ATandT IWC50 3 in 1 Wireless Charging Dock with Alarm Clock User Guide

ATandT IWC50 3 in 1 Wireless Charging Dock with Alarm Clock

Welcome
Thank you for buying
AT&T IWC50!
Please read this quick start guide before using the device to ensure safe and proper use.

Features

• Designed to charge smartphones and other accessories with Qi® technology.
• Rapid charge your Qi-enabled devices with the included Type-C cable and QC 3.0 adapter.
• Supports up to 15W for phone charging , 2.5W for watch , 4W for earbuds.
• A time display screen, which can display time and alarm time.
• Built-in over-charging, over-heating, short-circuit protection, and foreign object detection to protect your devices.
• Detachable Charging Pad is easy to carry and perfect for traveling.

Device compatibility
Compatible with iPhone® 13/12/12 Mini / 12 Pro / 12 Pro Max / SE 2020/11/11 Pro / 11 Pro Max / XR / XS / XS Max / X / 8 / 8Plus, iWatch 7/6/SE/5/4/3/2/1 and Airpods Pro/1/2/3 Samsung Galaxy S20 / S10 / Huawei phones and all Qi- enabled phones.

What’s included

Product Appearance

1. Magnetic wireless watch charging area
2. Earbuds charging connector
3. Smartwatch indicator light
4. Alarm clock
5. Clock
6. Smartphone indicator light
7. Phone charging area
8. Alarm clock button
9. Setting
10. Alarm clock timer/ Clock time I + I
11. Alarm clock timer/ Clock time I – I
12. USB A output port
13. Type-C input port

Operating Steps

1. Connect the included Type C cable to an adapter or a QC 3.0 or PD adapter for fast charging (QC 3.0 adapter not included) to power the unit.
2. Place smartphone on phone charging area to begin charging.
3. Place smartwatch on side wing to charge (minimize watch band to allow a better fit on side wing while charging).
4. Plug your earphone case in the connector to charge.
   Ensure the AirPods®, or the AirDots® case is facing forward. Note: You need to use a QC 3.0 or PD charger to enable rapid charging.
   Apple® devices charge at Max 7.5 Watts.

Clock Function

The time display is in 24-hour system, each blink of the clock represents 1 second.

1. Alarm clock turn on/off Press and hold the button for 3 seconds.

2. Setting alarm clock
   Press “SET” button to enter the setting mode, and press “+” or “–” to adjust the alarm clock time.

3. Setting clock
   Press and hold the “SET” button for 3 seconds and press “+” or “–” to adjust the clock time.

Charging Status Indicator

1. Place your device directly on the IWC50 to start charging. Once your device starts charging, the green light will change to blue.
2. If your phone was placed improperly or any foreign object that might affect the device is nearby, the status indicator light will start flashing.

Charging Status Indicator Chart

Compatible Devices

1. Smartphones:
   Apple: iPhone® 13.12,11,11 Pro,11 Pro Max, Xs, Xs Max, XR, X, 8, 8
   Plus Samsung: Galaxy® S, 20 5G, 20+ 5G, 20 Ultra 5G, 10,10+,10e, 9, 9+, 8, 8+,7, 7 edge, 6, 6 edge, 6 edge+, 6 G9209, 6Active, Galaxy Note 10,10e, 10+, 9, 8, 7, 6, 5 Including other devices with wireless charging receiver built-in
   (Note: All devices must meet Qi standards for wireless charging).

2. Smart Watch:
   Apple: Apple Watch® S1, S2, S3, S4, S5, S6, SE.

3. Earbuds:
   Apple: AirPods® 1, AirPods® 2, AirPods® 3, AirPods Pro®

Product Specification

• Type C Input 5V/3A , 9V/2.22A , 12V.2A
• USB A Output 5V/1A
• Smartphone Output 5W, 7.5W, 10W, 15W
• Watch Output 2.5W (Max)
• Airpods Output 4W (Max)
• Dimension 7.87’’ X 3.9’’ X 4.87’’
• Weight 315g

1 YEAR LIMITED WARRANTY

The AT&T brands are used under license. Any repair, replacement, or warranty service, and all questions about this product should be directed to Concept 101 LLC at www.att.com/electronics or call 1(888) 920-8680 from the USA or Canada. Concept 101 LLC warrants that the product will be free from defects in material, parts and workmanship for the period of one (1) year from date of purchase. Concept 101 LLC agrees that it will, at its option, replace the defective product with either a new or remanufactured product equivalent to your original purchase during the warranty period. Please be advised the returned product must carry the proof of purchase.

Exclusions and limitations

Concept 101 LLC does not warrant that the product will work properly in all environmental conditions, and makes no warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particular purpose other than the purpose identified within this user’s manual. Concept 101 LLC has made every effort to ensure that this user’s manual is accurate and disclaims liability for any
inaccuracies or omissions that may have occurred. Information in this user’s manual is subject to change without notice and does not represent a commitment on the part of Concept 101 LLC. Concept 101 LLC reserves the right to make improvements to this user’s manual and/or to the products described in this user’s manual at any time without notice.
If you find information in this quick start guide that is incorrect, misleading, or incomplete, please contact us through our website.

Important Safety Instructions

1. Always clean the unit using a dry cloth, do not use liquids or any cleaners.
2. Do not use attachments not recommended by the manufacturer.
3. The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
4. The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.
5. Do not place the unit on an unstable table, stand, tripod, or bracket. This may result in serious personal injuries and damage to the unit.
6. If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.
7. Do not place the wireless charging cover solely on the wireless charger. Doing so may overheat the charger and cause fire. It may result in damaging the device or may result in serious burns.

Compliance with FCC Regulations

The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / television technician for assistance.

www.att.com/electronics

© 2022 Concept 101 LLC. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Concept 101 LLC, New York, New York 10018. Printed in China. Issue 1.1 AT&T 2/2022.
iPhone®, AirPods®, AirPods Pro® and Apple Watch® are registered trademarks of Apple Inc., registered in the U.S. and other countries. Airdots® is a registered trademark of Xiaomi Inc. registered in the U.S. and other countries. Samsung and Galaxy S are both registered trademarks of Samsung Electronics Co., Ltd. The ‘Qi’ symbol and Qi are registered trademarks of the Wireless Power Consortium. The ‘Quick Charge’ icon and Quick Charge™ are registered trademarks of Qualcomm Technologies, Inc. Other trademarks and trade names are those of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>