty sponge filter element decreases the air entering the electronic fuel injection unit, which reduces the generator performance.

Using the Generator

Activation

The generator must be activated before using for the first time. Connect the remote controller to the internet first. Use a USB-C cable to connect to the USB-C connector of the generator and the USB-A connector of the remote controller. Run the DJI Agras app on the remote controller and tap on the upper left corner of the main interface to enter the charging device interface to activate the generator.

Starting the Generator

1. DO NOT connect to any electric devices before starting the generator.
2. Make sure the engine has been filled with engine oil and the fuel tank with no less than 1L fuel.
3. Connect the charging cable to an Intelligent Flight Battery that is powered off. Press and then press and hold the power button on the battery to power on the battery. D12000iE Multifunctional Inverter Generator can connect with a T40/T30/T20P Intelligent Flight Battery.
4. Move the engine switch to the Start position and hold for at least 3 seconds and then release. The engine switch will return to the ON position and the generator will start automatically.
5. The generator starts to charge the battery. Each of the four LEDs of the battery blinks successively during charging. Remove the battery when the four LEDs turn solid or off and connect another battery to charge.

• he battery must be powered off before connecting it to the generator.
• The generator automatically attempts to start a maximum of three times every time the engine switch is moved to the Start position with an interval of five seconds between each start attempt. If the generator fails to start after three automatic attempts or stops right after starting, connect it to the remote controller to see more information regarding the malfunction.
• If there are any working electric devices connected to the AC outlet while charging the battery, the charging capacity for the battery will decrease accordingly and the charging time will be extended.

Stopping the Generator

1. Turn off all connected electric devices.
2. Move the engine switch to the OFF position and the generator will stop running.
3. Disconnect all connected electric devices.

Storage and Maintenance

Storage

Follow the steps below for storage if the generator will not be used for more than 30 days.

1. Before storage, start the generator and let it run for five to ten minutes to warm up. Next, stop the generator to drain the engine oil. Oil Drain Bolt

2. Take down the engine oil drain hose, open the cap by rotating it counterclockwise, and drain all the engine oil.
   To avoid scalding, DO NOT touch hot engine oil.

3. Install the engine oil drain hose back in place and rotate the cap clockwise to tighten it.

4. Remove the fuel drain bolt on the bottom of the fuel tank, drain the fuel with a funnel, and store the fuel in a dedicated container to avoid gum formation. Install the fuel drain bolt back in place after the fuel is completely drained. Clean the funnel and wipe it with a dry cloth before storage.

5. Press to open the latch on the connector of the high-pressure oil pipe, take down the pipe, and drain the fuel inside. Install the pipe back in place.

6. Place the generator in a cool, dry, and clean place.

High-Pressure Oil Pipe Connector

Transportation

The generator especially its exhaust system can become very hot during running. To avoid scalding or fire of flammable materials, if the generator has been running, wait for at least 15 minutes to let it cool down before moving it into a transportation vehicle. Make sure the generator is stable during transportation to avoid spilling.

Maintenance

• Scan the QR code on the fuel tank to view the tutorial videos or refer to the labels and stickers on the generator for maintenance instructions.
• Check and maintain the generator regularly to keep it in good condition.

Maintenance Safety Notes

• Before maintaining, stop the generator, disconnect all the electric devices and batteries, and let the generator cool down completely.
• Maintain the generator in a clean, dry, and stable place. Make sure the generator cannot move by accident.
• Read the user guide before operation and make sure you have all the tools and the necessary skills.
• Be extremely careful when using the generator near fuel to decrease the possibility of a fire hazard or explosion. Use non-flammable solvent to clean the parts. DO NOT use fuel for cleaning. Keep the parts with fuel away from cigarette buttes, sparks, and fire.

Maintenance Schedule

• Follow the maintenance schedule in table below. The maintenance frequency should be increased if the generator is running in a dusty or another harsh environment.
• Contact a DJI-authorized dealer or DJI Support to perform the maintenance items marked with an asterisk. For any other maintenance items not covered by this document, contact a DJI-authorized dealer or DJI Support.

Item| Every operation| Every 10

operating

hours

| Every 20

operating

hours

| Every 50

operating

hours

| Every 100

operating

hours

| Every 300

operating hours/1

year

---|---|---|---|---|---|---
Engine Oil| Level check| √| | | | |
Replacement*| | | First Use| √| |
Air Filter Sponge

Filter Element

| Check/Cleaning| | √| | | |
Replacement*| | | | | | √
Air Filter Paper

Filter Element

| Check/Cleaning| | | | √| |
Replacement*| | | | | √|
Spark Arrestor| Cleaning| | | | | | √
Spark Plug

(Model: F7RTC)

| Check/Cleaning/

Replacement*

| | | | | | √
Valve Clearance| Adjustment*| | | | | | √
Fuel Passage| Cleaning/

Replacement*

| | | | | | √
Fuel Pipe| Replacement*| Every 2 years (or when necessary)

• A maintenance interval of every 300 operating hours/1 year means the user should perform maintenance based on which scenario occurs first.
• The fuel passage maintenance after 300 operating hours means that users should contact a DJI-authorized dealer or DJI Support to check or replace the built-in filter mesh of the electronic fuel pump and clean the fuel passage and fuel injection unit. The replacement interval varies depending on the quality of the fuel. The interval should be shortened if the fuel quality is poor.
• Engine oil consumption increases if using the generator in high-temperature environments. Fill up the engine oil to the rated level before each use and shorten the interval of replacing the engine oil.

Checking the Engine Oil Level

1. Stop the generator and place it on a flat surface.
2. Unscrew the dipstick and wipe it out with a clean cloth.
3. Insert the dipstick as shown without screwing it in. Take the dipstick out and check the oil level.
4. Add the recommended type of engine oil to the upper limit position if its level is near or below the lower limit mark. DO NOT add too much engine oil. Otherwise, the oil may spill.
5. Install the dipstick and tighten it.

• Damage to the generator caused by running with a low engine oil level is not covered by warranty.
• Damage to the engine resulting from failure to replace the engine oil by following the maintenance schedule is not covered by warranty.
• Damage to the engine caused by use of non-recommended engine oil is not covered by warranty.

Replacing Engine Oil

• Contact a DJI-authorized dealer or DJI Support to replace the engine oil.

1. Place the generator on a flat surface. Start the generator to warm up the engine for several minutes and then stop the generator.
2. Place a container under the engine oil drain hose.
3. Take down the engine oil drain hose and rotate the cap counterclockwise to open. Wait for the oil to drain completely.
4. Install and secure the engine oil drain hose back in place. Rotate the cap clockwise to tighten it.
5. Unscrew the dipstick and use the engine oil funnel to add the SJ 10W-40 engine oil (or equivalent) to the upper limit. Put the dipstick back in and screw tight.

• Engine oil significantly affects the engine performance and is the main factor that determines its service life. It is recommended to use oil intended for four-stroke car engines and that meets or exceeds SJ standards according to the API classification. Normally, the API grade is shown on the package of engine oil bottle. Make sure it says SJ or a higher grade. The recommended engine oil type is SJ 10W-40.
• To prevent damage to the environment, it is recommended to seal used engine oil in a container and hand it over to a dedicated recycle center. DO NOT dispose of used engine oil in normal household waste, on the ground, or down a sewer drain.

Checking and Cleaning Air Filter Element

1. Remove the cover of the primary air filter and take out the sponge filter element. Clean the sponge filter element thoroughly in warm soapy water and let it dry under the sun. Clean the dust in the filter housing.

2. Immerse the sponge filter element in clean engine oil and squeeze out the excess engine oil. Put the sponge filter element back in the filter and reinstall the cover.

3. Remove the cover of the secondary air filter and
   take out the paper filter element. If the paper filter element surface becomes wet with engine oil or fuel or is obviously stained and more than 10% discolored, contact a DJI-authorized dealer or DJI Support to replace the paper filter element. If it is not necessary to replace the paper filter element, tap it gently on the ground to shake off any dust and debris. Clean the dust in the filter housing, and use a carburetor cleaning agent to clean the engine oil in the cover and wipe it dry.

4. Put the dry paper filter element back in the filter and reinstall the cover.

• Replace the sponge filter element if it is damaged during cleaning.
• DO NOT use an air blower or compressed air to clean the paper filter element as it may cause damage to the intake pores of the element.
• Make sure the sealing ring is still intact in the groove when installing the cover again.

Cleaning the Spark Arrestor

1. Use a screwdriver to remove the bolts and the protective cover. Take out the spark arrestor.
2. Inspect the spark arrestor. Wash it with a cleaning agent for carburetor and descale it with a wire brush. Replace the spark arrestor if it is damaged.
3. Install the cleaned or new spark arrestor and tighten the bolts.

Checking, Cleaning, and Replacing the Spark Plug

• Contact a DJI-authorized dealer or DJI Support to maintain the spark plug.

1. Stop the generator and make sure it has cooled down completely.
2. Unscrew the spark plug with the dedicated spark plug socket and check the spark plug. Replace the spark plug immediately if the insulator or the sealing gasket is broken.
3. Remove the carbon deposit or other deposit with a stiff wire brush.
4. Adjust the electrode to make sure the gap is within a standard range of 0.6 to 0.8 mm.
5. When installing the spark plug again, thread the spark plug into the engine by hand for two to three rotations.
6.  Continue tightening with the dedicated spark plug socket.

• The recommended torque is 20-24 N·m. A loose spark plug causes the engine to overheat, while tightening the spark plug too much will cause damage to the threads in the engine.
• The original spark plug model is F7RTC. Installing the wrong type of spark plug will damage the engine.
• To ensure proper operation of the engine, make sure the spark plug gap is correct and there is no deposit.

Specifications

working at an altitude higher than 1000 m.)
Rated Rotation Speed of Engine| 3600 RPM
Fuel Type| Refer to the Appendix section.
Engine Oil Type| SJ 10W-40
Fuel Tank Capacity| 30 L
Engine Oil Capacity| 1.1 L

Rated Output

| DC: 59.92 V

AC: Refer to the Appendix section.

Rated AC Power| Refer to the Appendix section.
Total Rated Power| 9000 W
Maximum Engine Power| 12000 W
Compatible Batteries| T40/T30/T20P Intelligent Flight Battery
Dimensions| 765×740×705 mm

Compliance Information

California and Federal Exhaust and Evaporative Emissions Control Warranty Statement

YOUR WARRANTY RIGHTS AND OBLIGATIONS
For EPA & CARB certified engine/equipment The California Air Resources Board, the United States Environmental Protection Agency and DJI Technology, Inc. (DJI), are pleased to explain the exhaust and evaporative emissions (“emissions”) control system warranty on your 2022/2023 small off-road engine/equipment. In California, new equipment that use small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. DJI must warrant the emissions control system on your small off- road engine/equipment for the period listed below provided there has been no abuse, neglect or improper maintenance of your small off-road engine/equipment leading to the failure of the emissions control system. Your emissions control system may include parts such as the carburetor or fuel-injection system, the ignition system, catalytic converter, fuel tanks, fuel lines (for liquid fuel and fuel vapors), fuel caps, valves, canisters, filters, clamps and other associated components. Also included may be hoses, belts, connectors, and other emission-related assemblies. Where a warrantable condition exists, DJI will repair your small off-road engine/equipment at no cost to you including diagnosis, parts and labor.
YOUR WARRANTY RIGHTS AND OBLIGATIONS
For EPA-only certified engine/equipment The United States Environmental Protection Agency and DJI Technology, Inc. (DJI), are pleased to explain the exhaust and evaporative emissions (“emissions”) control system warranty on your 2022/2023 small off-road engine/equipment. In the United States, new equipment that use small off-road engines must be designed, built, and equipped to meet the State’s stringent anti-smog standards. DJI must warrant the emissions control system on your small off-road engine/equipment for the period listed below provided there has been no abuse, neglect or improper maintenance of your small off-road engine/equipment leading to the failure of the emissions control system. Where a warrantable condition exists, DJI will repair your small off-road engine/equipment at no cost to you including diagnosis, parts and labor.
MANUFACTURER’S WARRANTY COVERAGE:
The exhaust and evaporative emissions control system on your small off road engine/equipment is warranted for two years. If any emissions-related part on your small off-road engine/equipment is defective, the part will be repaired or replaced by DJI.
OWNER’S WARRANTY RESPONSIBILITIES:
As the small off-road engine/equipment owner, you are responsible for the performance of the required maintenance listed in your owner’s manual. DJI recommends that you retain all receipts covering maintenance on your small off-road engine/equipment, but DJI cannot deny warranty coverage solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small off-road engine/equipment owner, you should however beaware that DJI may deny you warranty coverage if your small off-road engine/equipment or a part has failed due to abuse, neglect, or improper maintenance or unapproved modifications. You are responsible for presenting your small off-road engine/equipment to a DJI distribution center or service center as soon as the problem exists. The warranty repairs shall be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact DJI Technology, Inc. at +1 818-2350789 or support.agras@dji.com.
DEFECTS WARRANTY REQUIREMENTS:

• (a) T he warranty period begins on the date the small off-road engine/equipment is delivered to an ultimate purchaser.
• (b) General Emissions Warranty Coverage. DJI warrants to the ultimate purchaser and each subsequent owner that the engine or equipment is:

1. Designed, built, and equipped so as to conform with all applicable regulations adopted by the Air Resources Board; and
2. Free from defects in materials and workmanship that causes the failure of a warranted part for a period of two years.

• (c) The warranty on emission-related parts will be interpreted as follows:

1. Any warranted part that is not scheduled for replacement as required maintenance in the written instructions must be warranted for the warranty period defined in Subsection (b)(2). If any such part fails during the period of warranty coverage, it must be repaired or replaced by DJI according to Subsection (4) below. Any such part repaired or replaced under the warranty must be warranted for the remaining warranty period.
2. Any warranted part that is scheduled only for regular inspection in the written instructions must be warranted for the warranty period defined in Subsection (b)(2). A statement in such written instructions to the effect of “repair or replace as necessary” shall advise owners of the warranty coverage for emissions related parts. Replacement within the warranty period is covered by the warranty and will not reduce the period of warranty coverage. Any such part repaired or replaced under warranty must be warranted for the remaining warranty period.
3. Any warranted part that is scheduled for replacement as required maintenance in the written instructions must be warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part must be repaired or replaced by DJI according to Subsection (4) below. Any such part repaired or replaced under warranty must be warranted for the remainder of the period prior to the first scheduled replacement point for the part.
4. Repair or replacement of any warranted part under the warranty provisions must be performed at no charge to the owner at a warranty station.
5. Notwithstanding the provisions of Subsection (4) above, warranty services or repairs must be provided at distribution centers that are franchised to service the subject engine/equipment.
6. The owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, provided that such diagnostic work is performed at a warranty station.
7. DJI is liable for damages to other engine/equipment components proximately caused by a failure under warranty of any warranted part.
8. Throughout the emissions control system’s warranty period set out in subsection (b)(2), DJI must maintain a supply of warranted parts sufficient to meet the expected demand for such parts and must obtain additional parts if that supply is exhausted.
9. Manufacturer-approved replacement parts that do not increase the exhaust or evaporative emissions of the engine or emissions control system must be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the warranty obligations of DJI.
10. Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted add-on or modified parts will be grounds for disallowing a warranty claim. DJI will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.
11. DJI issuing the warranty shall provide any documents that describe that warranty procedures or policies within five working days of request by the Executive Officer.

• (d) Emission Warranty Parts List for Exhaust

1. Fuel Metering System.
2. Carburetor and internal parts (and/or pressure regulator or fuel injection system).
3. Air/fuel ratio feedback and control system.
4. old start enrichment system.
5. Air Induction System
6. Controlled hot air intake system.
7. Intake manifold.
8. Air filter.
9. Ignition System
10. park Plugs.
11. Fuel Tank
12. Fuel Cap
13. Fuel Lines (for liquid fuel and fuel vapors)
14. Fuel Line Fittings
15. Clamps*
16. Pressure Relief Valves*
17. Control Valves*
18. Control Solenoids*
19. Electronic Controls*
20. Vacuum Control Diaphragms*
21. Control Cables*
22. Control Linkages*
23. Purge Valves*
24. Gaskets*
25. Liquid/Vapor Separator
26. Carbon Canister
27. Canister Mounting Brackets
28. Carburetor Purge Port Connector

Note: As they relate to the evaporative emission control system. DJI will furnish with each new small off-road engine/equipment written instructions for the maintenance and use of the engine/equipment by the owner.

WE ARE HERE FOR YOU

• Contact

• DJI SUPPORT

• Facebook YouTube

• For the latest information on Agras products,

• scan the Facebook or YouTube QR code.

• Download the latest version from
  

• www.dji.com/t40/downloads
  

• If you have any questions about this document, please contact DJI by
  

• sending a message toDocSupport@dji.com
  

• and AGRAS are trademarks of DJI.
  

• Copyright © 2022 DJI All Rights Reserved.
  

• This content is subject to change.

Documents / Resources

| dji D12000iE Multifunctional Inverter Generator [pdf] User Guide
D12000iE, Multifunctional Inverter Generator, Inverter Generator, Multifunctional Generator, Generator, D12000iE Generator
---|---
| dji D12000iE Multifunctional Inverter Generator [pdf] User Guide
D12000iE Multifunctional Inverter Generator, D12000iE, Multifunctional Inverter Generator, Inverter Generator, Generator

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>