Klipsch 5.0.4 Dolby Atmos Reference Cinema System Instruction Manual
- June 2, 2024
- Klipsch
Table of Contents
Klipsch 5.0.4 Dolby Atmos Reference Cinema System
INSIDE
ROOM PLACEMENT
-
Left and Right Main Channel Speakers
For optimum performance, Klipsch Group, Inc. (KGI) suggests placing your speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the distance separating the speakers -
Rear Surround Channel Speakers
The Reference Cinema System with Dolby Atmos utilizes identical satellite speakers for both the main and rear channels for seamless integration of your system. The rear surrounds should be placed at the same height as your main channels, ideally between 110-120 degrees from the listening position. The final surround speaker placement depends on your room’s characteristics. They are designed to recreate the sense of space and ambience that many of today’s surround sound technologies provide.
-
Center Channel Speakers
Center channel speakers are designed to place dialogue and primary sounds so that they appear to come from the video screen. The speakers should therefore be placed as close to the screen as possible, preferably directly on top of or below the screen.
CONNECTION
- Conventional Connection
- Using 24-14 gauge speaker wire, connect the RED “positive” (+) terminal of the LEFT speaker to the RED “positive” (+) terminal of your amplifier’s LEFT channel. Connect the BLACK “negative” (–) terminal of the LEFT speaker to the BLACK “negative” (–) terminal of your amplifier’s LEFT channel.
- Repeat the above procedure for connecting all remaining speakers to the appropriate amplifier channels. Make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment.
- Amplifier Requirements
Klipsch speakers are highly efficient and will operate easily on a wide variety of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low distortion. Due to the high output levels Klipsch speakers are capable of reproducing, exercise caution with the volume control. Excessive volume over long periods can permanently damage your hearing. Overdriving your amplifier could also damage your speakers. Check with your dealer or amplifier manual to make sure your particular amplifier best suited to your application. We want you listening for a lifetime.
WALL MOUNTING
ABOUT COMPANY
- Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos and the double-D symbol are registered trademarks of Dolby Laboratories
- ©2020, Klipsch Group, Inc. Klipsch Group, Inc. is a wholly-owned subsidiary of Voxx International Corporation.
- Klipsch and Keepers of the Sound are trademarks of Klipsch Group, Inc., registered in the United States and other countries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>