NEMO LUX W- D Double Emission Outdoor Wall Light Instruction Manual
- June 6, 2024
- NEMO
Table of Contents
NEMO LUX W-D Double Emission Outdoor Wall Light
Lamping
- This luminaire contains built-in LED lamps.
- The LED and the cables cannot be changed in the luminaire from the end-user.Please contact NEMO STUDIO (only authorized center).
- This product contains a light source of energy efficiency class
- Don’t look directly at the light source
Box contents
Installation
- Installation should be carried out by a suitable qualified installer.
- Make the wiring using a system that guarantees at least the IP grade of the spot
- Remove the 3 fixing screws of the base.
- -Remove the base in order to fix it to the wall with wall dowels (not included).
- After calculating the distance, make 2 holes in the wall and insert the 2 rawlplugs and appropiate screws. Connect the lamp to the primary circuit (230V) through clamp on the driver (included).
- Once the base is fixed, fit the luminaire to the base blocking it with the no head screws.
- Put the network cable in the sheat (shorten it if necessary) and secure it to the driver.
Example of connection (parallel connection)
EQUIPMENT DISPOSAL
This lamp has been manufactured according to Directive EU 2012/19/EU. In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
LIGHTING CLEANING SAFETY INSTRUCTIONS
- It is essential to clean the luminaire periodically at regular intervals to remove the dust, dirt, limestone or other contaminations.
- Before cleaning the luminaire, switch off the power supply and let it cool down. Not maintaining the luminaires may result in malfunctioning.
- Clean the luminaires using a soft cloth damped in lukewarm water. Do not use cleaning products which contain acidic substances. Do not use cleaner machines.
- Luminaires must not be used in corrosive environments, exposure to corrosive substances must always be avoided. Do not use grainy detergent and/or rough or abrasive sponges.
- Contact NEMO in case of doubts regarding lamp cleaning.
Read User Manual Online (PDF format)
Loading......