Klipsch GIG XXL Portable Wireless Music System User Manual

Klipsch GIG XXL Portable Wireless Music System

Product Information

The GIG XXL is a portable Bluetooth party speaker that comes with a microphone and guitar input. It also has USB, Line In, and Line Out inputs for audio playback. The device has various buttons for controlling the microphone and guitar volume, master volume, bass, echo, light show, and reverse. It also has a battery charge indicator, USB charging capability, and True Wireless Stereo (TWS) feature for connecting two GIG XXL speakers.

Product Usage

Battery Charge

To check the battery charge level of the GIG XXL, unplug the device and press the button to trigger the battery charge indicator. The device can last up to 8 hours on a single charge.

Microphone and Guitar Input

The GIG XXL has microphone and guitar inputs that can be adjusted using the dedicated volume controls. Plug in your microphone or guitar to the corresponding input and adjust the volume accordingly.

USB Audio Playback

The GIG XXL can play MP3 and WAV files through its USB input. Simply plug in your USB drive and use the device buttons to control playback.

Line In/Line Out

The Line In and Line Out inputs allow you to connect external audio devices to the GIG XXL. Use a 3.5mm audio cable to connect your device to the Line In input and use the device buttons to control playback. Use the Line Out to connect your GIG XXL to an external amplifier or speaker.

True Wireless Stereo (TWS)

If you have two GIG XXL speakers, you can use the TWS feature to connect them wirelessly and play music in stereo. Hold the button on both speakers for 3 seconds to activate TWS mode.

Care and Cleaning

To clean your GIG XXL, use a dry cloth only. Do not use water or any other cleaning solutions. Make sure to keep the device away from heat sources and do not block any ventilation openings.

Important Safety Instructions

Read and keep the safety instructions provided in the manual. Follow all instructions and heed all warnings. Do not use the device near water and do not overload wall outlets or extension cords. Make sure to disconnect the device from the AC mains when not in use.

INSIDE

Your power cable may be different

BUTTONS

• Microphone Input
• Guitar Input
• USB
• Line In
• Line Out
• Guitar Volume
• Echo
• Reverse
• Play / Pause
• Forward
• On / Off
• BASS
• Light Show
• Bluetooth®
• Microphone Volume
• Battery Charge
• Master Volume

BLUETOOTH® WIRELESS TECHNOLOGY

Double Press

* Example only. Your device may differ.

BATTERY CHARGE

To check the amount of charge, unplug the GIG XXL and press the button to trigger the battery charge indicator.

MICROPHONE

GUITAR

LIGHT SHOW

If the strobe light is on and you want it off, press and hold the button.

USB

USB AUDIO

MP3 and WAV Files Only!

USB CHARGING

The GIG XXL must be powered on to charge your device.

LINE IN / LINE OUT

CARE AND CLEANING

TWS (TRUE WIRELESS STEREO)

For 2 GIG XXL Only!

Hold 3 Seconds on BOTH Speakers

If one or both speakers are already connected via Bluetooth:

Double Press

Hold 3 Seconds on ONE Speaker

Model Name: Portable Bluetooth Party Speaker
Model: GIG XXL

IMPORTANT SAFETY INSTRUCTIONS!

1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. ONLY USE attachments/accessories specified by the manu-facturer.
11. USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
13. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.
15. To completely disconnect this apparatus from the AC Mains, disconnect the power supply plug from the AC receptacle.
16. The mains plug of the power supply apapter shall remain readily operable.
17. DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.

WARNING: No naked flame sources – such as candles – should be placed on the product.

THIS PRODUCT USES LITHIUM-ION BATTERIES.
IF MISUSED OR ABUSED THIS CAN RESULT IN:

1. Smoke or gas hazard
2. Heat hazard
3. Fire hazard
4. Explosion hazard

WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
WARNING: Do not handle leaking or damage Lithium batteries.
WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Operating temperature between 32ºF/0ºC and 113ºF/45ºC. Altitude not higher than 5000m (air pressure not less than 54.0kPa).
Please dispose of any used batteries properly, following any local regulations. Do not incinerate.
In Singapore, please only use the provided 3-pin detachable plug adapter to charge or power the product.
WARNING: This product is intended to be operated ONLY from the AC Voltages listed on the back panel or included power supply of the product. Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable power cord, use only the type provid-ed with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer.

FCC

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by Klipsch Group, Inc. could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada Regulatory Information
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Regulatory Information
CAN ICES-003 (B)/NMB-003 (B)

IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

EU / UK COMPLIANCE INFORMATION

Operation frequency band (Bluetooth): 2402 MHz – 2480 MHz Max. transmitted RF power < 10 dBm
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2014/35/EU; European Union EMC Directive 2014/30/EU; European Union Restriction of Hazardous Substances Recast (RoHS) Directive 2011/65/EU; European Union WEEE Direc-tive 2012/19/EU;European Union Eco-Design Directive 2009/125/EC; European Union Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Directive 2006/121/EC; European Union Radio Equipment Directive (RED) 2014/53/EU.
Hereby, Klipsch Group Inc. declares that this product is in compli-ance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
You may obtain a free copy of the Declaration of Conformity by contacting your dealer, distributor, or Klipsch Group, Inc.’s worldwide headquarters. Contact information can be found here:
http://www.klipsch.com/Contact-Us
EU importer: Klipsch Group Europe B.V.
Address: Kapteynstraat 1, 2201 BB, Noordwijk, the Netherlands
UK importer: Henley Audio Ltd.
Address: Unit B, Park 34, Collett, Didcot, Oxfordshire, OX11 7WB

WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU) and Norway.
his appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

EPILEPSY WARNING
A small percentage of people may experience epileptic seizures when viewing flashing lights.

3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM

References

• Speakers, Headphones, and Premium Home Audio | Klipsch
• Contact Us | Klipsch

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>