MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones Owner’s Manual

June 2, 2024
MEZE Audio

MEZE 99 CLASSICS
PERFECT NATURAL SOUND

99 CLASSICS Walnut Gold Wood Headphones

Microphone and Remote Control unit:

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones

Compatible with both Android and Apple devices+ everything that has jack connector
MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones -
FigThe 99 Classics headphones are symmetrical.
So Left and Right is determined by the Lor R marked cable that you are using.
Also: the L (left) cable jack has a small tactile ridge to help you identify the left side of cable I headphones without looking.

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
1

Earcups: Real Wood
Transducer Type: Dynamic Neodymium I Mylar Transducer size: 40mm
Frequency response: 15 Hz -25 KHz
Sensitivity: 1 03 Db 1 kHz/1 mW
Impedance: 32 Ohm
Rated input power: 30mW
Maximum input power: 50mW
Cable: 1 .2m Kevlar OFC with remote
Cable: 3m OFC
Adapter: 6.3mm gold-plated jack
Adapter: Airplane jack
Case: Hard EVA carrying pouch
Weight: 290g
You tend to crank up the volume to compensate for the noise around you. But our earpads offer a good passive isolation which should allow you to listen to your headphones comfortably even in louder environments such as inside an airplane or subway.
This way we hope to contribute to the preservation of your hearing.
FOR YOUR SAFETY: Maximum Recommended Sound Level I Day:

level time equivalent to
90dB 8 Hours hair dryer
95dB 4 Hours power mower
100d8 2 Hours tractor
105d8 1 Hour chain saw
110dB 30 Minutes rock concert
115dB 15 Minutes jackhammer
120d8 Dangerous ambulance

WARRANTY: Meze headphones guarantees their products against defects in materials or workmanship for a period of one (1) year from the date of purchase from a Meze headphones authorized dealer. Meze headphones will repair or replace the product or parts at no charge. After one (1) year, you are responsible for the repair, replacement part or replacement. This warranty does not cover other related costs.
This warranty does not cover cosmetic damage, acts of god, normal wear and tear, accidents, misuse, commercial use, any modifications to the product, improper use or improper connection. Additionally it doesn’t cover purchase from an unauthorized dealer, attempted repair by anyone other than Meze headphones or other authorized person or unit. This warranty does not cover products sold by unauthorized resellers, products sold as-is, open box, second hand, display models, or any other times in which the product may have been opened or used. This warranty is also void if the product was damaged by a product that it was used with such as battery leak or electrical fault of a connecting product. In order for warranty to apply a proof of purchase is required. A proof of purchase may be in the form of a receipt, bill of sale, transaction code with the model of the product and the date of purchase listed from an authorized dealer.
Meze headphones is not responsible for replacement or repair of products if in violation of this warranty. Some countries may have other restrictions on warranties.
RETURNS: In the event that you need warranty service on your earphones, earbuds or headphones or you are not satisfied with your purchase, please contact the Meze authorized dealer you made the purchase from or Meze headphones through the contact form on the website in case you purchased the item on the Meze headphones website. We are not responsible for items returned without previously contacting Meze headphones.

REFUND POLICY: Products purchased from our website can be returned within 30 days of purchase date. The package must be unopened and without any visible damage. To be eligible for a refund from Meze headphones the product must have been purchased directly from Meze headphones. If your product was purchased from other retailers you must contact that specific retailer. Refunds will be subject to a 15-20% restocking fee. The customer is also responsible to pay for shipping to return the merchandise.
If the product you received is defective from Meze headphones or when purchased through any other authorized dealer; you may request an exchange under our warranty policy. Besides all the above, Meze headphones wishes for all customers to be happy with their purchase and will do its best to make that happen.

You have purchased a genuine Meze product.
This object has been designed and lovingly crafted under close quality control.
The uniqueness of the wood pattern ensures that no two headphones are alike and you are the owner of a one of a kind item.
Mete guarantees the originality and quality of it’s products.
Thank You
Antonio Meze
-chief designer –
This item has been carefully inspected

Thank you for purchasing the CAN Signature from ZEN series. The CAN Signature MZ99 is a balanced headphone amplifier optimized for Meze headphones.

  1. Power switch

  2. Input channel switch
    Input 1: RCA
    Input 2: Single-ended 3.5mm
    Input 3: Balanced 4.4mm

  3. PowerMatch selection: OdB/6dB/12dB/18dB
    We recommend starting from 0dB and then increasing the switchable gain level to attain an enjoyable and comfortable level of volume from the headphones.
    Warning: at the outset do not use excessive gain, otherwise damage to hearing or connected headphones may ensue. AMR/iFi audio is not responsible for any damage/injury from misuse.

  4. Analogue Volume Control
    At normal listening levels, the volume control should be around the 12 o’clock position. Increase the gain level to enjoy a higher listening level.

  5. Single-ended 6.3mm output
    For connecting single-ended 6.3mm headphones With single-ended 3.5mm headphones connect with a 3.5mm to 6.3mm adapter.

  6. Balanced 4.4mm analogue output
    For connecting balanced 4.4mm headphones.
    Tip: As the Meze headphones use balanced design, we recommend the 4.4mm balanced output.

  7. MZ99 LED
    Headphone corrections optimized for Meze headphones.

  8. XSpace Matrix LED
    The XSpace Matrix(on/off) recreates a holographic sound field. It is a pure analogue signal processing circuit designed for listening to headphones as if one was listening to speakers. This addresses the ‘music inside the head’ sensation, which makes for unsettling listening. Tip: Sonically-hindering DSP is NOT used for Meze headphones nor XSpace Matrix systems. They use the highest-quality discrete components and operate purely in the analogue domain. Hence all the clarity and resolution of the original musk is retained

  9. Settings
    This button chooses between:
    – Off
    – MZ99
    – XSpace
    MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
2

  10. Balanced 4.4mm analogue input
    This is a balanced analogue input.

  11. Single-ended 3.5mm analogue input
    For connecting single-ended 3.5mm input.

  12. RCA analogue input
    This is an analogue input.

  13. Balanced 4.4mm analogue output
    This is an analogue output via 4.4mm > XLR or other balanced interconnects. You could use this for an active speaker.
    Tip: As the ZEN CAN Signature MZ99 is balanced, this is the recommended output.

  14. DC 5V power
    Please connect the ZEN CAN Signature MZ99 to the enclosed power supply, the super-silent iPower2.The ZEN CAN Signature MZ99 must ONLY be powered by 5 volts.

Specifications

Input voltage:| DC 5V/2.5A
Max Output: Balanced:
S-E:| >15.1V/385 mW (@ 600 Ohm) >11.0V/1890 mW (@ 64 Ohm) >6.2V/1200 mW (@ 32 Ohm) >7.6V/98 mW (@ 600 Ohm) >7.4V/870 mW (@ 64 Ohm) >7.2V/1600 mW (@ 320hm)
THD &N: Balanced:
S-E:| <0.006% (@ 360 mW/2.4V 16 Ohm) <0.005%(@ 100 mW/1.27V 16 Ohm)
SNR:
Balanced: S-E:| >121dBA (@ 15.2V) >120dBA (@ 7.6V)
Max. Input: Balanced:
RCA:
3.5mm:| 7.4V RMS
3.8V RMS
1.92V RMS
Gain:
Frequency Response: Power consumption:| OdB, 6dB, 12dB and 18dB 10Hz – 200kHz (-3dB)
No Signal —5W
Max Signal —12W
Dimensions:| 158 x 117 x 35 mm
6.2″ x 4.6″ x 1.4″
Net weight:| 550 g (1.21 1 bs)
Warranty period:| 12 months

Specifications are subject to change without notice.

ZENCAN
Signature
MZ99
Connection Guide

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones -
Fig4

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones -
Fig53 Tech Lowdown

Special By Design

  • ActivEQ is an exact match for Meze 99 Classic headphones
  • End-to-end True Differential balanced circuitry
  • Premium parts selection drawn from the £3,000 Pro range

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones -
Fig4

Features

  • Adjustable gain to match other headphones
  • XSpace analogue headphone
  • 4.4mm balanced output

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
6

ActivEQ

The Meze 99 Classic headphones

  • Offers exceptional tonality
  • Delivers outstanding dynamic expression

ZEN CAN Signature MZ99

  • Adjusts the treble for more vivaciousness
  • Enhances the mid-low bass to extract the last drop of sonic goodness

vMEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
7

ActivEQ

  • EQ curve precisely matched
  • Active and passive components
  • Performed in the analogue domain
  • Unmatched noise reduction
  • SNR and distortion are unaffected
    ActivEQ can be switched off to use with other headphones.

Frequency Response 20HZz to 20 KHz

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
8

Headphones Compatibility List AUDIO
Meze 99 Classics
Meze 99 Neo
Meze 99 by Drop
ZEN CAN Signature MZ99 + Meze 99 Headphones
Meze 99 Headphones

Pro Series High-End Circuit Design

  • Class A output stage from the Pro range
  • Drives 15V / 385mW @ 600 Ohm
  •  <0.006% distortion

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
8

Superior Design and Components

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
10

  • XSpace – analogue headphone spatialiser.
  • This opens up your music to give you the spaciousness of a live-concert atmosphere.

MEZE Audio 99 CLASSICS Walnut Gold Wood Headphones - Fig
11

Specifications

Input Voltage 5V/2.5A
**** Max Output ****

Balanced

| >15.1V/385 mW (@ 600 Ohm)

11.0V/1890 mW (@ 64 Ohm)
6.2V/1200 mW (@ 32 Ohm)
**** Single-Ended| >7.6V/98mW (@ 600 Ohm)
7.4V/870 mW (@ 64 Ohm)
7.2V/1600 mW (@ 32 Ohm)
THD&N| Balanced| <0.006% (@ 360 mW/2.4V 16 Ohm)
Single-Ended| <0.005% (@ 100 mW/1.27V 16 Ohm)
SNR| Balanced| >121dBA (@ 15.2V )
Single-Ended| >120dBA (@ 7.6V )
Max Output| Balanced| 7.4V RMS
---|---|---
RCA| 3.8V RMS
3.5mm| 1.92V RMS
Gain| 0dB, 6dB, 12dB and 18dB
Frequency Response| ****

10Hz – 200kHz (-3dB)

Power consumption| No Signal ~5W
Max Signal ~12W
Dimensions| 158 x 117 x 35 mm
6.2″ x 4.6″ x 1.4″
**** Net weight| 550 g
1.21 lbs
Line Section

Outputs| Balanced| 6.7V max. (variable)
UnBAL| 3.5V max. (variable)
Output Impedance| Balanced| ≤200Ω
UnBAL| ≤100Ω
SNR| Balanced| <110dB(A) @ 0dBFS
UnBAL| <110dB(A) @ 0dBFS
**** THD+N| Balanced| <0.007% @ 0dBFS
UnBAL| <0.015% @ 0dBFS
Headphone Section

Outputs| Balanced| 6.7V max. @ 600 Ω
UnBAL| 3.5V max. @ 600Ω
Output Power| Balanced| >1000mW @ 32Ω;

74mW @ 600Ω

UnBAL| >320mW @ 32Ω;

40mW @ 300Ω

Output Impedance| Balanced| <1Ω
UnBAL| <1Ω
**** SNR| Balanced| <116dB(A) @ 0dBFS
UnBAL| <115dB(A) @ 0dBFS
THD+N| <0.005% (1V @ 16Ω)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals