YSI MJK Ball Float TO IQ Sensornet Sensors Instructions
- June 2, 2024
- YSI
Table of Contents
MJK Ball Float TO IQ Sensornet Sensors
Instructions
MJK Ball Float TO IQ Sensornet Sensors
Technical Instructions
XA00247
MJK Ball Float Instructions
HOW TO CONNECT THE MJK BALL FLOAT TO IQ SENSORNET SENSORS
Safety Precautions
** Follow all safety guidelines and instructions printed on the label when
using PVC glue compound. Use appropriate PPE when operating power tools and
handling corrosive materials.
Scope of Delivery
**
Item #s | Description |
---|---|
MJK155256 | Ball float for process sensors, w/o weight, ISO threaded |
MJK155265 | PVC coupler 50mmx 40mm x 1 1/4”, ISO threaded |
MJK155266 | 45° PVC fitting, 50mm |
MJK155268 | PVC Cap, 50mm w. PG9 cable glands, ISO threaded |
MJK155252 | SuSix® adapter for ball float, ISO threaded |
Materials Required
- IQ SensorNet sensor (only works with standard 40 mm sensors)
- IQ SensorNet sensor cable
- PVC Piping 2″ diameter
- PVC glue
- Oscillator or another tool to cut PVC piping.
Instructions
1. Start by notching a hole on the end of the 2″ PVC piping. The Notch should
be 2″ long and 0.5″ wide. This notch will be where the IQ SensorNet cable
comes out of the PVC pipe. Set the PVC pipe aside for later.
2. Unscrew the threaded cover on the IQ SensorNet sensor cable by rotating
the cover counter clockwise. Set the cover aside.
3. Thread the IQ SensorNet cable through the Susix® adapter (MJK155252),
making sure that the female end is facing the IQ SensorNet Cable Connection.
4. Screw the Susix® adapter on the IQ SensorNet cable by rotating
the adapter clockwise.
5. Thread the IQ SensorNet cable through the ball float (MJK155256), making
sure that the female end is facing the IQ SensorNet Cable Connection.
6. Screw the ball float onto the Susix® adapter by rotating the
ball float clockwise.
7. Thread the IQ SensorNet cable through the PVC coupler (MJK155265), making
sure the threaded side is facing the ball float.
8. Screw the PVC coupler onto the ball float by rotating the ball
float clockwise.
9. Thread the IQ SensorNet cable through the 45° PVC fitting (MJK155266).
10. Using PVC glue, glue the 45° PVC fitting onto the PVC coupler.
Allow the PVC glue compound to setup before proceeding to the next step
11. Thread the IQ SensorNet cable through the 2″ PVC piping. Make sure that
the notched end of the PVC pipe is facing the controller or mounting.
12. Using PVC glue, glue the 2″ PVC piping onto the 45° PVC
fitting. Allow the PVC glue compound to setup before proceeding to the next
step.
13. Pull the IQ SensorNet cable into the Notch on the end of PVC Pipe.
14. Using PVC glue, glue the PVC cap (MJK155268) onto the end 2″ PVC piping.
Allow the PVC glue compound to setup before proceeding to the next step.
15. The completes the assembly of the MJK ball float mount.
YSI, a Xylem brand
1725 Brannum Lane
Yellow Springs, OH 45387
© 2022 Xylem, Inc. XA00247 0522
+1.937.767.7241
info@ysi.com
YSI.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>