lED World LT-932-OLED 32 Channel DMX/RDM LED Color Decoder Instruction Manual

lED World LT-932-OLED 32 Channel DMX/RDM LED Color Decoder

• Before you begin, read all warnings and installation instructions and save for future use.

SAFETY

WARNINGS

• This product is intended to be installed and serviced by a qualified licensed electrician.

• Install in accordance with the National Electric Code, and local regulations. Disconnect power before installing or servicing. Only power with a regulated (listed) constant voltage Class 2 power
  supply (12-24V DC).

• Ensure applicable wire is installed between driver, fixture, and any controls in between.

• When choosing wire, factor in voltage drop, amperage rating and type (in-wall rated, wet location rated, etc.). Inadequate wire installation could overheat wires and cause fire.

• This product is rated for indoor installation and only for dry locations. Avoid direct sun light.

• Do not modify this product beyond the instructions in this guide or the warranty will be voided

• Wiring diagrams in this installation guide for basic installations. Please carefully review your installation before proceeding.

PRODUCT FEATURES

• Designed for hi-power multiple channels application
• 32 channels output, Max. 3A current per channel and up to 2304W output power.
• Easy address setting with OLED screen and the button control.
• 4 control modes: single color, CCT, RGB and RGBW
• Support 4 kinds of DMX ports with signal isolation function: XLR-3, XLR-5, RJ45 and green terminal (with signal amplifier function).
• DM remote management protocol for parameters browsing & setting, DMX address setting, equipment recognition operations.
• 16bit/8bit resolution and optional multiple dimming curves

PRODUCT PARAMETER

COMPONENT DESCRIPTION

OLED SCREEN INTERFACE INSTRUCTIONS

Main Screen

• Press the “M” key and switch entries.
• Press the “∧” or “∨” key, parameter adjustment.
• Long press the “M” key, back to the main screen
• Exit: back to the previous screen.

1. DMX Address Setting
   • Press the “∨” or “∧” key to set the DMX address
   • Range: 1~512
2. PWM Frequency
   • Press “v” ∧or key to switch frequency Frequency Set Options: High Std (standard)
3. Mode
   • Press the “v” or “∧” keys to switch mode
   • Mode Set Options : Dim СТ RGB RGBW
4. Resolution
   • Press the “v” or ∧”key to switch the resolution
   • Resolution set Options 8bit 16bit
5. Dimming Curve
   • Press “v” or ∧ key to switch the dimming curve
   • Binding Curve set Options: Linear 0.1~9.9
6. Tool
   • Press the “∧” or “∨” key to enter a submenu
   • EXIT (Press “∨” key)
7. Test
   • Press the”∧” or “∨” key to enter submenu
   • Brightness setting Range: 0~255
   • Next Page (Press “∧” or “∨” key ) EXIT (Press ”∨” key)

ADDRESS SETTING TABLE

Mode

|

W

|

CCT

|

RGB

|

RGBW

---|---|---|---|---
Address Quantity|

8

|

16

|

24

|

32

Resolution

| 8bit| 8bit| 8bit| 8bit

Channel

| 1| 001| 001| 001| 001
2| 001| 002| 002| 002
3| 001| 001| 003| 003
4| 001| 002| 003| 004
5| 002| 003| 004| 005
6| 002| 004| 005| 006
7| 002| 003| 006| 007
8| 002| 004| 006| 008
9| 003| 005| 007| 009
10| 003| 006| 008| 010
11| 003| 005| 009| 011
12| 003| 006| 009| 012
13| 004| 007| 010| 013
14| 004| 008| 011| 014
15| 004| 007| 012| 015
16| 004| 008| 012| 016
17| 005| 009| 013| 017
18| 005| 010| 014| 018
19| 005| 009| 015| 019
20| 005| 010| 015| 020
21| 006| 011| 016| 021
22| 006| 012| 017| 022
23| 006| 011| 018| 023
24| 006| 012| 018| 024
25| 007| 013| 019| 025
26| 007| 014| 020| 026
27| 007| 013| 021| 027
28| 007| 014| 021| 028
29| 008| 015| 022| 029
30| 008| 016| 023| 030
31| 008| 015| 024| 031
32| 008| 016| 024| 032

Mode

|

W

|

CCT

|

RGB

|

RGBW

---|---|---|---|---
Address Quantity|

16

|

32

|

48

|

64

Resolution

| 16bit| 16bit| 16bit| 16bit
Channel| 1| 001

002

| 001

002

| 001

002

| 001

002

2| 001

002

| 003

004

| 003

004

| 003

004

3| 001

002

| 001

002

| 005

006

| 005

006

4| 001

002

| 003

004

| 005

006

| 007

008

5| 003

004

| 005

006

| 007

008

| 009

010

6| 003

004

| 007

008

| 009

010

| 011

012

7| 003

004

| 005

006

| 011

012

| 013

014

8| 003

004

| 007

008

| 011

012

| 015

016

9| 005

006

| 009

010

| 013

014

| 017

018

10| 005

006

| 011

012

| 015

016

| 019

020

11| 005

006

| 009

010

| 017

018

| 021

022

12| 005

006

| 011

012

| 017

018

| 023

024

13| 007

008

| 013

014

| 019

020

| 025

026

14| 007

008

| 015

016

| 021

022

| 027

028

15| 007

008

| 013

014

| 023

024

| 029

030

16| 007

008

| 015

016

| 023

024

| 031

032

17| 009

010

| 017

018

| 025

026

| 033

034

18| 009

010

| 019

020

| 027

028

| 035

036

19| 009

010

| 017

018

| 029

030

| 037

038

20| 009

010

| 019

020

| 029

030

| 039

040

21| 011

012

| 021

022

| 031

032

| 041

042

22| 011

012

| 023

024

| 033

034

| 043

044

23| 011

012

| 021

022

| 035

036

| 045

046

24| 011

012

| 023

024

| 035

036

| 047

048

25| 013

014

| 025

026

| 037

038

| 049

050

26| 013

014

| 027

028

| 039

040

| 051

052

27| 013

014

| 025

026

| 041

042

| 053

054

28| 013

014

| 027

028

| 041

042

| 055

056

29| 015

016

| 029

030

| 043

044

| 057

058

30| 015

016

| 031

032

| 045

046

| 059

060

31| 015

016

| 029

030

| 047

048

| 061

062

32| 015

016

| 031

032

| 047

048

| 063

064

LOW VOLTAGE INPUT:

• Input power to the DC+ and DC- with Class 2 regulated (low voltage) power source. Verify that the power supply is a listed, regulated Class 2 power supply.
• If attaching RGB Flex Strip to LT-932-OLED DMX512, correct polarity is imperative; Black (may be White) wire is positive (+) and goes to “V+” terminal. The common format is to insert the Red wire to Ch 1, Green wire to Ch2 and Blue wire to Ch3, so and so forth. If unit is set to DMX Channell, the unit will automatically occupy channels 1,2,3 on the master DMX console.

LED FIXTURE CONNECTION DIAGRAM

• Warning: Input voltage must be identical to output voltage of the LED Fixture!
• WIRE 6-8 MM (0.25-0.30″)
• The exposed wire should not be more than 6- 8 mm long & solder tip (tinned). Do not allow Wires to cross and insure all exposed wire is fully inserted into the screw terminals. Hand-tighten screw terminals.
• DC1~DC4 Power Input: Use 13~ 10 AWG wire
• Output Terminals: Use 16~12 AWG wire

WIRING WITH MASTER CONTROLLER

Option 1:

Option 2:

DMX/RDM TERMINAL CONNECTION OPTIONS

1. XLR-5 parallel connection

2. XLR-3 parallel connection

3. Green Terminal (AMP signal amplifier terminal) connection

   • Note: AMP interface can be used for signal amplication when there are many DMX decoders connected or the signal line is too long. Signal application
     should not be more than 5 times continuously.

4. RJ45 parrallel connection

WARRANTY

• This product comes with 3 years It warranty, lifelong technical maintenance. The warranty excludes improper connection to power supply, power overload, manual damages and improper use.
• Repair or replacement as provided under this warranty is exclusive remedy of the customer. We shall not be liable for any incidental or consequential damages for bench of any stipulation in this warranty.
• LED World Inc. | # 130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 1.1 12/22/22
• Copyright @ 2022 LED WORLD INC*. All Rights Reserved. We are not responsible for errors or omissions. Product and specifications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

References

• LED World Canada - A Commercial LED lighting supplier
• LED World Lighting - A Commercial LED lighting supplier

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>