Pass Seymour 2624-GRY Four Way Decorator Switch Instructions
- June 16, 2024
- Pass & Seymour
Table of Contents
Instructions
WIRING INFORMATION
-
TURN OFF POWER.
-
LOOSEN TERMINAL SCREWS.
-
CONNECT WITH INSULATED COPPER CONDUCTORS (SOLID OR STRANDED). DO NOT TIN CONDUCTORS.
CAUTION:USE WITH COPPER WIRE ONLY.
ATTENTION:EMPLOYER UNIQUEMENT AVEC FIL DE CUIVRE. -
DO NOT EXCEED MARKED ELECTRICAL RATING.
-
FOR PROPER WIRING PROCEDURE.
A. FOR BACK WIRED DEVICES, SEE FIG. A
a) STRIP WIRE(* 14-710 AWG)11/116 LONG.
b) INSERT STRIPPED WIRE IN BACK SLOT UNDER CLAMP.
B. FOR SIDE WIRED DEVICES, SEE FIG. B
a) STRIP WIRE(’ 14-°10 AWG)15/16 LONG.
b) BEND WIRE AROUND SCREW. -
TIGHTEN SCREWS TO 12-15 INCH POUNDS.
NOTE: WHEN FLUORESCENT LOADS ARE CONTROLLED BY LIGHTED SWITCHES THE LAMP MAY OCCASIONALLY FLICKER WHEN THE SWITCH IS IN THE OFF POSITION. -
AGREEN HEX, HEAD SCREW (OR GREEN PIG TAIL) IS PROVIDED TO GROUND THE MOUNTING STRAP WHERE REQUIRED.
-
INSTALL SWITCH AND WALL PLATE SECURELY TO ELECTRICAL BOX.
-
TURN ON POWER.
341056
Documents / Resources
| Pass
Seymour 2624-GRY Four Way Decorator
Switch
[pdf] Instructions
2624-GRY, 2624-GRY Four Way Decorator Switch, Four Way Decorator Switch,
Decorator Switch, Switch
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>