YSI 610214 Power Pack For ProSwap Logger User Guide
- June 6, 2024
- YSI
Table of Contents
610214 Power Pack For ProSwap Logger
Quick Start Guide
Item #610214
This is a reference guide for setting up the ProSwap Logger Power Pack. The Power Pack provides power to the ProSwap Logger using six AA alkaline batteries.
Setting Up
-
The PowerPack cover utilizes captive screws. Use a Phillips head screwdriver to loosen the 4 screws and remove the cover to access the battery compartment.
-
Install 6 AA alkaline batteries in the battery compartment.
-
Connect the ProSwap Logger cable to the MS-8 connector.
Use the magnet tool to activate the Battery Level Indicator and check the battery level.
• 100% charge— 4 Solid LED’s
• 75% charge— 3 Solid LED’s
• 50% charge— 2 Solid LED’s
• 25% charge— 1 Solid LED
• 0% charge— No Solid LED’s (4 Flash)
-
Reinstall the Power Pack cover.
a xylem brand
1725 Brannum Lane Yellow Springs,
OH 45387 800-765-4974, (937) 767-724
info@ysi.com
Item# 610214 Dwg# 610214March 2021 Rev B
YSI.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>