StarTech Com ICUSB232V2 USB to RS232 DB9 Serial Adapter Cable Instruction Manual

: June 9, 2024
: StarTech com

Table of Contents

Package contents
System requirements
Pinout
Installation
Verify the installation
FCC Compliance Statement
Warranty Information
Limitation of Liability
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

StarTech Com ICUSB232V2 USB to RS232 DB9 Serial Adapter Cable

Package contents

1 x USB to RS232 Adapter
1 x Instruction Manual

System requirements

Available USB port

Pinout

Pin 1	DCD
Pin 2	RXD
Pin 3	TXD
Pin 4	DTR
Pin 5	GND
Pin 6	DSR
Pin 7	RTS
Pin 8	CTS
Pin 9	RI

Installation

Windows

In a web browser, navigate to www.startech.com/ICUSB232V2.
Click the Support tab.
Under Driver(s), download the Prolific_PL2303.zip file.
When the file is downloaded, right-click the file and extract the contents.
Browse to the Windows folder and run the PL2303Prolific DriverInstaller application.
Follow the on-screen instructions to complete the installation.
Connect the USB to RS232 adapter to an available USB port.

Mac OS

In a web browser, navigate to www.startech.com/ICUSB232V2.
Click the Support tab.
Under Driver(s), download the Prolific_PL2303.zip file.
When the file is downloaded, right-click the file and extract the contents.
Browse to the Mac folder, and select the appropriate folder for the version of OS that you’re running.
Run the PL2303_x.dmg application, and follow the on-screen instructions to complete the installation.
Connect the USB to RS232 adapter to an available USB port.

Verify the installation

Windows

Navigate to Device Manager.
Expand the Ports (COM & LPT) section.
Confirm that Prolific USB-to-Serial Comm Port (COMx) appears in the list with no exclamation points or question marks.

Mac OS

Navigate to the System Profiler.
Expand the Hardware section, and click USB.
Confirm that USB-Serial Controller D appears in the list.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warranty Information

This product is backed by a three-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures