ATandT F000419R00 3 in 1 Qi2.0 New Gen. Power Drum User Manual
- June 26, 2024
- ATandT
Table of Contents
ATandT F000419R00 3 in 1 Qi2.0 New Gen. Power Drum User Manual
Specifications
Battery Capacity: 5000mAh Input: 5VDC/3A,9VDC/3A,12VDC/2.5A
Wireless Charger Output: up to 15W max
Apple Watch Output: up to SW max
USB-C Output: up to 20W max
Total Output: 20W max
Includes:
Magnetic Wireless Charger, 30W Travel Charger, USB-C Cable
Using your 3-in-1 Power Drum
Wireless Charger
- Power up the unit by using the provided USB-C cable andwall charger. Connect one end of the USB-C plug to thepower drum and the other end of the USB-C plug to thewall charger.
- Place your phone on the magnetic charger, and chargingwill automatically begin. If not, push the ON/OFF button.
- To charge your Apple Watch, slide out the holder and placethe watch properly on the charger. Charging willautomatically begin. If not, push the ON/OFF button.
- To charge using the USB-C output, use the correct cable(not included). Connect one end using the USB-C to thepower drum and the other end to your device. Push thepower button on the power drum, and your device willbegin charging automatically.
- *This product has a built-in 5000mAh battery, which cancharge the mobile phone and Apple Watch without connecting the power supply.
Charging Indicator Light Status
- Red flashing light: ERROR, please re-position your device
- Greenlight: CHARGING, lights up green, flashes 3 times and goes off (device will remain charging)
Battery power level
O 0 0 O 4lights =full battery
O O O @ 3lights =3/4 battery remaining
O O ® @ 2lights=1/2battery remaining
O ® ® @ 1light=1/4battery remaining
If the indicator light flashes, it means the battery is low, please charge.
Dieline#: SCPCN0077
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>