LANCOM WLC-1000 Wlan Management Centrally User Guide
- June 4, 2024
- LANCOM
Table of Contents
LANCOM WLC-1000 Wlan Management Centrally
Product Description
-
USB interface
You can use the USB interface to connect a USB printer or a USB storage device. -
Serial configuration interface
Use the included serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring. -
SFP / TP Ethernet interfaces (combo ports)
Insert suitable SFP modules into the SFP ports. Choose cables compatible with the SFP modules and connect them as described in the module’s documentation. SFP modules and cables are not included. -
If desired, alternatively connect the ETH 1 – ETH 4 TP Ethernet interfaces to your PC or a LAN switch using one of the enclosed cables with the kiwi-colored connectors.
-
TP Ethernet interface
Use one of the enclosed cables with the kiwi-colored connectors to connect the interface ETH 5 to your PC or a LAN switch. -
Reset button
Pressed up to 5 seconds: device restart
Pressed until first flashing up of all LEDs: configuration reset and device restart -
The power connector and grounding point (device back side)
-
Supply power to the device via the power connector. Please use the IEC power cable supplied (separately available for WW devices).
-
ATTENTION: High touch current possible! Connect to earth before connecting the power supply. For this purpose, remove the existing blind screw and use the enclosed grounding screw instead.
Mounting & Connecting
Initial Startup
Before initial startup , please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Please observe the following when setting up the device
- The main plug of the device must be freely accessible.
- For devices to be operated on the desktop, please attach the adhesive rubber footpads
- Do not rest any objects on top of the device and do not stack multiple devices
- Keep all ventilation slots of the device clear of obstruction
- Mount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.
The additional power LED statuses are displayed in a 5-second rotation if the device is configured to be managed by the LANCOM Management Cloud. This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Support
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen,
declares that this device is in compliance with Directives 2014/30/EU,
2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU Declaration of Conformity is available at the following
Internet address: www.lancom-systems.com/doc/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>