UMAY Fitness U50 Home Folding 3 Level Incline Treadmill with Pulse Sensors User Manual
- June 15, 2024
- UMAY Fitness
Table of Contents
Umay Fitness
U50 Treadmill
User’s Manual
I. Important Precaution
MINIMUN
USER
HEIGHT| 140 cm| | MAX
USER
WEIGHT| 300 Lbs
---|---|---|---|---
WARNING| CORRECT LUBRICATION OF THE TREADMILL IS REALLY IMPORTANT. THIS
LUBRICATION MUST BE PERFORMED REGULARLY DEPENDING ON EACH PERSON, EVEN BEFORE
ITS FIRST USE.
YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTECTIONS, PURCHASE RECEIPT, MANUAL, AND COMPONENTS DURING THE GUARANTEE PERIOD.
---|---
In order to decrease the risk of suffering severe injuries, read carefully all the important instructions and warnings regarding the use of a treadmill before using it.
UMAY FITNESS doesn’t take any responsibility for personal injuries or property damages resulting from the use of this product.
1-Before starting any workout program, consult your doctor. It’s especially
important for people older than 35 years old, people with a health problem,
and pregnant women.
2-Use the equipment as explained in the instructions manual.
3- Keep the equipment in an enclosed area, away from dust or humidity. Don’t
store it in a garage, indoor backyard, or near the water. Humidity, dust and
water could lead to a malfunction of the equipment, annulling its guarantee.
4-Place the unit on a flat surface. If the surface is uneven, the proper
functioning could be affected. Some models include levelers or leveling
threads behind the legs, helping the leveling. Please read the manual to
verify if your unit is provided with one of them…
5-The unit must be placed in a ventilated area. Don’t use it in places with
sprays or oxygen dispensers. The air you breathe may be affected and cause an
accident.
6-Keep children younger than 12 years old and pets away from the equipment.
Keep the security distance.
7- Check in the manual the maximum weight your equipment can support.
Excessive weight could lead to a malfunction in the operating system, which
won’t be covered by the guarantee.
8-If your equipment is working through a power supply: make sure that the
power cord and plug are in good condition. Carry out the connection only when
the circuit has a ground connection, otherwise, it could cause damages to the
equipment or in the property which the guarantee won’t cover. Power cords must
be away from hot surfaces.
9-If it is a battery-powered unit: check and make sure that they are charged
enough so the display will fully function.
10-If your unit works with an electric supply: check the speed it can reach,
for your security. The best is to adjust gradually the speed in order to avoid
sudden changes.
11-If your unit works through an electric supply: never leave the machine
unattended while it’s working.
12-Check and tighten all screws on a regular basis, because due to vibrations
screws and nuts tend to loosen. Damages caused by a lack of maintenance won’t
be covered by the guarantee.
13-Two people will be needed in order to take the unit from the package.
Otherwise, the damages caused at this moment won’t be covered by the
guarantee.
14-Don’t let any object fall into the grooves.
15-If the unit works through a power cord: unplug always the power cord before
cleaning it, after the workout, and before performing any maintenance duty.
16-If you start feeling pain or dizziness while training: STOP IMMEDIATELY.
17- You must preserve the original packaging with its protections, manual,
and components during the guarantee period.
18-This electronic product can’t be thrown under any circumstances into
municipal rubbish bins. With the aim of preserving the environment, this
product must be recycled according to the applicable law of your country.
Please contact your town council to know more about this procedure.
19-Should you need technical assistance or advice with the installation of
pieces, You can get in touch with us through
866-950-8629.
YOU MUST KEEP THE PURCHASE RECEIPT IN ORDER TO HAVE ACCESS TO THIS
SERVICE
KEEP THIS ADVICE FOR FUTURE REFERENCES
II. Main Technical Features
- Stand Tube
- Handrail Foam
- LED Screen
- Security Key
- Motor Cover
- Easy-self Lubrication Hole
- End Cap
- Running Belt
- Side Strip
- Base
Input Voltage
|
110V±10%
---|---
Frequency
| 60 Hz
Running area|
44.1″ x 16.1″
Function
| Time, Speed, Distance, Calorie, Heart Rate, Easy-self Lubrication
Speed|
0.6-8.7 MPH
Max user weight
| 300 LBS
Power|
3.0 HP
III. Assembly
No.
| Fittings| Qty
---|---|---
1| M8*20|
6
2
| M8*40| 2
3| M8 Flat gasket|
4
4
| Incline bolt| 2
5| Tile type gasket|
4
6
| Silicone oil| 1
7| 5mm wrench|
1
8
| Multi- wrench| 1
9| Main frame|
1
STEP 1
- Carry out the machine from the package by two persons and place it lightly on a flat floor, And put other fittings beside the machine. Lift up the stand tube and electronic watch according to picture 1(make sure not to press the signal wire)
- Picture 2: #1 M840 screw, #2 Tile-type gasket, #3 Flat gasket, #4 M840 screw, and use a 5mm wrench to fasten the base.
STEP 2
- Use 2 pcs M8*20 screws with 2pcs flat gaskets to fasten the connection between the panel and side frame by a 5mm wrench.
STEP 3
- Press the side cover gently until it is stuck.
- Put on the safety key before using the treadmill.
IV. Workout Guidelines
Warming up
BEWARE: Before starting to use this or any exercise programs, consult your doctor. This is specially important for people older than 35 years old, or for people with health problems. If your equipment is provided with a pulse sensor, you must keep in mind this isn’t a medical instrument. Several factors can vary the accuracy of the heart rate interpretations. The pulse sensor is just a help for the work outs, determining the general tendencies of the heart rate.
PROGRAMM WITH WARM UP WORKOUTS:
WARM UP: Start stretching and slightly activating the muscles between 5 and 10 minutes. The warm up will increase your corporal temperature, your heart rate and your blood flow, making you ready for the workouts.
- WORKOUT FOCUSED ON THE TRAINING AREA: Do some exercises during 20-30 minutes with your heart rate (don’t maintain your heart rate more than 20 minutes during the first weeks of the exercise program). Breath constantly and deeply during the workout (never hold your breath).
- COOL DOWN: Finish with stretching exercises during 5-10 minutes. Stretching increases the flexibility of your muscles and help you to avoid injuries after the workouts.
FREQUENCY OF THE WORKOUT: In order to be fit or improve your shape, complete three workout sessions each week, with a rest day between the workouts. After some moths of regular training, you will be able of completing up to five workouts a week.
V. Treadmill Operation
- LED Display
- Speed –
- Program
- Stop
- Start
- Mode
- Speed +
The Method of Use:
“Mode” Setting:
- TIME: PRESS SPEED +/-
DISTANCE: PRESS SPEED +/-
CALORIES: PRESS SPEED +/-
“Program” Setting:
VI. Maintenance
This product must be earthed. If the power cord is damaged, it must be replaced with a manufacturer recommended power cord.
DO NOT TANGLE THE POWER CORD
REGULAR MAINTENANCE OF THE TREADMILL
- STORAGE: Keep your equipment in a enclosed place, away from dust or humidity. Don’t store it neither in a garage or in a indoor backyard, or near the water. Humidity, dust and water could damage it and have an effect on its functioning
- ELECTRIC CABLE: Make sure that the cable and plug are in perfect conditions. Electric cables must be away from hot surfaces
- SCREWS AND CONNECTING CABLES: Supervise and tighten the screws on a regular basis, because due to the vibration the screws and nuts tend to loosen.
LUBRICATION: It’s a correct lubrication of the treadmill with silicon oil or teflon is really important. This lubrication must be performed regularly depending on its use even before the first use. There is a hole for adding oil on motor cover. After starting machine, please change to highest speed, then add the oil into the hole, the oil will be spread from the middle between the running belt and board.
| < 3 hours/week | 2 months |
|---|---|
| 4 – 7 hours/week | 1 month > |
| 8 hours/week | 15 days |
- ALIGN AND TIGHTEN THE BELT OF THE TREADMILL
- ALIGN THE BELT: Due to its use, the belt can move off center. If the belt has moved to the left, start treadmill and increase the speed to 3MPH. Use the 5mm Wrench to turn the fixed left bolt clockwise or turn the fixed right bolt counterclockwise. Don’t tighten the belt too much in order to be able to walk. Repeat this procedure until the belt is properly aligned.
- If deviate to the left, then adjust the screw on the left side clockwise or the screw on the right side anticlockwise.
- If deviate to the right, then adjust the screw on the right side clockwise or the screw on the left side anticlockwise.
- TIGHTEN THE BELT: (if the belt slips on the treadmill when walking). Start treadmill and increase the speed to 3MPH.Using the 5mm wrench, turn both bolts 1/4 clockwise. If the belt is properly tight to walk, you must be able to pull up each side of the belt 5 or 7 cm off the platform. Be careful and maintain the belt aligned. Repeat this procedure until the belt is properly tightened.
- if the running belt slips, use 6mm wrench, turn both sides bolts 1/4 clockwise. Repeat this procedure until the belt is properly tightened.
-
TIGHTEN THE DRIVE BELT: if the drive belt becomes loose after using for a period of time, you need to:
(1) Open the motor cover.
(2) Use the 5mm wrench to turn the adjusting bolt clockwise.
Repeat this procedure until the drive belt is not slippery anymore. -
CLEANING: Don’t use abrasive products. A damp cloth is enough.
-
LEVELING: If your unit is provided with leveling wheels, please adjust them in order to avoid vibrations and therefore malfunctions.
-
KEEP THESE MAINTENANCE ADVISES FOR FUTURE REFERENCES
VII. Trouble Shooting
Error Code
| Reason| How to solve
---|---|---
NO DISPLAY| A) electricity not connected|
Connect the electricity
B) Power switch not turn on
| Turn on power switch
C) PCB no power or broken|
Press over-load protector or change new pcb
D)signal wire not connected
| Re-connect signal wire or change new one
E) computer broken|
Change new computer
F) background light broken
| Check background light wire or change new one
E-01| Poor connection between the display and controller.|
Check each joint, change a new line if it is broken.
E-02
| Over current protection| Turn off and re-start machine, if still has
problem, need to check motor or main PCB if they are broken
E-03| Over-load protection|
Turn off and re-start machine, if still has problem, need to check motor or main PCB if they are broken
E-10
| Main PCB Over-heating protection| Turn off and re-start machine, if still
has problem, need to check motor or main PCB if they are broken
E-12| Over-voltage protection|
Check the input voltage is normal or not, then turn off and re-start machine. If still has problem, change the main PCB.
E-14
| Motor wire broken| Chang new wire or new motor
E-16| Main PCB broken|
Change the main PCB
—
| Safety key is missing|
Please place safety key on console
Correct lubrication of the treadmill with Lubricant is REALLY IMPORTANT. This lubrication must be performed regularly depending on each person, even before its first use.
You must preserve the original packaging with its protections, PURCHASE RECEIPT, manual, and components during the guarantee period
VIII. The Obvious Danger List
No.
| Description|
Associated
---|---|---
1.
| Mechanical Hazards|
1.1| Crushing|
Inclining
Folding
1.2| Shearing|
Inclining
Folding
1.3| Drawing-in Or Trapping|
Rear roller
Drive system
1.4| Falling|
Sudden starts/stops
Excessive speed variation
Support failure
1.5
| Abrasion| Contact with moving running surface
1.6| Slippery Surface|
Slipping and falling
1.7
| Stored Energy| Folded treadmills falling down
Springs or elastic devices prior to assembly
2.
| Electrical Hazards|
2.1| Electrocution|
Contact with live components
3.
| Thermal Hazards|
3.1| Burns|
Contact with hot surfaces
4.
| Hazards generated by neglecting ergonomic principles in design process|
4.1| Ineffective ergonomics|
Size or location of support surfaces
Running surface dimensions
4.2| Human errors human behaviour|
Reasonably foreseeable misuse
5.
| Noise Hazards|
5.1| Disturbing acoustic communication|
Moving treadmill motor and belt
IX. UmayCare
This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law.
Contact Umay 7/24 response
7*24 online California-based customer service team to solve after-sales problems without obstacles
Return Policy: 30-Day Hassle-Free Return and Exchange
Customer Service: California-Based Service Team Providing personalized solutions to ensure 100% customer satisfaction
Exclusive Maintenance Service: We honor our commitment to quality and durability by offering free maintenance tools for orders within 6 months, including lubricants and remote control
Contact Number:866-950-8629
UmayCare Team E-Mail:[email protected]
Official Website:www.umayofficial.com
You must preserve the original packaging with its protections, purchase receipt, manual and components during the guarantee period.
Documents / Resources
| UMAY
Fitness U50 Home Folding 3 Level Incline Treadmill with Pulse
Sensors
[pdf] User Manual
U50 Home Folding 3 Level Incline Treadmill with Pulse Sensors, U50, Home
Folding 3 Level Incline Treadmill with Pulse Sensors, Incline Treadmill with
Pulse Sensors, Treadmill with Pulse Sensors, Pulse Sensors
---|---