Better Music Builder DFS-910Pro 10 Inch 2-way Full Range Speaker Owner’s Manual

Better Music Builder DFS-910Pro 10 Inch 2-way Full Range Speaker

Better Music Builder® is a leader in the Audio and Karaoke equipment industry. We are committed to offering you high quality audio products. Unlike any others brand, we deliver the best cost and value to you directly. For the latest update information including operation manuals, installation instructions, hook-up diagram and other new technologies updates etc. please visit us at our website www.BetterMusicBuilder.com.

Dynamic Fusion Series is a high-end live sound system designed by the engineering team of Better Music Builder. This high-end series give you live music expe-rience, high power output and superior sound quality.

Thank you for purchasing this unit. To make full and effective use of this unit, please read this Owner’s Manual carefully before operating it. Please retain this manual for future reference. www.BetterMusicBuilder.com

INTRODUCTION

Dynamic Fusion Series are a line of high performance speakers introduced by Better Music Builder using Dynamic Fusion Technology™ (DFT). The series consist of the following models: DFS-206, DFS-306, DFS-406, DFS-506, DFS-804, DFS-810 Beta, DFS-812 Beta, DFS-908 G2, DFS-910 Pro, DFS-112 SUB 2.1 and DFS-115 SUB 2.1, DFS-12A. Dynamic Fusion Series are high performance speakers developed with the latest computer stimulation design technology and manufacturing technology. Utilizing unique LF extension technology, it performs with precise clarity and reliability. The LF unit is manufactured with waterproof non-linear fabric paper cone. The HF unit is manufactured with high temperature treated magnalium diaphragm, voice coil with copper cladding aluminum wire and compression cavity designed with linear phase technology. Magnetic circuit of tweeter generates high magnetic energy, low distortion and excellent ventilation function and high strength plywood absorbs the sympathy of noise for higher performance. The compact design of High Definition Speaker DFS-910 Pro can be easily mounted onto wall, ceiling and underneath the balcony. The versatility of these speakers and their attractive design are perfect for trendy spots such as karaoke bars, sports bars and night clubs. The Dynamic Fusion Series are each sold separately to your own customizable needs. Please visit our website www.bettermusicbuilder.com to learn more about our Dynamic Fusion Series and other products.

SYSTEM FEATURES

2-WAY FULL RANGE SPEAKER DFS-910 Pro

• 2-Way full range passive speaker
• 1 x 10” high power low frequency transducer
• 1 x 1.7” titanium diaphragm compression driver
• 1 x NL4 connector
• Dynamic Fusion Technology™ (DFT)
• High SPL and sensitivity
• 55~100° x 50° controlled coverage pattern
• Frequency response 70Hz~20kHz
• Sensitivity 94dB
• Computer stimulation design technology ensures good frequency response and excellent phase feature
• Multi purpose cabinet design for FOH or monitor use
• Integral 35mm pole mount receptacle for stand or vertical installation
• Combine with any Better Music Builder high power sub speaker for extended low frequency, high quality music reproduction Powder coated grill
• Independent crossover circuit provides low distortion and interferer
• Suitable for all kind of rock bar, entertainment bar, night club, all kinds of living performance and portability
• Flexible and easy-to install configurations (wall, ceiling, under balcony)

DFS-910 Pro PACKAGE CONTENTS:

• Speaker: 1 pc
• NL4 connector: 1 pc
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc

SAFETY INSTRUCTIONS

We will not notify you any errors or changes in this manual in advance. If there are any errors and changes in this manual, we will make the corrections in a timely manner. The corrections and changes will be on our website. Therefore, please visit our website at BetterMusicBuilder.com frequently to find out the most updated information, corrections on errors and changes in this manual. You may also contact us at toll free at 1-800-318-2218.

CAUTIONS FOR INSTALLATION

POWER SUPPLY / POWER CORD

• Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device.
• Use only the included power cord.
• Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where same could walk on, trip over, or roll anything over it.
• Remove the electric plug from the outlet when the device is not to be used for extended periods of time, and during electrical storms.
• When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

DO NOT OPEN

• Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Better Music Builder service personnel.

WATER WARNING

• Do not expose the device to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into an openings.
• Never insert or remove an electric plug with wet hands.

ABNORMALITY

• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Better Music Builder service personnel.
• If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric plug from the outlet, and have the device inspected by qualified Better Music Builder service personnel.

LOCATION

• Always consult qualified Better Music Builder service personnel if the device installation requires construction work, and make sure to observe the following precautions.
• Choose mounting hardware and an installation location that can support the weight of the device.
• Avoid locations that are exposed to constant vibration.
• Inspect the device periodically.
• When transporting or moving the device, always use two or more person. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the device in a confined, poorly-ventilated location. If this device is to be used in a small space other than an EIA-standard rack, make sure that there is adequate space between the device and surrounding walls or other devices: at least 30cm at the sides, 30cm behind and 30cm above. Inadequate ventilation can result in overheating, possibly causing damage to the device(s), or even catch fire.
• Do not use the speaker’s handles for suspended installation. Doing so can result in damage or injury.
• Do no expose the device to excessive dust, vibrations, extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not place the device in an unstable position where it might accidentally fall over.

CONNECTIONS

• Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

CAUTION

• When turning on the AC power in your audio system, always turn on the device LAST, to avoid speaker damage. When turning the power off, the device should be turned off FIRST for the same reason.

• Do not insert your fingers or hands in any gaps or openings on the device (ports, etc.).

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings on the device
  (ports, etc.). If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the device inspected by qualified Better Music Builder service personnel.

• Do not use the device for a long period of time at a high volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire.

• Do not rest your weight on the device or place heavy objects on it, and avoid using excessive force on the buttons, switches or connectors.

GETTING STARTED

WIRING

IMPORTANT: Make sure all equipments are turned off before making any connections. For speaker connections, use a high-quality speaker wire with polarity coding. The side of the wire with a ridge or other coding is usually considered positive polarity. NOTE If desired, consult Better Music Builder technical support for speaker wire and connection options.

The speakers have coded terminals that accept a variety or wire connectors. To ensure proper polarity, connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. Connect the – (black) terminals in a similar way. See the owner’s guides that were included with your amplifier, receiver and television to confirm connec-tion procedures.

IMPORTANT: Do not reverse polarities (i.e., + to – or – to +) when making connections. Doing so will cause poor imaging and diminished bass response.

ADJUSTING
Check the speakers for playback, first by setting the system volume control to a minimum level, and then by applying power to your audio system. Play a favorite music or video segment and increase the system volume control to a comfort-able level. NOTE You should hear balanced audio reproduction across the entire frequency spectrum. If not, check all wiring connec-tions or consult the authorized dealer from whom you purchased the system for more help. The amount of bass you hear and the stereo-image quality will be affected by a number of different factors, including the room’s size and shape, the construction materials used to build the room, the listener’s position relative to the speakers, and the position of the speakers in the room. Listen to a variety of music selections and note the bass level. If there is too much bass, move the speakers away from nearby walls. Conversely, if you place the speakers closer to the walls, there will be more bass output.

CARING
Each enclosure has a finish that does not require any routine maintenance. When needed, use a soft cloth to remove any fingerprints or dust from the enclosure or grille.

SYSTEM APPLICATIONS

SPEAKON Y CONNECTORS

Speakon Outputs

The upper Speakon jack has both Channel 1 and Channel 2 outputs, so it is especially useful for parallel, bi-amp, or BRIDGE mono operation. The other Speakon carries only Channel 2’s output. See the illustrations at above.

SPEAKON CONNECTORS

Source (INPUT) comes from the output source of the active/powered speaker while the bridge (OUTPUT) connects to the passive/non-powered speaker.

NOTE

• A speakon cable is required to connect the “OUTPUT” of the acive/powered speaker to the “INPUT” of the passive/non–powered speaker. Please order the speakon cable from our authorized dealers.

EXAMPLE OF SPEAKON CONNECTOR
There are two groups on the speakon connectors: Group 1 (+1, –1) and Group 2 (+2, –2) as indicated in the diagram. In order to use it, your speaker must have multi-functions (i.e. enable two sources of signal for input). If your speaker does not have multi-functions, it would not work with the Group 2 for connection. Please refer to the following diagram for connection.

Connector Panel

Connector Panel on Multi-Way Systems

Connector Panel on Subwoofers DYNAMIC FUSION SYSTEM – LARGE FORMAT

Dynamic Fusion Series are high-performance speakers developed with the latest technology and perform with precise clarity and reliability. The versatility of these speakers and their attractive design are perfect for trendy spots such  **** as karaoke bars, sports bars and night clubs. Because of their compact design, they can be easily mounted onto wall, ceiling and underneath the balcony.

SPEAKON

DYNAMIC FUSION SYSTEM – MEDIUM FORMAT

**DYNAMIC FUSION SYSTEM – SMALL FORMAT

**

CONTROLS AND FUNCTIONS

FRONT & REAR PANEL: 

1. COMPRESSION DRIVER WITH 1.7” TITANIUM DIAPHRAGM
2. 10-INCH WOOFER: PAPER CONE LOW-FREQUENCY DRIVER
3. RUBBER FEET
4. SPEAKER INPUT TERMINAL
5. 35MM SPEAKER STAND MOUNT

SYSTEM SETUP GUIDELINES

PLACING THE SPEAKERS ON THE FLOOR TO MONITOR SINGING
This speaker can be placed on the floor to perform the vocal monitoring function for live singing experience. It can also be used for business conference, coffee shop and church, etc.

NOTE

• When you use this speaker for the center or “monitor” the manufacturers has 4 plastic washers screws on the back of the speakers to prevent extreme shaking from recoil. You may use the speaker bracket to tightly install to the floor/ground, this will hold the speaker in place even with extremely loud music.

MOUNTING THE SPEAKERS TO THE CEILING
Integrated Suspension Points (Suspension Installations) For an area of 3,000 square feet or more, you can group up to six flying speakers together and suspend them into the ceiling for spot sound to cover a greater distance. To suspend the flying speakers onto the ceiling, you need the parts and accessories (optional) as indicated in the diagram below. To order these parts and accessories, please contact our authorized dealers directly.

NOTE

• We highly recommend you hiring a professional audio contractor to do the installation for safety purpose. The structure of the ceiling must be strong enough to hold at least 50 pounds.

PLACING THE SPEAKERS ON THE PORTABLE STAND
The speakers can be mounted onto the optional portable stand (see figure below). Make sure that the mounting system (hardware, stand, etc.) is capable of supporting four times the weight (approximately 25 lbs per speaker) of the speakers. Part Number: AMS001B (Optional).

NOTE

• Please do not stack two pieces of speakers onto the adjustable speaker stand. If you need two more speakers to increase the output volume, we recommend you to use a high power speaker instead of stacking two pieces of speaker on the adjustable speaker stand for safety purpose. You may also contact us at bettermusicbuilder.com for professional advice.

PLACING THE SPEAKERS ON THE SPEAKER MOUNTING POLE (Adjustable)

• Part Number: AM91 (Optional)

NOTE

• The speaker mounting pole as indicated in the diagram is not included with any of our speaker models. You may order it directly from our authorized dealers near you.

MOUNTING THE SPEAKER TO THE WALL

• STEP : Place the wall mount panel on the wall and put three or more screws to fasten it.
• STEP : Then, put the speaker firmly onto the mount. Adjust the speaker up and down for rotation at different angles to achieve the maximum sound effect.

NOTE The structure of the wall must be strong enough to hold up to 100 pounds.

NOTE

• We recommend that the speakers be tiled at an angle, so that it aims at audience’s ear level in order to achieve the best accoustic quality.

How to Adjust the Wall Mount (SL-001)
Adjust the wall mount left/right at 180 degree and up/down at 90 degree for rotation at different angles to achieve the best sound effect. Once you have set up the right position, then you can use the screw to tight it up. Part Number: SL-001 (Optional) for wall mount.

Dimensions: Wall Mount (SL-001)

Mounting to Solid Wood or Wood Studs
In North America, most of the houses have 2”x4” wood studs inside the panel walls. You may use stud finder to locate the wood studs. Then, you can drive the screw into the wood stud to mount the speaker bracket and hold it firmly .

PHYSICAL DIMENSIONS

(each)

SHIPPING WEIGHT| 44 Lbs / 20 Kg

(each)

DIMENSIONS (WXHXD)| 13×19.8×12.1 in

33×50.2×30.8 cm

PACKING DIMENSIONS (WXHXD)| 16.9×24.5×16.1 in

43×62.2×40.8 cm

(each)

SPECIFICATIONS

MODEL

|

DFS-910 Pro

TYPE| Front
POWER RATING|

400 Watts (RMS), 800 Watts (PEAK)

CABINET TYPE| High Intensity Plywood
SUPPORTED FIXTURE| Ceiling Mount, Wall Mount,

Floor Stand

WOOFER [LF]| 10” (1 unit)

“SPOT” RANGE

| compression driver with 1.7” titanium diaphragm
RATED IMPEDANCE| 8 ohm
FREQUENCY RESPONSE|

70Hz ~ 20kHz (-3dB)

SENSITIVITY| 94 dB (1m/1W)
CROSSOVER FREQUENCY|

1.8 kHz

DISPERSION| 55~100° x 50° (HxV)
DC IMPEDANCE| 5.6 Ohm
THD| <3%
INPUT CONNECTORS| NL4 x1,  +1 –1
HIGHLIGHTED FEATURES|

Dynamic Vocal Effect

FRONT VIEW

LEFT SIDE VIEW

BACK VIEW

TOP VIEW

BOTTOM VIEW

TROUBLESHOOTING

SYMPTOM: NO SOUND COMING OUT FROM THE SPEAKERS

Probable causes:

1. The A/C power of the speaker is turned off.
2. Wrong A/C power selection (i.e. 110V~ 220V).

Remedy:

• Turn on the A/C power of the speaker.
• Make sure the receiver or amplifier is on and the source is playing.
• Check all wires and connections between receivers, amplifiers and speakers. Make sure all wires are connected, none of the speaker wires are frayed, cut or punctured, and that no wires are touching each other.
• Review proper operation of your receiver or amplifier.
• Choose the right A/C power.

2. SYMPTOM: NO SOUND COMING OUT FROM ONLY ONE SPEAKER

Probable cause:
The A/C power of the speaker is turned off.

Remedy:

• A. Check the “Balance” control on your receiver or amplifier.
• B. Check all wires and connections between receiver, amplifier and speaker. Make sure all wires are connected, none of the speaker wires are frayed, cut or punctured, and that no wires are touching each other.
• C. In Dolby® Digital or DTS® mode, make sure that the receiver or processor is configured so that the speaker in question is enabled.
• D. Turn off all electronics and switch the speaker in question with another speaker that is working correctly. Turn everything back on, and determine whether the problem is in the same place: i.e., the speaker that was working previously now has no sound and the speaker that was not working now sounds fine. If the problem is in the same place, the source of the problem is most likely with your receiver or amplifier, and you should consult the owner’s manual for further information. If the problem is with the speaker, consult your dealer for further assistance, or visit our web site for technical support.

SYMPTOM: NOISE FROM THE SPEAKER. Probable cause:
The A/C power cord of the speaker is not grounded. Remedy: Change a new magnet cord of the A/C power cord.

SYMPTOM: MICROPHONE VOLUME IS TOO LOW.
Probable causes:

• A. The microphone is poorly connected to the speaker.
• B. The volume on the speaker is too low.

Remedy:

• A. Check the connection between the microphone and the speaker. Make sure that they are connected properly. Condense microphone doesn’t work with the speaker. You may need to change to a dynamic vocal microphone.
• B. Turn the volume to an appropriate level. If the volume is still not high enough, you may need to upgrade your existing audio system to a system with much higher output.

SYMPTOM: CRACKING NOISE FROM THE SPEAKER.

Probable cause:
The tweeter may be burned out.

Remedy:

• Replace with a new tweeter.
• Note: we recommend hiring a professional to change a tweeter in order to do it properly.

SYMPTOM: SOUNDS LIKE DAZZ, DAZZ, DAZZ COMING FROM THE SPEAKER.

Probable cause:
The speaker cable (with small gauges) is over 100 feet.

Remedy: Change to a higher quality cable preferably 12 and 14 gauges.

SYMPTOM: TOO MUCH MICROPHONE FEEDBACK FROM THE SPEAKER.

Probable cause:
Incorrect tremble and bass adjustments on the speaker.

Remedy:
Adjust the tremble and bass to an appropriate level to avoid microphone feedback.

SYMPTOM: NO SOUND FROM THE MAIN SPEAKERS

Probable cause:
Speaker connectors are not connected properly.

Remedy:
Please make sure that the speaker connectors are locked tight. Please also note that there are two groups of speakon connectors (i.e. Group 1 +1, –1, Group 2 +2, –2). Make sure that your speakers have the multifunction that enables the connection to Group 2 for different signal inputs. The basic connection is on Group 1 (+1, –1).

SYMPTOM: SOMETIMES THE SPEAKERS HAVE NO SOUND.

Probable cause:
When the master volume reaches the maximum level, the speaker automatically shuts down because this speaker has a built-in auto circuit to protect itself when the master volume becomes too high.

Remedy:
Change to a higher power amplifier to work with the speakers. Please make sure the output power of the amplifier can match that of the speakers. Another option is to add more speakers or subwoofers for higher output as below.

1. Add one more loudspeaker.
2. Add one more powered subwoofer.

We highly recommend hiring an audio professional for advise on the right engineering for the amplifier and speakers.

FINAL WORDS TO USER

The engineering team of Better Music Builder has many years of experience in audio equipment design. The team constantly develops new audio technologies, designs innovative audio and karaoke equipment to suit your specific needs and provides you great ideas for home entertainment. Our engineering team also designs audio equipment for commercial use by restaurants, coffee shops, churches, and school auditoriums, etc. If the commercial area for audio equipment installation exceeds 2,000 square feet, we highly recommend hiring audio professionals to handle the installation in order to avoid risks in breaking the equipment with improper installation and safety protection purposes. We also provide educational and technical information on audio equipment and technologies. For example, we provide free installation diagrams to make it easier to connect the system. In addition, to get best connections for the sharpest image and sound quality, we provide hot tips for choosing the high quality type of A/V cable connections. Free information on audio equipment and technologies available for download from our website, www.BetterMusicBuilder.com.

Please do not remove the “Yellow Label” on the rear of the machine; otherwise, the warranty will be void automatically. We design it to protect your own safety. If repair and maintenance service is needed, please contact us directly or hire a professional technician. To learn more about the technical aspects, visit our website www.BetterMusicBuilder.com  and download the relevant information for review. Before hooking up the system, turn off the power on all machines including audio/video equipment and TV. Otherwise, it may damage the equipment, especially on the HDTV in which a spot might appeared on the TV screen. After hooking up the system, double check the audio/video connections to ensure that they are connected correctly.

NOTE

• Sometimes, loose or poor quality cable would affect the microphone effects, picture quality, or even cause the machine to shut down suddenly. Again, thank you for choosing Better Music Builder. We hope you can make the best use of the machine and enjoy it for years to come. If you have any questions regarding our product, please feel free to contact us at www.BetterMusicBuilder.com.

WARRANTY

ONE-YEAR LIMITED WARRANTY FOR HOME USE EQUIPMENT
Our one-year warranty covers both parts and labors. The warranty becomes effective from the date of your purchase for one year. Our warranty only covers defects due to product defectiveness with free of defects in materials or workmanship. However, our warranty does not cover defects due to normal wears, damage in transit, improper use, abuse or failure to follow the proper instructions for maintenance. This warranty is void in the event of unauthorized repairs, alternations, modifications and removing of the product label. Please also note that our warranty does not cover any shipping cost for the return of defective products to us for inspection, repair and maintenance. Our warranty for Better Music Builder products can only be executed in North America.

90-DAY LIMITED WARRANTY FOR PUBLIC AND COMMERCIAL USE EQUIPMENT
Our 90-day warranty applies to speakers, amplifiers, mixers and microphones for both public and commercial use such as restaurant, coffee shop, KTV nightclub, church and school, etc. It covers both parts and labors. The warranty becomes effective from the date of your purchase for 90 days. Our warranty only covers defects due to product defectiveness with free of defects in materials or workmanship. However, our warranty does not cover defects due to normal wears, damage in transit, improper use, abuse or failure to follow the proper instructions for maintenance. This warranty is void in the event of unauthorized repairs, alternations, modifications and removing of the product label. Please also note that our warranty does not cover any shipping cost for the return of defective products to us for inspection, repair and maintenance. Our warranty for Better Music Builder products can only be executed in North America.

ADDITIONAL NOTES

1. Limited warranty for home use equipment is only valid in North America.
2. Limited warranty is valid only if you purchase our products from our authorized dealers (including both regular retailers and online retailers) in North America. If you choose to purchase our products from an authorized dealer, we will not provide any limited product warranty for you. To protect your limited product warranty, please purchase our products from one of our authorized dealers in North America near you.
3. Limited warranty is automatically void if the yellow label stating “No Warranty After Opening” is removed from the product.

TO REGISTER YOUR WARRANTY
Please fill out the warranty card that came with your unit, download or submit online warranty form. However, we need the invoice for your purchase in order to process this warranty. You may also register your warranty online. Please visit our website at www.bettermusicbuilder.com.

AGENCY REGULATORY NOTICES

FEDERAL COMMUNICATIONS COMMISSION NOTICE
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.

Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not approved may void the user’s authority to operate the equipment.

Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC rules and regulations.

MATERIALS DISPOSAL
Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance (EIA) (http://www.eiae.org).

DISPOSAL OF WASTE EQUIPMENT BY USERS IN PRIVATE HOUSEHOLDS IN THE EUROPEAN UNION
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product .

JAPANESE MATERIAL CONTENT DECLARATION
A Japanese regulatory requirement, defined by Specification JIS-C-0950, 2005, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006.

RECYCLING PROGRAM
The terms and availability of these programs vary by geography because of differences in regulatory requirements and local customer demand.

CONTACT INFORMATION

MAILING ADDRESS

• BET TER MUSIC BUILDER 29400 Kohoutek Way #150 Union Cit y, CA 94587 U.S.A.

TELEPHONE NUMBERS

• USA Region USA Toll Free: 1-800 -318-2218 Sales & Marketing: 510 -477-9955 Customer Ser vice: 510 -477-9955

FAX NUMBERS

• USA Region Sales & Marketing: 510 -477-9922 Customer Ser vice: 510 -477-9922

WORLD WIDE WEB

• E-mail: sales@bettermusicbuilder.com
• Website: www.bettermusicbuilder.com

MAINTENANCE

With proper maintenance and regular service, it would maintain the machine quality and prolong its life. We recommend you to print the following information clearly for future reference on maintenance and warranty.

• MODEL#
• DATE PURCHASD (MM/DD/YYYY)
• DEALER NAME
• CITY
• ST./PROV.
• ZIP/P.C.
• DEALER WEBSITE http://www
• INVOICE #
• DEALER PHONE #
• DEALER E-MAIL

Passionate about Music
Thank you for purchasing this unit. To make full and effective use of this unit, please read this Owner’s Manual carefully before operating it. Please retain this manual for future reference.

• Comments E-mail to sales@bettermusicbuilder.com
• Copyright © 2022 Better Music Builder. All rights reserved. Legal trademark.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>