ATandT USB800 Global Modem Black User Manual

ATandT USB800 Global Modem Black User Manual

Let’s Get Started

1. Plug the AT&T Global Modem USB800 into a USB port on the computer .
2. The operating system will detect the device and install the necessary drivers.
3. Once installation is complete, the device will automatically connect to the network. Connection is complete when the indicator light is solid green.

Note: Compatible with the following:

• Microsoft® Windows® 7 and higher
• Mac OS 10.5 and higher
• Linux OS

Installation may vary depending on your operating system.

What else is in the box?

• AT&T Global Modem USB800
• Preinstalled Nano-SIM Card
• Quick Start Guide
  

Product Description

Manage the Device on the Web

Launch a browser and in the address bar enter http://attmanager/ or http://192.168.1.1. You will see this screen:

• Internet Status: Manage the network connection.
• Diagnostics: View device status and diagnostics for troubleshooting
• Settings: Manage advanced settings.
• Device Info: View device hardware and software details
• Customer Support: Contact information to connect with customer support team

Replace the Nano-SIM Card

The device comes with a nano-SIM card preinstalled. Should you need to swap out the nano-SIM card, follow these instructions:

1. Open the protective door by pressing on the cover with and sliding the door off.
2. Remove the SIM card by pushing forward on the exposed edge
3. Insert the new SIM Card with the gold contacts facing down.
4. Push the SIM Card until the card remains securely in the slot.
5. Replace the back cover and snap into place.
   Note: The SIM Card must remain in the wireless modem when in use.

Protect or Reset the Device

PIN Protect the SIM Card

1. Go to the management web site at http://attmanager/ and click  Settings on the menu.

Reset the Device
You can reset the device to its original factory settings. Note: If you reset the device to factory settings, all of your customizations will be lost.

1. Go to the management web site at http://attmanager/ and click Settings on the menu.
2. Click Preferences > Restore Factory Defaults

-OR

1. Remove the back cover from the device and locate the small pinhole labeled “Reset”
2. Insert a small pointed object into the hole to press the key.

Status Indicator Light

not available

Find More Information

Manage Your Account with myAT &T 

• On the web: att.com/myATT

Compatible device and online account required. Data and messaging rates may apply for download and app usage.

Need More Help?

• On the web: att.com/DeviceHowTo

Give us a Call

• 611 from any AT&T wireless phone
• 800.331.0500 or prepaid 800.901.9878

Network Indicators

The management web site will display a network indicator to reflect which AT&T wireless network you are connected to.

 Connected to the AT&T 4G LTE™ network
 Connected to the AT&T HSPA+ network

View Messages

The device can receive important messages from AT&T regarding your data plan or software updates. To review these, go to management web site at http://attmanager/ and click Messages on the menu.

AT&T Eco Rating 2.0 only applies to AT&T Global Modem USB800. For limited factors evaluated visit att.com/EcoSpace. Wireless Emergency Alerts is a registered Trademark and Service Mark of CTIA.

LTE is a trademark of ETSI. 4G LTE not avail. everywhere. Contains Lithium battery – recycle or dispose of properly. 2019 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property. All other marks are the property of their respective owners.

References

• att.com/DeviceHowTo
• EcoSpace 2.0 – AT&T

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>