Shenzhenmizongniaohuwaiyongpingyouxiangongsi NVG10 Night Vision Goggles Monocular 6x Zoom Helmet Hunting User Manual
- June 17, 2024
- Shenzhenmizongniaohuwaiyongpingyouxiangongsi
Table of Contents
Shenzhenmizongniaohuwaiyongpingyouxiangongsi NVG10 Night Vision Goggles
Monocular 6x Zoom Helmet Hunting
Product Usage Instructions
Safety Precautions
Please read and follow these safety precautions before using the product:
- Keep the product away from water and other liquids.
- Avoid using the product near flammable materials.
- Do not expose the product to extreme temperatures.
- Only use the provided power source or compatible alternatives.
- Do not disassemble or modify the product.
- Keep the product out of reach of children.
Product Setup
Follow these steps to set up the product:
- Place the product on a stable surface.
- Connect the power source to the product.
- Turn on the product using the power button.
- Follow any additional setup instructions provided in the user manual.
Product Operation
To use the product, follow these instructions:
- Ensure the product is powered on.
- Refer to the user manual for specific functions and features.
- Use the provided controls or interface to navigate and adjust settings.
- If applicable, connect any external devices according to the user manual.
- Follow any specific usage guidelines provided in the user manual.
Maintenance and Cleaning
To maintain and clean the product, please follow these guidelines:
- Turn off and unplug the product before cleaning.
- Use a soft, dry cloth to wipe the exterior surface.
- Avoid using harsh chemicals or abrasive materials.
- Refer to the user manual for any specific cleaning instructions.
Troubleshooting
If you encounter any issues with the product, try the following
troubleshooting steps:
- Check if the power source is properly connected.
- Restart the product by turning it off and on again.
- Refer to the user manual for troubleshooting tips and error codes.
- If the issue persists, contact our customer support for further assistance.
Frequently Asked Questions (FAQ)
Q: How do I reset the product to factory settings?
A: To reset the product to factory settings, follow these steps:
- Access the settings menu on the product.
- Navigate to the “Reset” or “Restore” option.
- Confirm the reset action and wait for the product to restart.
Q: Can I use the product with batteries?
A: No, the product does not support battery operation. Please use the provided
power source.
Q: Is there a warranty for the product?
A: Yes, the product comes with a [Warranty Period] warranty. Please refer to
the user manual for more details.
Q: How can I update the product’s firmware?
A: To update the product’s firmware, follow these steps:
- Check if there is a firmware update available on the manufacturer’s website.
- Download the firmware update file onto a USB drive.
- Connect the USB drive to the product’s USB port.
- Access the settings menu on the product and navigate to the “Firmware Update” option.
- Select the firmware update file from the USB drive and follow the on-screen instructions to complete the update.
FCC Caution
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to the user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>