Pass & Seymour WWRL10WHCCV2 Smart Wi-Fi Switch installation Manual
- June 2, 2024
- Pass & Seymour
Table of Contents
Pass & Seymour
Pass & Seymour WWRL10WHCCV2 Smart Wi-Fi Switch
Specification
- OPERATION MODE: Automatically Off
- CONNECTOR TYPE: Screw
- BRAND: Pass & Seymour
- SWITCH STYLE: Dimmer Switch
- MATERIAL: Polycarbonate
- ITEM DIMENSIONS LXWXH: 17 x 1.77 x 3 inches
- CIRCUIT TYPE: 3-way
- MOUNTING TYPE: Wall Mount
- INTERNATIONAL PROTECTION RATING: IP54
- CONTROLLER TYPE: Vera, Amazon Alexa
Introduction
Anywhere you are, you can easily control ALL of your Avatar smart light bulbs with the “Smart Life” App once you have connected to 2.4 GHz Wi-Fi. No hub is needed, and the bulbs have a brightness of 910 lumens. With 16 million different hues, you can create the perfect lighting environment. The smart light features a number of color options that can be changed depending on the situation. depending on your needs, lighter or darker. The Alexa light bulbs are compatible with Alexa and Google Home, and you can use voice commands like “Alexa, Turn on the light” to reduce the brightness and colors of the smart lamp. The light source is an LED bulb post, which has a long service life of 30,000 to 50,000 hours and low energy usage.
SMART SWITCH INSTALLATION
NOTE: A neutral wire is required for installation.
- Turn off power at your breaker
- Identify the wires
REMOVE THE EXISTING SWITCH:
- it may be helpful to take a photo of how the old switch was wired
WIRE THE SMART SWITCH
- Connect the smart switch white NEUTRAL wire to the neutral wire(s) in the box (there may be several). Twist and cap them off with the red wire nut.
- Connect the smart switch LOAD wire on the load wire in the box.
- Connect the smart switch HOT wire to the hot wire(s) in the box.
- Connect the smart switch green GROUND wire to the ground wire(s] in the box.
- Cap the yellow traveler wire with a wire nut. If more than one switch controls the light, then conned the smart switch yellow TRAVELER wire to the wire going to the other switch.
NOTE: The smart switch will work with existing 3-way switches and can be installed in either location.
TEST THE SMART SWITCH
DOWNLOAD THE LEGRAND SMART LIGHTS APP
- Login or Create a Legrand account to enable control from your phone.
- Click add a device and scan the barcode on the front of the device to connect the device to the app.
FAQs
Does it pair with the Ring app?****
No, this switch does not pair with ring.
Does the rocker switch actually move into the up and down position or does it stay centered and just trigger buttons when clicked up or down?****
It stays centered. It is a momentary push on or off, and doesn’t even matter whether you push on the top or bottom of the switch. If the light is off, pushing either the top or bottom of the switch will turn the light on. And if the light is on, again pushing either the top or bottom of the switch will turn it off.
can I buy a pair of those and to do a 3-way switch control for the lamp wirelessly?****
To use in a 3-way wiring situation you would pair this smart switch with a regular 3-way switch.
does it work whit android smart phone?****
Yes, there is a Legrand app for android that will allow you to control and add lights. This switch does not require a smart hub, the controller is in the cloud and it will not work with the app if internet connectivity is lost to the switch.
Will this work with an iPhone Legrand app since there is no homekit functionality?****
I use the Legrand smart lights app on my iPhone.
How do you activate pairing mode on a smart light switch?****
Ten times, press the switch button’s top. Blue blinks will appear three times on the indicator light at the base of the switch. When the indication light stops flashing, the smart switch will have been successfully linked with the hub. When you notice The device(s) have been added in the app, touch on Close!
A smart switch can be manually turned on and off.****
Yes, you can still turn on and off the lights as usual, but these smart switches give you considerably more control over the lighting, fans, and electrical appliances in your house. You can access your switches whenever you need to, from anywhere, using an app on your smartphone.
How can a smart switch be reprogrammed?****
To start the app-config procedure, press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green. To restore the smart switch or plug to its default settings: To reset the Smart switch to factory defaults, press and hold the reset button until the Wi-Fi LED blinks amber quickly (approximately 10 seconds).
Exactly why won’t my smart switch connect?****
Frequently, the USB port is broken or the cable is damaged. You might get the Smart Switch not connecting problem in any scenario. Check to see whether your PC recognizes a different phone when you connect it using the same cord. Also, try plugging the USB cord into a different port to see if the problem still exists.
I don’t have a neutral wire; can I still install a smart switch?****
Yes, a smart switch can be installed without a neutral cable. A neutral wire is not necessary for all smart light switches and dimmers. These are excellent for do-it-yourself installations seeking a reliable smart lighting solution.
Smart switches are they constantly on?****
Smart lighting is related to all of the others. The switches are therefore always on.
Do both phones need Smart Switch installed?****
Smart Switch needs to be installed on both Android smartphones. The Samsung Galaxy device is the only one that has to have the app loaded for iOS devices.
Which wire goes where on a light switch really matters?****
It doesn’t matter which wire you put on each switch terminal because they are all interchangeable.
Why is the smart switch on my lights flashing?****
It is most likely not actually associated with your HomeKit app if this is the case. The light will start flashing if you press and hold; it will then keep flashing until you hear a second click. After that, couple it, and the light ought to go out.
Why won’t my smart switch work?****
There are a few things you may try to fix Smart Switch if it can’t finish a transfer, won’t recognize your device when used with a PC or Mac, or crashes unexpectedly. You might attempt to delete the app’s data or remove pointless items from your device to make room for the transfer.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>