MEZE AUDIO Meze 99 Classics Wireless Headset User Manual

MEZE AUDIO Meze 99 Classics Wireless Headset User Manual

SAFETY INSTRUCTIONS

• Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents and choking hazards.

• With wired headphones you should avoid sharp movements, which could cause the headphones to fall off your head. You could be seriously injured especially if you are wearing pierced earrings, spectacles etc.

• Do not use the product in situations which require special attention (e.g. in traffic or when performing skilled jobs).

• Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.

• As with any equipment which will be used in close proximity to sensitive areas of the body, it is essential that the ear pads and headband are kept clean.
  Use a dry cloth for cleaning. Should it become necessary to replace the ear pads, refer to graphic on the other side.

• When connecting to your music source, make sure that the volume is turend down before plugging in the headphones. Due to their low impedance, the 99 Classics can be driven to high volumes by most devices with a 3.5mm audio jack. Do not set the volume too high, as you could pemanently damage your hearing.

You tend to crank up the volume to compensate for the noise around you.
But our earpads offer a good passive isolation which should allow you to listen to your headphones comfortably even in louder environments such as inside an airplane or subway.

This way we hope to contribute to the preservation of your hearing.

FOR YOUR SAFETY: Maximum Recommended Sound Level / Day:

PACKAGE CONTENTS

1. Meze 99 CLASSICS headphone
2. EVA carry case
3. Accessories pouch
4. 1.2m OFC cable with mic&remote
5. 3m OFC cable
6. 6.3mm jack adapter
7. Airplane adapter

REPLACING THE EARPADS

To remove the earpads, gently pull them away from the enclosure, until you see the black rubber lip surrounding the PU leather earpad peel off the side of the earcup.

To fit the earpad back on, place the before mentioned rubber lip of the earpad into the ridge between the wood earcup and the driver-plate. Start from one side, and slowly make your way all around, by carefully pulling the earpad outwards.

SELF-ADJUSTING HEAD BAND

The Meze 99 Classics doesn’t require manual adjustment for the size of the headband.
The elastic mechanism inside the PU leather headband can stretch to fit any head size without any user input.

MICROPHONE AND REMOTE CONTROL UNIT

Compatible with both Android and Apple devices + all devices with audio jack output.

When connected to a high-quality music player, notebook, tablet or smartphone, the Meze 99 Classics will develop it’s full potential

The 99 Classics headphones are symmetrical So Left and Right is determined by the L or R marked cable that you are using.
Also: the L (left) cable jack has a small tactile ridge to help you identify the left side of cable / headphones without looking.

Specifications

Earcups: Real Wood Enclosure
Transducer Type: Dynamic Neodymium / Mylar
Transducer Size: 40mm
Frequency Response: 15 Hz – 25 Khz
Sensitivity: 103 dB 1khz/1mw
Impedance: 32 Ohm
Rated Input Power: 30mw
Maximum Input Power: 50mw
Weight: 290g

WARRANTY

Meze Audio guarantees their products against defects in materials or workmanship for a period of one (1) year from the date of purchase from a Meze Audio authorized dealer. Meze Audio will repair or replace the product or parts at no charge. After one (1) year, you are responsible for the repair, part replacement or headphone replacement. This warranty does not cover other related costs.

This warranty does not cover cosmetic damage, acts of god, normal wear and tear, accidents, misuse, commercial use, any modifications to the product, improper use or improper connection. Additionally, it doesn’t cover purchase from an unauthorized dealer, attempted repair by anyone other than Meze Audio or other authorized person or unit.

This warranty does not cover products sold by unauthorized resellers, products sold as-is, open box, second hand, display models, or any other times in which the product may have been opened or used.

This warranty is also void if the product was damaged by a product that it was used with such as battery leak or electrical fault of a connecting product.

In order for warranty to apply a proof of purchase is required. A proof of purchase may be in the form of a receipt, bill of sale, transaction code with the model of the product and the date of purchase listed from an authorized dealer.

Meze Audio is not responsible for the replacement or repair of products if in violation of this warranty. Some countries may have other restrictions on warranties.

RETURNS

In the event that you need warranty service on your earphones, earbuds or headphones or you are not satisfied with your purchase, please contact the Meze authorized dealer you made the purchase from or Meze Audio through the contact form on the website in case you purchased the item on the Meze Audio website. We are not responsible for items returned without previously contacting Meze Audio.

REFUND POLICY

Products purchased from our website can be returned within 30 days of purchase date. Item must be in functional condition and not damaged by the customer. The package and item must be without any visible damage, and complete with all accessories. To be eligible for a refund from Meze Audio the product must have been purchased directly from Meze Audio. If your product was purchased from other retailers you must contact that specific retailer.

The customer is also responsible to pay for shipping to return the merchandise. If the product you received is defective from Meze Audio or when purchased through any other authorized dealer; you may request an exchange under our warranty policy.

This product complies with Electromagnetic Compatibility (2004/108/EC) directive when used and installed according to this instruction manual.

Correct Disposal of This Product. (Waste Electrical & Electronic Equipment) Applicable in the European Union and other Eurpean countries with separate collection systems.

This marking on the product, accesories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of household waste and recycle them responsibly to promote the sustainable reuse of material resources.

You have purchased a genuine Meze product.

The uniqueness of the wood pattern ensures that no two headphones are alike and you are the owner of a one of a kind item.

Meze guarantees the originality and quality of its products.

Thank You
Antonio Meze
– chief designer –

Burn-in is the process for exercising new audio equipment.

Meze headphones require at least 40 hours of burn-in time to reach their optimal performing state.

The main purpose of the burn-in process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Most audiophiles agree that the sound quality will be noticeably improved after burn-in.

Please visit mezeaudio.com/pages/burnin for more information

Meze Audio
Independentei 12, 430071, Baia Mare , Romania
support@mezeaudio.com
www.mezeaudio.com / www.mezeaudio.eu

References

• Meze Audio - Sound. Comfort. Design. True high-end.
• Meze Audio - Sound. Comfort. Design. True high-end.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>