acer V7 Series V247W LCD Monitor User Guide
- June 5, 2024
- Acer
Table of Contents
acer V7 Series V247W LCD Monitor
Important safety instructions
Please read the following instructions carefully.
- To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location.
- Turn off the LCD monitor and unplug the power cord.
- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
- NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
- PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
- Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
- Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
- Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
- Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
- Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range may result in permanent damage.
- Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor-to-PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.
Attaching the monitor to the base
- Remove the monitor from the packaging.
- Attach the foot stand to the base. (for selected models)
- Turn clockwise to lock. Ensure that the base is locked onto the stand. (for selected models)
- Secure the base to the stand by turning the screw using the integrated tab or a suitable coin. (for selected models)
Connecting Your Monitor to a Computer
- Turn off your monitor and unplug your computer’s power cord.
- Connect Video Cable
* a. Make sure both the monitor and computer are powered-OFF.
* b. Connect the VGA video cable to the computer.
2. Connect HDMI Cable (Only HDMI-input model)
* A . Make sure both the monitor and computer are powered-OFF.
* b. Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s port.
3. Connect DP Cable (Only DP-input model) (Optional)
* a. Make sure both the monitor and computer are powered-OFF.
* b. Connect the DP cable to the computer.- Connect the Audio Cable. (Only Audio-Input Model) (Optional)
- Insert the monitor power cable into the power port at the back of the monitor.
- Plug the power cords of your computer and your monitor into a nearby electrical outlet.
External Controls
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE Declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of ecodesign requirements for energy-related product.
Notice: In order to prevent damage to the monitor, do not lift the monitor by
its base.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with EMC regulations. Notice: Acer monitor is
purposed for video and visual display of information obtained from electronic
devices.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified
to comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio
and TV reception. Caution Changes or modifications not expressly approved by
the manufacturer could void the user authority, which is granted by the
Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SPECIFICATION
LCD Panel
| Driving System| TFT Color LCD
---|---|---
Size| 24”W (61 cm)
Pixel Pitch| 0.270 mm (H) x 0.270 mm (V)
Brightness| 300 cd/m2 (Typical)
Contrast| 100000000:1 Max (ACM)
Viewable Angle| 178° (H) 178° (V) (CR=10)
Response Time| 4 ms (G to G)
Panel Type| In-Plane Switching
H-Frequency| VGA: 30 – 85 kHz
HDMI/DP: 30 – 94 kHz
V-Frequency| VGA/HDMI/DP: 56 – 76 Hz
Display Colors| 16.7M Colors
Dot Clock| 193.71 MHz
Maximum Resolution| VGA: 1920 x 1200 @ 60 Hz
HDMP/DP: 1920 x 1200 @ 75 Hz
Plug & Play| VESA DDCCI/DDC2B
Power Consumption (at 200 nits)
| On Mode| 28 W
Sleep Mode| 0.5 W
Off Mode| 0.3 W
Input Connector
| D-Sub
HDMI (Only HDMI-Input Model) DP (Only DP-Input Model)
Input Video Signal
| Analog: 0.7 Vp-p (standard), 75 OHM, Positive HDMI (Only HDMI-Input Model)
(Optional) DP (Only DP-Input Model) (Optional)
Speakers| 2 W x 2 (Only Audio-Input Model) (Optional)
Maximum Screen Size| Horizontal: 528.2 mm
Vertical: 342.4 mm
Power Source| 100-240 V, 50/60 Hz
Environmental Considerations
| Operating Temp: 0° to 40°C Storage Temp: -20° to 60°C Operating Humidity:
20% to 80%
Dimensions| 533.4 (W) x 435.45 (H) x 217.57 (D) mm
Weight (N. W.)| 4.73 kg (net)
Mechanism Specifications
| Tilt: -5° to +25° Swivel: No
Height adjustment: No Pivot: No
Detachable foot stand: Yes
External Controls
|
Switch/Buttons
| Power Button Input
Hotkey 1 Menu/Navi/OK
Hotkey 2
Functions
| Contrast Volume
Brightness Mute
Black Boost OD
Blue Light Refresh Rate Num
ACM On/Off Language
Super Sharpness OSD Timeout
H. Position (only Analog input model) Transparency
I. Position (only Analog input model) OSD Lock
Clock (only Analog input model) Input
Focus (only Analog input model) Auto Source Auto Configuration (only Analog input Wide Mode
model) Hot Key Assignment
Gamma DDC/CI On/Off
Color Temperature HDMI Black Level
Modes Quick Start Mode
sRGB Mode Display information
Grayscale Mode Reset All Settings
6-axis Saturate Exit
6-axis Hue
Specifications vary depending on model and/or region.
References
- TCO Certified - the world’s leading sustainability certification for IT products
- Homepage | ENERGY STAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>